surface treatments Switzerland

...Surface Treatment of Metals, Our product range includes powerful pre-treatment solutions such as: the mild alkaline immersion degreaser Clean 600, which offers outstanding cleaning performance. Surface Treatment of Metals, The foundation for an exceptional coating process lies in a flawless workpiece surface. Our specially tailored pre-treatments ensure this. Mechanical pre-treatments such as...

... uniformity of temperature. In salt bath heat treatment, heat is not transferred through radiation and convection as in atmospheric processes (gas and vacuum), but rather through conduction via the contact of the molten medium with the surface of the component. This allows heat to be supplied to or removed from the workpiece very quickly. The heat treatment in salt melts is carried out swiftly and, due to the uniform heat transfer, results in minimal distortion.

...By applying surface treatments on outer ring contact surfaces, it is possible to improve certain mechanical characteristics such as the hardness. By doing this, we can increase wear resistance while decreasing the friction coefficient. With certain treatments it is possible to achieve high resistance to specific chemical agents. The table below shows a small sample of examples of such surface treatments and their resulting technical characteristics.

...At WKK Kaltbrunn AG, the manufacturing process is not yet complete with the production of stamped parts or the assembly of components. Subsequent surface and heat treatments complete our range of offerings. To ensure that you can directly use, install, and further process the parts we supply, we prepare our products for you through aqueous cleaning, ultrasonic cleaning, and tumbling. Degreasing and deburring of the parts are part of our service. On the other hand, our partners enhance your parts through galvanizing, chromating, silver plating, and painting.

...The design and manufacturing of stamping and bending tools is another core competency of RETERO. With over 33 years of experience in the construction and production of stamping and bending tools, as well as their products, we have a consistently satisfied customer base. Prototyping Small series of 5,000 – 10,000 pieces. Surface treatments through vibratory finishing and micro-blasting. Surface treatments: Vibratory finishing, micro-blasting.

...For some of your product solutions, fasteners represent a particularly important part of your product and influence its functionality, design, durability, and customer satisfaction. We support you in the development and manufacturing of cost-effective custom solutions tailored to your needs. Our offerings include flow-formed parts, turned parts, milled parts, stamped parts, and bent parts, as well as special surface treatments or coatings – contact us today for a customized quote.

...The production of blanks, stamp bodies, inserts, clamping devices, etc. from metals through milling, turning, grinding, and drilling is carried out in-house. Similarly, heat treatments of these parts up to 950° C are also performed in-house. If we cannot carry out a process in-house (e.g., surface coatings, wire erosion), we collaborate with long-standing and competent partners.

...Powder coating allows for efficient and cost-effective surface treatments. Our machine with 10 nozzles enables rational and economical painting. Attached manual workstations allow for manual touch-ups in areas that are difficult for the machine to access, especially for more complex parts. These two options enable us to cater to product-specific and customer-specific needs.

... enables the following treatments to be performed in a single session, with no social downtime and no contraindications. A new non-invasive aesthetic and anti-aging approach that treats the skin both on the surface and in depth. Training is included with the purchase of the device.

...Nozzle needles for hot runner systems, closure needles, and special needles are manufactured by HiTeCH precisely according to customer specifications. Available upon request in tight tolerances, including coating. Guide bushings: If needed, we can supply you with precisely honed guide bushings. Surface treatments: Available with various coatings. Product advantages: small quantities available at competitive prices short delivery times guide bushing and needle from a single source...

...Sandblasting is an optimal surface pre-treatment and provides the best conditions for subsequent treatments of aluminum. The abrasive medium (corundum) strikes the metal surface at high speed, cleaning and roughening the surface. These prepared surfaces are ideal for the subsequent anodization. Additionally, the blasting of the surface imparts a special appearance.

...CNC milling in aluminum is our specialty! With our modern and automated machinery, we manufacture CNC-milled parts from aluminum in any shape and size. We are your partner from prototypes to market-ready series. Our customers receive a ready-to-install product, including the desired surface treatments.

...• Textile industry • Food industry • Plastics industry Operating frequency: 70 kHz / 40 kHz / 35 kHz / 30 kHz / 20 kHz Materials: Aluminum alloys; Titanium alloys; High-alloy tool steels; Various surface treatments...

... drawings, a simple h6 guide shaft, or other special tolerances. SFERAX shafts can be used in a variety of applications that are not necessarily related to bearings, such as guide columns, piston rods, rings, etc. One of our strengths also lies in the available heat treatments. Whether you need surface-hardened, through-hardened, case-hardened, nitrided, Tenifer nitriding, or another surface treatment, we offer you a wide range of products.

...As a full-service provider, we manufacture all parts in the turning and milling sector in plastic, aluminum, and steel, from individual pieces to medium and larger series. We also offer services such as welding, bending, as well as surface and heat treatments in close collaboration with our local partners.

... turned parts have a diameter of 0.5 mm and go up to 64 mm. We also manufacture CNC turned parts with larger diameters on special machines. Additional processes such as surface treatments, polishing, grinding, lapping, honing, thermal post-treatments, and laser engravings complete our offerings.

