tungsten and molybdenum

... formed molybdenum and tungsten crucibles and supplies them in all commonly used dimensions. They are successfully used by all the major manufacturers and numerous end customers worldwide. Material:Molybdenum Material:Tungsten...

...Bars, wires, Molybdenum, Tungsten...

... nickel-chromium alloys such as 1.6959 - Nitrogen-alloyed duplex steel like X2CrNiMoN 22-5-3 (1.4462/ F51) - or super duplex steel like X2CrNiMoN 25-7-4 (1.4410/ F53) - Tungsten-molybdenum alloys like X10CrWMoVNb 9-2 (1.4901/ F92) - Titanium-stabilized chromium-nickel steels like 1. Die-forged parts: up to 130 kg raw part weight Maximum length: 600 mm All steel grades: heat-treated steels, nickel...

...tungsten, molybdenum, ceramic, silicon, nickel alloys, or titanium, as well as non-ferrous and precious metals with high precision. • Performance features we can offer you in cutting and drilling: • Tolerances and contour accuracies < 0.01 mm • Cut seam widths and hole diameters starting from 30 µm • Material thicknesses from 0.005 to 4 mm • Angled cuts and angled drilling up to 65° to the vertical plane • Minimal heat-affected zone...

...High-density tungsten alloys according to ASTM B-777 made of WNiFe and WNiCu, machinable. Used, for example, as weights or for radiation shielding. Rods or parts made to drawing. In contrast to pure tungsten, these high-density tungsten alloys made from tungsten with the alloying elements nickel, iron, copper, and molybdenum are easy to machine. Drilling, milling, or threading is possible. The higher the tungsten content, the higher the density but also the price. Their density ranges from 17 to 18.5 g/cm³, which is quite close to that of tungsten.

...Scrap and waste of heat-resistant steels alloyed with chromium, nickel, molybdenum, tungsten and vanadium. Chemical composition:Ni 0.4% – 2.6% Cr 10.5% – 15.5% W 0.7% – 2.2% Mo 0.3% - 0.7% Fe-based...

...High temperature furnace designs contain heating elements made of carbon, tungsten or molybdenum. When the operating temperature of the high temperature furnace is significantly higher than 1500°C, the elements are electrical insulated from the furnace sides using aluminum oxide ceramics. With the development of technology, more and more companies need high temperature electrical furnaces with...

...HPM® C 276 is a Nickel-Molybdenum-Chromium-Tungsten alloy with a high level of corrosion resistance. A low carbon content enables the alloy to resist intergranular corrosion at weld joints. These attributes make it an important alloy for the most severe chemical processing applications. such as use in metal diaphragms for aerospace sensors and burst discs. The alloy is readily formed from the...

...Alloy TZM Titanium, zirconium, molybdenum, excellent mechanical properties, suitable for hot working, high hardness, good thermal conductivity, low thermal expansion.

... produces deeper and more precise holes than single-pulse drilling. Percussion drilling enables hole diameters from 0.02 to 0.4 mm and drilling depths of up to 10mm. High-temperature resistant materials such as Hastelloy, tungsten, molybdenum, and all types of precious and non-ferrous metals are suitable for laser drilling. Ceramic materials such as sapphire, ruby, diamond, or aluminum oxide and related materials can also be drilled with a laser.

... injection molding), and HIP (hot isostatic pressing). Available components: Thermal protection tubes, heating conductors, heating inserts (hot zones), holders, furnace installation parts, charging carriers, frames, boats, fastening elements, shields, MOTEX® components, retorts Typical materials: Molybdenum, titanium-zirconium-molybdenum (TZM), molybdenum-lanthanum (ML), tungsten, tantalum, niobium, rhenium...

...Material: Tungsten, Molybdenum, Stainless Steel, Special Alloys Wire Diameter: 0.20 mm to 2.00 mm Execution: 2D and 3D freeform bent parts on CNC-controlled machines, also with contour embossing. With our own tool manufacturing, we can quickly produce special tools for various machining and profile wire contours.

...At our CNC multi-axis machining centers, we manufacture even the most complex workpieces. For decades, we have specialized in processing special materials. Here are some examples of special materials that we work with: - Titanium alloys - Nickel alloys - Pure silver - Molybdenum - Beryllium copper - Tantalum - Tungsten - Cobalt - Special plastics - FRP - Macor glass-ceramic...

...We offer you the following services in the field of thin film technology: • Manufacturing of sputter targets according to customer specifications (metals, alloys, semi-metals, non-metals, ceramics, conductive targets) • Bonding of sputter targets to substrates (copper, molybdenum, tungsten, and others) • Milling of shapes and drilling of holes in sputter targets • Coating with conductive and non-conductive layers, optical layers, DLC coatings • Powder metallurgy, alloying, pressing, sintering, cold and hot rolling, vacuum arc melting, induction and zone melting...

...Stainless steel, nickel silver, brass, bronze, copper, aluminum, etc. Additionally, special materials such as tungsten, titanium, molybdenum, etc.

... clamping system for easy post-processing at the highest accuracy level and inert gas atmosphere including gas purifying based on industry standards. The DMP systems are able to process non-reactive and reactive materials, e.g. stainless steel, molybdenum, tungsten, titanium, and gold. The Micro Laser Sintering technology has been developed and is continuously improved by 3D MicroPrint GmbH. Superior...

