tube compression

...To ensure safe transport and enable an easy handover of the products during later industrial processes and assembly, we ship our springs and sub-assemblies in special packaging. Any conceivable special packaging is adapted precisely to the product in question, e.g. blister or polyethylene packaging. Tube packaging: Compression springs are transported in tube packaging. Tube packaging ensures that...

... the length and the rotation means very little involvement for the operator during the manufacturing of tubes. Accessories are available, like an integrated saw, a de-burring device, a flaring tool and a compression-fitting swaging tool. Tube diameter:20 - 76 mm Max. Wall thickness:2 mm (for tube-Ø 76 mm in Stainless steel) Usable length:3048mm (Standard), 6096mm (optional) Control:PLC with Touch Panel...

... adjustment valve in the threaded cap of the pressure tube. This valve allows for the reduction of the spring's push force. Gas springs of size 04/12 and 06/15 must be stored and mounted with the piston rod facing down. Models from size 08/19 can be stored and mounted in any position. The end-of-stroke damping only works when the piston rod is oriented downwards. Reference: 26200 Filling substances: oil, nitrogen...

... minute with its 90 servo axes. The Speedmax L currently has 20 processing stations and can produce up to 60 parts per minute. It processes tube and solid material up to a diameter of 12mm and a feed length of 50cm. Various bends in all planes and, in its current configuration, up to four compression processes are no problem. With a different configuration, the SPEEDMAX L can also emboss, notch, flatten, and punch.

...300 PSI  1 x compression tester  1 x rubber hose (45cm)  4 x spark plug adapter  1 x straight pressure tube (15cm)  1 x angled pressure tube (15cm) DIMENSIONS:30 x 22 x 11 cm WEIGHT:1.1 kg...

...Pre-assembled pump kit to pump foaming agents, low concentrated acids, low concentrated alkalis of 200 l drums (immersion length 1000 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor F 458, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools - Inner tube...

... via push buttons and a multi-segment screen. EGE flow sensors can be installed in circuits with corresponding pipe diameters, using threaded or compression fittings. They provide optimal measurement services wherever safe, robust, and low-maintenance monitoring of low flow rates is required.

... certified for use in zone 1 or 2 hazardous area, custom built to meet client specification. The gas pre heater consists of a process tube coil and an electrical heating bundle, casted in aluminium. The process gas flows through the tube coil and is heated by the aluminium block that provides the heat transfer. This indirect electric heating gives an accurate control of the process and eliminates pressure vessel design and associated costs.

...There are the following manufacturing processes: - Stamping - Water jet cutting - Cut from tube - Production using injection molding and compression methods Depending on the application, rubber-metal connections are also possible, where the elastomer material is vulcanized to a metallic carrier part.

...the check ball (compression) is pressed into its seat. As soon as the piston head moves, oil is pushed through the throttle hole(s) located in the shock absorber tube, generating the required damping force. After the oil has passed through the throttle hole, a portion of the oil flows through the extension check valve and fills the rod side end of the shock absorber tube. The remainder of the oil displaced by the piston rod compresses the compensating sponge. After the oil brake has extended, the check ball (extended) is pressed into its seat. As soon as...

...½’’NPT or mounting flange Design: insertion model Temperature range: -50…+200°C Material: 1.4404 / AISI 316L Diameter of immersion tube: 3, 6 or 8 mm Cable material: PVC, silicone or Teflon Protection class IP: IP54 Technology: resistance Mounting: flange Temperature range: -50…+200°C...

...Wire and tube bending, as well as compression in multiple planes, either single-sided or double-sided. Pipes seamless or welded. Up to a maximum length of 1,200 mm / thickness 8-15 mm (pipes) / thickness 2-16 mm (wire)...

...Brass Compression Fitting Female Material:Brass Seal:PUR Thread Type:BSPP Female Thread Working pressure:25 Bar Diameter:1/2'' to 4''...

...Compression rings for diving pipes, without insert. Size: Dimensions in mm: 7333 black 100 1 ¼" 30x37x4, 7334 black 100 1 ½" 38x44x4...

...This tube is equipped with compression fittings on both ends, making it suitable for hydraulic or pneumatic connections where a secure and reliable link is required. THE PRODUCTS PRESENTED HERE ARE DISPLAY SAMPLES AND ARE NOT AVAILABLE FOR ONLINE PURCHASE; EACH REQUEST MUST BE QUOTED WITH THE CLIENT'S DRAWING. WE PROVIDE BENDING, CUTTING, WELDING, AND CRIMPING SERVICES.

...Suitable for flow measurement in large pipes, for installations with low pressure dropAverage measurement over the entire length of the tube. Installation on the pipe: compression fitting, flange ISO PN 2.5 to 420 or ASME 150 # to 2500 #, retractable. Material: Standard: 304L / 316L stainless steel, others according to your application. Standards:ASME MFC-12M Fluid:liquid, gas, steam Diameter of...

