thermoplastic office

...Our design office develops parts according to the specific requirements of the client. We support you in the project development from the very beginning. Our molds and tools are manufactured by experienced suppliers in Spain and Portugal, which allows us to adhere to the highest quality standards and continuously monitor the manufacturing process.

...Based on detailed studies provided by its client or conducted by its design office, CTRA supplies high-performance piping systems in GRP and Thermoplastic GRP with a diameter range of 25 to 1500mm. CTRA produces pipes and a full range of fittings in GRP and Thermoplastic GRP in compliance with the standards and regulations in the geographical areas of the projects to be carried out. The wide...

DPJ Workspace specializes in furniture and interior design services for offices and public spaces. With us you will find office furniture and interior design of the highest quality. We can therefore promise a minimum 10-year warranty on all our products. In our wide range, you will find everything from office chairs and height-adjustable desks, to ceiling lights and designed furniture. Our entire ...

... demands of manufacturers of store fixtures, medical devices, display stands, office, and household furniture. The numerous mounting options allow for flexible attachment to a wide variety of devices. Thermoplastic (TPE) has a higher load capacity than solid rubber. Due to the floor-friendly gray tread, thermoplastic offers high driving comfort without leaving marks. With longer standing times on...

...The Spoon Chair by Kartell is a monocoque office chair on wheels, resulting from a decidedly avant-garde production technique. The technology used for this chair, an innovative injection molding technique of two components, allows for a "layered" product. It involves the simultaneous molding of two different thermoplastic materials: one material serves purely an aesthetic function (exterior) and...

... rigidity, heat resistance, and good sliding properties. It is perfect for parts used in humid or wet environments. POM-C is more resistant to hot water than POM-H (homopolymer). POM is used in the following industries: agriculture, medical technology, textiles, mechanical engineering, IT and electronics, transportation and logistics, bottling, bottle and car washing facilities, sports equipment, office machines.

... absolute elegance, designed for the garden, but not only. Vasar products also adapt perfectly to indoor environments and even to your home or office desk. The Vasar pots and planters made from thermoplastic materials have the advantage of being extremely lightweight and easy to handle: they can be easily moved, making them ideal for taking care of plants that, depending on the seasons, need to change position for greater or lesser exposure to the sun or the elements.

...The type H fire-resistant seal is sold in a length of 2040 mm to equip fire doors. In addition to the type H fire-resistant seal, an intumescent seal made of hydrated sodium silicate, encased in a rigid thermoplastic sheath and combined with a cold sealing strip measuring 25 mm x 4 mm, must be installed at the door edge. Usage: fire doors for ERP high schools, colleges, nursing homes, EHPAD, hospitals, etc., fire doors for IGH W2, W1, GHU, fire doors for ERT office buildings, warehouses, storage...

...3D Printer Material ABSplus, neutral, colored, soluble support material with WaveWash We offer online financing for Stratasys 3D printers. For example, the Stratasys Mojo The Mojo is a single-color 3D printer with a build volume of up to 127 × 127 × 127 mm. The building material used is P430 thermoplastic ABSplus (Acrylonitrile-Butadiene-Styrene). It is offered in a bundle with a WaveWash washing station for removing the support material. Financing options: leasing, rent-to-own, and full-service leasing.

... about producing plastic caps and various types of protections for numerous applications, but also creates special items based on specific needs or according to customer designs. For any requests that fall outside the visible catalog production, please do not hesitate to contact our sales office.

...), up to press testing and maintenance. NOCENTE S.A can also offer various hybrid manufacturing solutions through outsourced partners in Asia and Europe, with mold design and development fully carried out within our design office and workshop in France. Always seeking innovative solutions for your thermoplastic injection or compression projects, we would be delighted to discuss how NOCENTE S.A can meet your specific needs.

... products in the highest quality and at competitive prices, as well as services that absolutely meet our customers' expectations. For the production of plastic parts, we only use high-quality, safe, and certified thermoplastic plastics, which we source from reputable suppliers.

... solutions - technical assistance for your developments Our range is vast and varied: cylinder liners, rollers, machining of hard materials and assembly with various metals, ceramic or sapphire or tungsten carbide parts, sintered parts, MIM, medical tubes, aluminum injection, micro-injection of thermoplastic parts, bi and tri injection, deep drawing, stamping of large parts, magnets, watchmaking turning, lost wax casting, cold forging, springs, precision springs, catheter guides, keyboards, connectors for LCD,... Our experienced sales engineers respond to your tenders promptly.

...totaling 3500 square meters covered and 3000 square meters uncovered, where the Thermoplastic Division, the Mechanical Workshop, and the Technical Office are located. We at Tecnometalsystem are determined to achieve the position of the best company in the accessories for window frames sector in Europe. We consistently earn the recognition and trust of our customers thanks to our foresight, our ability to learn, and our role as architects of our future.

... timeframes for work to be carried out on a fixed-price or controlled expenditure basis. Next, technical expertise is a strong point of SERTIP. The company has a workshop and on-site facilities that are structured and equipped to meet the demands of its clients, both in terms of technical feasibility studies and quotes as well as execution. The quoting office is also a strong point of the company...