... 1600°C requires certain minimum strengths to be maintained or specific types of tests to be conducted, where only those materials can be used for the construction of heaters and load systems that would be destroyed by oxygen at high temperatures (graphite, molybdenum, tungsten). The technology that MAYTEC can propose is usually tailored to the specific customer request and is primarily based on already successfully designed partial solutions.

...Laser micro-sintering and micro-SLM for the generative manufacturing of micro-structured parts Materials: various metals and cermets, e.g. stainless steel 1.4404, 1.4301; molybdenum, tantalum; tungsten/aluminum, tungsten/copper; copper, silver, platinum; cermets: copper and molybdenum + Al2O3, stainless steel + SiC; minimum structure size approx. 15 µm; accuracy approx. 3 µm; untreated Ra = 2 µm, Rz = 17 µm; treated Ra = 0.25 µm, Rz = 2 µm...

...Alloys Containing Nickel, Cobalt, Tin, Molybdenum, Tungsten, Tantalum, Titanium, Silver, Gold Ferro and Noble Alloys Tungsten, Molybdenum, Vanadium, Titanium, Chromium, Niobium, Manganese, Ferrotitanium, Ferromolybdenum, Ferrozirconium, Ferrotungsten, Ferroniobium, Ferronickel, Ferrovanadium, Ferroboron, Ferrochromium, Cobaltboron, Nickelniobium, Nickeltantalum Superalloys the assortment...

...We buy stainless steel scrap of all grades, such as: 301, 303, 304, 316, 410, 431, 430F. We purchase metal waste containing nickel from 8% to 80%. We also acquire metal alloys with nickel, molybdenum, chromium, vanadium, cobalt, and tungsten. We buy both scrap pieces and shavings. We invite all interested parties to establish cooperation with us in the trade of stainless steel and high-nickel scrap to contact us via email or phone!

...Round and square bars made of pure or alloyed molybdenum manufactured to your specifications. Are you looking for molybdenum bars? A molybdenum bar can be customized in terms of its dimensions, tolerances, and alloy, and can be sourced from us. Purity: 99.95%, or alloyed Delivery forms: Round bar, square bar, plate, wire, sheet...

... protective gases such as nitrogen or argon, as well as reactive gases like hydrogen, acetylene, and ammonia. Operation in air is excluded. For hardening, the vacuum furnaces are equipped with a protective gas quenching system (up to 20 bar). Oil quenching in double-chamber systems is also possible. The heating consists of several graphite elements, and upon request, can also be made with molybdenum or tungsten heating elements.

... parts made from molybdenum, tantalum, tungsten, titanium, and their alloys (TZM, Alloys Invar, Alloys Kovar, Inconel). We supply you with finished parts according to drawings at attractive prices. Our own manufacturing facility produces according to your requirements, including individual parts or small quantities. We are also happy to assist you with design or suitable material selection. The...

... supplying the markets with secondary raw materials, we generate a competitive advantage for our customers and save thousands of tons of CO2 as an industry. We source and refine alloys based on iron, nickel, and cobalt, preparing them specifically for the material using state-of-the-art analytical equipment. Through our professional and certified quality assurance, we guarantee pure material quality for...

...residues, ore, turnings, powder, granules, ingots. We are working with small, local companies and big multinational corporations, from small quantities (1kg of Iridium) to 1000s MT of Al and etc. So do not be afraid to reach out! Do have some off grade material? Maybe some left over in your warehouse? Do you have some rare metal with no idea what to do with? Or maybe just simply lack the required...

For over 25 years, ANKURO has been supplying semi-finished products, products, and services related to high-performance materials, specifically the so-called refractory metals. We supply and process titanium and titanium alloys, tantalum, molybdenum, TZM, zirconium + zirconium alloys, tungsten, as well as nickel and cobalt and their alloys. We can also assist with other non-ferrous metals such as...

... our warehouse in Dinslaken. We manufacture according to national and international norms and standards, such as DIN, ISO, EN, NORSOK, ASTM, or AMS. Please contact us - we would be happy to create a suitable offer for you. Contract manufacturing: Titanium (semi-finished products, components, foil, round bar, wire, screws, nuts, Ti-AMS 4911, tantalum, zirconium, niobium, tungsten, molybdenum, copper, nickel, stainless steel, alloys, sintered alloys...

...Pipe Processing Ketterer – Cutting Grinding Test Center / Tool and Machine Engineering Cutting Grinding – Wet or Dry Cutting. We are certified according to ISO 9001. Series and prototype processing for Automotive, AERO technology, and other sectors. We are specialists in the processing of hard-to-machine materials. Stainless steel, nickel, titanium, molybdenum, tungsten, vanadium, tantalum...

we are specializes in the processing of refractory metal such as tungsten and molybdenum products.It’s a professional powder metallurgy and investment casting manufacturer which founded in 2009. It has 13years experiences in researching and manufacturing power metallurgy and investment casting products in copperand tungsten alloy, sliver tungsten alloy, tungsten copper,molybdenum copper etc. Our...

... Tantalum, Tungsten, W-Cu, Molybdenum, and Titanium. For medical technology, aerospace, chemical, and pharmaceutical industries. Sourcing in the USA and since 2001 in China. Full control through annual audits directly at the plants. Swisstech Basel, Medtec Europe Stuttgart, Oberflächen und Schichten Stuttgart, IDS Köln - trade fairs where you can feel free to approach us.