...This compression-molded material is a PEEK polymer enhanced with carbon fiber, graphite, and PTFE, with each additive comprising 10% to improve sliding and wear properties. Chemical designation: PEEK (Polyetheretherketone) Color: black Density: 1.47 g/cm³ Machinability: good machinability Flame: inherently flame-retardant Sliding: good sliding properties Good deflection temperature: resistant to hydrolysis and superheated steam...

...The Dexnyl PEEK tubes can be an intelligent solution for round and hollow pieces. They are mostly extruded or compression molded. But BIEGLO GmbH offers also injection molded PEEK tubes and spin casting PEEK tubes in long and short length and special thin wall tubes. Parts made-up of our PEEK offer excellent hydrolysis and electrical insulation. PEEK is the ideal replacement for metal and other...

... - Weight: 240 kg - Suction and discharge connection: 50 mâcon - Mobile brake - Mushroom stop - Remote control USAGE Suitable for the gentle and light transport of whole or destemmed grapes, pomace, lees, and loaded liquids. Pumping achieved through simple compression of the flexible tube, with no mechanical parts in contact with the product.

... influences as much as possible. Exact diameters/material thicknesses and a precise fit allow for optimal processing and maximum safety. The connection with the conductors/cables is made using a so-called WM crimping method. This crimping form enables, especially with conductors that have a large number of wires, an intensive compression even towards the center of the conductor. The number of crimpings required depends on the crimp width of the tool or the cross-section/sleeve length of the cable connector.

...Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications...

... contamination: loose forms are lifted off with MINI VACUUM, grimy forms are first dissolved and than dry polished. MINI VACUUM: Safe process due to contact- and residue-free application No compression and transportation of dirt particles No direct gas contact High performance suction action guarantees gentle lifting off of the loose particles, even when confronted with the resistance of the static charging inside the camera Economical: In fact the main percentage of contamination is loose and can therefore be removed with the MINI Vacuum HI TECH pressurized gas is especially strong, stable and..

...none (not designed for use with a thermowell) Insert / probe: no interchangeable insert Outer diameter protection tube: 6.0 mm (0.24"), 8.0 mm (0.31") Max. immersion length on request: up to 400.00 mm (15.75") Material protection tube/thermowell: 316L Process connection: compression fitting; tri-clamp; micro-clamp; clamp connections according to ISO2852 Tip shape: straight; reduced...

... thermometers are extremely robust, pressure-resistant, mechanically stable, and vibration-proof. Due to their small diameter, these thermometers have very short response times and are suitable for hard-to-reach, angled locations and narrow openings. They monitor thermal conditions in gaseous and liquid media, in containers, pipelines, devices, and machines, as well as in drive elements and braking systems. Installation can be done optionally via threads sized M10x1 to G1" or using a compression fitting.

... Separators -Heat Exchangers (Shell and Tube) -Mud Tanks -Conditioning Skids (Fuel Gas Supply Systems) -Injection Units -Natural Gas Compression Packages -Stacks -Pressure Piping -Nitrogen Gas System -Columns EMA and its associates have both completed projects with varying complexities; from plant engineering to individual discipline engineering, small and large project scopes, and different engineering cost basis. The team provides technical capabilities for FEED, detailed engineering, plant modelling, project management, engineering studies, and construction services.

... withstand extremely corrosive process conditions. It is offered with a wide range of process connections: flanges, threads, welding connections, or compression fittings. Max. process pressure (static): depending on configuration up to 100 bar Standard immersion length max: 4,500 mm (177") Immersion length on request: 4,500 mm (177")...

...The SHRMe, DRV 3-tube all Inverter energy recovery system of the latest generation, is the simultaneous heating and cooling solution for commercial buildings. Commercial Documentation French Installation Manual French User Manual French Design Manual English Service Manual English Toshiba DC Twin-Rotary compressors (high compression volume) combined with ultra-precise Inverter control...

...Our solenoid valves are a robust and well-known standard technology. The armature moves vertically up and down in an armature guide tube (armature stroke). Due to the defined spring force of a compression spring, the armature is pressed into either the NC position (Normally Closed – closed valve seat) or the NO position (Normally Open – open valve seat) when there is no power. This principle can...

... indicators available. Design available with 1x Pt100, 2x Pt100 or 3x Pt100 measuring elements. Approvals: BV, DNV-GL, LR Measuring principle:Pt100 Measuring range:-25 … 120 °C Protection class:IP65 Material:Sensor tube: stainless steel Connection:Fixed connection cable Immersion depth:50 mm, 80 mm, 100 mm, 150 mm, 180 mm Accuracy/tolerance class:DIN EN 60571: class B (other on request) Approvals:BV, DNV-GL, LR...

...Durable elasticity with low compression deformation. Extremely weather-resistant from approximately -60° to plus 200° Celsius. They are particularly suitable for retrofitting old wooden windows and doors. Wood expands and contracts due to aging and weather conditions. Therefore, old windows and doors without window seals are naturally leaky. Silicone tube seals are exceptionally well-suited for retrofitting due to their very high flexibility. The tube diameter varies from 3 to 15 mm, allowing for effective sealing of even heavily warped elements.