... installation be realized. A wide range of technical tools and methods is utilized for this purpose. In all aluminum wrought alloys according to standard DIN EN 586-2 EN AW- 2014 EN AW- 2024 EN AW- 5083 EN AW- 5754 EN AW- 6082 EN AW- 7075 To achieve increased strengths, tightness, anodizable surfaces from 10 g to approximately 30 kg piece weight Machining and surface treatment possible Specialties: Component analysis and development, material flow simulation, and tool analysis...

...5-axis simultaneous turning and milling of plastics to titanium, precisely manufactured, documented with 3D CMM and optical measuring machines. We have always been active in contract manufacturing, primarily in the European market. Our focus is on engineering, turning, and milling of high-quality prototypes as well as series production. We offer our workpieces in close collaboration with partner companies in various surface treatments.

... The offer is a comprehensive package for you. From design assistance for optimized and cost-reducing products to processing and delivery: Production of turned-milled parts (from small series up to about 20,000 pieces) - Design assistance for cost-reducing products - Part cleaning - Vibratory finishing - Assembly of small series - Quality assurance/measuring/testing - Delivery - Laser marking Surface treatments such as hardening, etc. (external partners).

... clientele. Whether it’s prototypes, individual parts, or series production, we offer an attractive machine park to meet your demands. Even challenging materials pose no problem in terms of procurement or processing. Through close collaboration with partner companies, we can also offer our customers a variety of additional services. Surface treatments and heat treatments are processes we can provide in addition to our machining services. Welding components and assembly of modules complete the comprehensive solution for our customers. Benefit from our many years of experience.

...including surface treatments by other specialized companies. All parts we manufacture are cleaned by our Hobart washing system (grease-free). We can guarantee the quality of our work through the combination of many years of experience and modern technology. We look forward to hearing from you for information regarding our services or a non-binding quote for the production of CNC milled or turned parts. We are at your disposal at any time. Our company in Gebenstorf is easily accessible, and we offer prompt delivery and pickup.

... networks CNC milling CNC turning Heat treatments Surface technologies Consulting: Consulting and solution finding We are happy to advise you in the areas of construction, process technologies, and production optimization, providing the corresponding manufacturing capacities. Quality and adherence to deadlines are self-evident. Machine park: For the production of complete components or individual grinding operations, we currently have 20 machine tools from various areas at our disposal.

Are you looking to outsource welding? We provide the quality you are seeking! Let us convince you. We have experience in the fields of plant and pipeline construction, pharmaceuticals, chemicals, food industry, dairies, cheese production... We collaborate with reliable partner companies for mechanical processing of individual orders, small series, surface treatments, as well as for prototype construction.

Welcome to RERO AG We are one of the leading and largest metal finishing companies in Switzerland. As a traditional company with over 130 years of experience, we offer you a wide range of surface treatments including galvanizing, anodizing, and electropolishing. Additional services such as transportation and technical consulting enhance our offerings.

... and reliability. Improving processes for flawless service is at the core of our thinking. This guarantees you the best possible quality and unbeatable punctuality. Our constant pursuit of improvements gives you a decisive advantage. Strengths • Pre-treatments • Short delivery times and attractive prices thanks to state-of-the-art coating systems • High flexibility • Small parts up to 2000 pieces per day • Own pick-up and delivery service if needed • All common RAL and NCS colors in stock...

... technology and lighting control for private homes, industry, production, and advertising technology. This creates custom lighting solutions for architects and planners. All packaged in our cast aluminum housings. With our modular and flat LED monitors and panels, we can meet every requirement, both indoors and outdoors. Aluminum parts with various surface treatments Plastic and silicone - injection molding process Electronics and control development LED modules with Japanese LED chip Flexible LED strips with Japanese LED chip LED screens with up to 4K resolution...

We, Rheintal Härtetechnik AG, are a young dynamic service provider in the field of heat treatment and surface finishing. In the area of vacuum technology, we offer vacuum hardening, annealing treatments in vacuum, as well as vacuum brazing. You will find both protective gas heat treatments, such as case hardening, tempering, carbonitriding, and hardening in protective gas with nitrogen, as well...

The specialists for abrasive and blasting materials Proven water jet cutting in both macro and micro areas with abrasives relies on high-quality additives. Surface cleaning and treatments are also inconceivable without abrasive materials. We are specialists in a wide range of mineral and metallic blasting and abrasive materials. In addition, we are also specialized in the proper disposal of cutting agents, technical support, and the recycling of abrasive cutting materials.

...Reliable subcontractors are available for heat treatments and galvanizing, coating, and powder surfaces, etc. Assembly: We manufacture assemblies. Laser Cutting: Using various machines, we produce laser parts. We have our own facilities for countersinks, threads, embossing, grinding work, and surface grinding on components. Reliable subcontractors are available for heat treatments and galvanizing, coating, and powder surfaces, etc. Welding: Using various machines, we produce welded constructions.

... machining, etc. Milling 5-axis milling on machining centers. Prototypes, complex parts. Finishing Hardening, polishing, surface treatments. Assembly Assembly of parts into sub-assemblies. Engraving Laser engraving with our machine directly on-site. Capabilities Single-spindle More than 40 CNC single-spindle machines (fixed and movable spindles, passage diameter 1 to 65 mm, up to 200 mm in chuck...