...process visualization by means of trend charts, operator-definable operating limits, data acquisition, and synchronization of the dosing rate with the extruder output. Implementation in the extruder control system via fieldbus system is also possible.
•,Mass flow from 1 g/h up to 20'000 g/h
•,Dosing pressure up to 680 bar...
...System springs from STEINEL are available in various diameters and lengths, with up to eight different load types.
All springs are made from alloyed valve spring steel (Cr-V/Cr-Si), making them particularly suitable for impact and oscillation loads, and they can be used at temperatures up to 180°C. The high-quality material allows for system springs like the BLACK SZ 8047, which can deliver 2,000 daN over the maximum working stroke. The BLACK SZ 8049 even delivers 2,500 daN, making it stronger than some gas pressure springs.
Our high-quality pneumatic and electric handling modules and axes are primarily used in assembly machines. The DOMINO products originated from the company Landis & Gyr and have been successfully in use in assembly machines since 1996 under this product name, in the thousands. In 2010, this area was taken over by Komax AG and has since been independently continued by domino modul AG.
The domino mo...
...This allows the system to be sealed very effectively with a radial shaft seal over the spindle shaft.
Spindle nominal diameter: from 10 mm to 60 mm
Lead: from 1 mm to 30 mm
Dynamic load ratings: up to Cdyn 300 kN
Static load ratings: up to Cstat 650 kN...
...Direct-acting presses
- Knee lever presses
- Pneumatic presses with process monitoring
- Forces up to 60 kN
- Type-tested manual workstations
- Components for integration into special machines
The SCHMIDT® PneumaticPress, powered by compressed air, is a modular system that optimally meets the requirements in the fields of forming, joining, and assembly with a pressing force range of 1.6 - 60...
... characteristics of the system, several types of resins are possible.
Providing our customers with customized and tailored valves is the company philosophy of Sena Plastics. Please do not hesitate to contact us for further details.
Accessories and Options:
For all types of valves, several options are available, such as:
- Pneumatic or electric drive
- Positioner or limit switch box
- Inductive sensors
- Control box and pilot control
- And many more...
... pressure regulators.
It employs a fully digital control system to ensure high control stability and rapid response time, while its digitally characterized pressure sensor provides the quality, stability, wider range, and precision associated with this latest generation of piezoresistive pressure technologies.
... one of the sorting bins is full.
System requirements for the control PC:
Operating system Windows XP, 7 or 8
.NET Framework 4.5 or higher
2 RS232 or USB Ports
Dimensions / weight
W x D x H: 390 x 470 x 460mm, 25kg
Media
Power supply: 230 V, 50 Hz or 120 V, 60 Hz. Other voltages / frequencies on request
Pressurised air: dry and clean air, 0.6 MPa (6 bar)
elmor Green Design
Our label for:
high energy efficiency
longevity
no standby power loss
most components may be recycled
production without solvents, ROHS conformity...
... workstation RNC 281 for linear transfer
▪ Travel Path: X400, Y=400 mm
▪ Pneumatic pressure generation
▪ Workstation with safety enclosure
▪ Process control and HPP-25 control system
▪ 63 riveting programs storable
▪ 6 control variables / 45 riveting modes
▪ Integrated logging function, all data is recorded
▪ Ethernet and USB interface
▪ 5.7" touch screen LED backlit
Technical changes reserved.
...
No daily re-adjustment required
Faster start-up after interruptions. Thereby less waste during the start-up process.
No compressed air supply required.
Contamination-free gases thanks to diaphragm technology.
The Nova Swiss gas injection unit does not require compressed air, as it is the case with pneumatic amplifiers.
The integrated lubrication unit allows the system to be operated at very low speed, which in turn enables the dimensioning of extremely small quantities.