Dohrn Trading GmbH – Your Plastic Partner is a reliable trading company for thermoplastic secondary materials. Since our founding in 1992, our partners have included industries processing plastics such as automotive, civil and structural engineering, horticulture, household goods, computers, office and school supplies, furniture, technical devices, etc. – the areas of application are as diverse...

...Since 1993, Plastec has been a very dynamic company and the partner of choice for your specific needs in thermoplastic profiles: rigid PVC, co-extruded PVC, ABS, HDPE, LDPE, HIPS. To serve you: 14 high-performance extrusion lines. A design office. A range of standard profiles. Do not hesitate to contact us for your PROFILE. Custom articles, that’s our specialty. These "custom products" are...

Plastic components. Thermoplastic injection. Molding and overmolding. Design office. Industrialization. Main customer sectors: Automotive - Electricity - Safety devices - Medical devices - Cosmetics and POS. Non-exhaustive list. - Low-cost tooling solution. Development of special machines. - Assembly of components. Marking (pad printing). Automated injection molding machine park, from 35 to 550...

... withstand a wide temperature range (from -50°C to +150°C depending on the blends) as well as oxygen, ozone, UV rays, fuels and oils, certain solvents, and are impermeable to gases. TPUs are recyclable, can be colored, and are perfectly suited for bi-material injection (especially with PA). With a team of 50 people and a design office, AURAY PLAST operates a fleet of 24 injection molding machines and...

Vacuum thermoforming of thermoplastic materials. Digital cutting. Application of hot melt adhesive seals. Manufacturer of industrial plastic parts through thermoforming. Production of technical and aesthetic parts: integrated design office. Manufacturer of cover parts, body parts, components for medical, industrial, electronic sectors, ... Would you like to know more? Contact us for a physical meeting at your company or a factory visit to present our organization and production capabilities.

... in 1951 and envisioned that this new material would replace metals as sliding bearing materials in many applications. In 1955, Zell-Metall GmbH introduced a new product line: Technical Plastics. Initially, rods and sheets made of polyamide were extruded, but shortly thereafter, machined plastic and injection-molded parts were also produced. Zell-Metall GmbH was one of the first European producers of extruded and injection-molded polyamides and acetals. In 1957, Zellmetall Vertriebs GmbH was established as a sales office and warehouse for Austria in Vienna and has since continuously developed.

... thermoplastic components, as well as in overmolding a wide range of polymers. PLASTECH has a subsidiary in Morocco located on 1200 m2 and equipped with a fleet of 12 presses ranging from 30 to 90 tons. We apply our services to the following sectors: automotive, gas fittings, office furniture, electricity, battery accumulators, and perfume bottling. Quality: production under SPC (Statistical Process Control).

... parts. CSB Bearing France offers a complete range of self-lubricating plain bearings; in metal, bimetallic, metal-polymer, molded thermoplastic, and filament-wound. CSB Bearing France ensures product and management quality validated by its TUV certifications ISO9001, ISO/TS16949, and ISO14001, while maintaining a very competitive cost.

... blends, designs parts, creates molding tools, and manufactures all kinds of parts according to specifications, particularly rubber-metal bonded assemblies. Its subsidiaries PERROT and IXEMER complement its service offerings with thermosetting and thermoplastic elastomer components (PERROT specializes in the production of small precision and aesthetic parts, with or without inserts, while IXEMER designs and injects multi-injection plastic subassemblies.

... rollers for handling; industry constitutes a large part of our activity. Today, SMF has opened new doors to high performance and works for defense, aeronautics, and aerospace by manufacturing very specific inserts and connectors. Finally, to satisfy our need for continuous monitoring, SMF leverages its expertise in plastics by making its design office available to startups to develop and produce cutting-edge prototypes and series production of the latest products.

... MIP Plastic also offers manual and automatic assembly, pad printing, packaging, and storage of your plastic parts. Thanks to its design office and its industrialization and mold expertise service, MIP accompanies you throughout the project in material selection, product design, while meeting the product specifications. Furthermore, our quality service ensures regulatory monitoring as well as microbiological analysis, metrological controls, and qualifications QI, QO, QP.

In the construction of molds, we have gained significant experience as project managers, especially when, due to time constraints or other reasons, the molds must be produced in multiple external workshops. Our workshop is equipped with a technical office for both two-dimensional and three-dimensional design. Most of the machining is carried out using CAM with 3 machining centers, 1 CNC lathe...

As an independent design office, we offer CAD services and Moldflow analyses for thermoplastic injection molding, in the fields of household and electrical appliances.

...Picmec has been producing since 1965 the following products: - steel ball bearings and/or with thermoplastic material coatings - telescopic and simple guides for drawers In general, our products are used in many industrial sectors, particularly in office equipment and furniture, home furniture, the electronics sector, and countless other applications. In the field of application techniques, we...

...Gottwald has over 40 years of experience in the field of plastic injection molding. We process all thermoplastic materials with a part weight of up to approximately 2.4 kg. Our machinery has a clamping force of up to 660 tons. We collaborate very successfully with the automotive and toy industries, but we are also very active in the fitness, tools, office supplies, household goods, and advertising sectors. Flexible contract manufacturing in a 3-shift operation / possible part weight up to 2.4 kg...