...100% electric – no hydraulic or pneumaticsystem, DIN sweepings container with a capacity of 2 m³, clean water tank for dust control with a capacity of 400 l, high discharge at the rear up to 1600 mm, operating autonomy 8–10h
Manufacturer: Tenax International
Type: Street cleaning machine
Model: Electra 2.0 evos
Drive type: Lithium-ion
Year of manufacture: 2023
Sweeping width: 2,270 mm
Battery: 48 V 1000 Ah
Drive: 100% electric...
...The performance of most Delta robot applications is limited by the handling of the product. An optimized pneumaticsystem is key for allowing maximizing the system performance. VELTRU is offering a range of rotary feed throughs and is happy to adapt to project specific needs, if necessary. The range covers systems with external vacuum generation from low volume and high vacuum level to systems...
...HANSA-FLEX supports customers from the construction industry to the food industry with a wide range of industrial hoses of certified quality.
With the inclusion of industrial hoses in the product range, HANSA-FLEX's system partnership has reached a new dimension. The company is now able to supply all connection elements for fluid technology from a single source. This brings clear advantages for customers: unified responsibility, no interfaces, greater budget security, and optimal availability.
...The AirLINE system provides a universal interface between process and plant control. It integrates electrical and pneumatic components into a single unit, allowing for...
...With the tire storage system, you can bring order and save up to 75% space in your tire storage.
Fewer and fewer people are just changing tires; instead, entire wheel sets are being swapped. The wheels are stored at the tire dealer or garage.
For the dealer or garage, this has the advantage of customer retention. Expired tires can be replaced throughout the year.
With our new tire storage system, which can be expanded as needed and adapted to existing spaces, you have the optimal storage solution for your customers' wheels.
...The Smart Line includes cost-effective pad printing machines for manual use. A handy machine for both large and small series in advertising printing and industry.
Smart Line
The Smart Line includes cost-effective pad printing machines for manual use. A handy machine for both large and small series in advertising printing and industry.
Features:
Open or closed ink supply system
Pad cleaning
Pneumatic two- or three-color pad shifting
Pneumatic rotating device
Digital interface...
... currently 7 distribution partners worldwide, we also ensure that we are close to the market, know the various customer needs, and incorporate these into product developments.
Our products:
Regulating valves for pipelines; pinch valves; shut-off valves; pneumatic control valves; pneumatic valves and controls; compressed air maintenance units; pneumatic valves; fittings for the chemical industry; special fittings; hose valves.
Perfect handling technology for the automation industry requires thoughtful engineering. Technology from Afag. Whether pneumatic or electric – our handling modules tackle every task precisely, quickly, and reliably, no matter how complex. As the only manufacturer in the world, we offer a 100% modular system of handling modules for the rapid selection of optimal combinations.
Technical expertise...
... employs more than 1,000 people worldwide and is one of the global providers of presses and components for the sheet metal processing industry.
It all started with the introduction of powerful drives for production machines - our proven pneumatic-hydraulic drive system TOX®-Kraftpaket. The alternative high-tech solution is our TOX®-ElectricDrive program. A variety of sheet metal joining processes...
... from various industries appreciate our extensive expertise in valve, pressure, and temperature measurement technology. From machine and plant engineering to laboratory and medical technology, our components and custom solutions are in use. In the assemblies, you will receive not only system solutions for the specific requirements of medical and laboratory technology but also special valves as well as apparatus-specific systems, control blocks, and panels. Special components such as process valves according to ATEX guidelines complete our offering.
... represent the most respected product programs in drive and fluid technology. We continuously expand this portfolio by developing innovative products and system solutions.
This enables us to help our customers tackle even the greatest technical challenges—reliably, safely, and efficiently.
... casting have been produced to complement the clamping systems. Since mid-2013, the clamping technology products have been developed and produced by the independent Triag International AG. Sales and technical consulting in Switzerland continue to be handled by Triag AG. The product range is being expanded around CNC machines according to customer needs. A proven zero-point palletizing system and a workpiece changer ensure a more efficient production process.