calibration Switzerland

...The ASCO CO2 Dew Point Tester reliably indicates the dew point (moisture content) of your CO2. This equipment makes it easy to measure the dew point of liquid and gaseous CO2. A laminated, illustrated stepbystep short instruction sheet in A3 format and a detailed instruction manual are supplied with each tester. The ASCO CO2 Dew Point Tester (stainless steel) can be used either wallmounted or freestanding. easy handling no calibration required ready for immediate use for gaseous and liquid CO2...

... from 0.1 N·m to 5000 N·m, as well as a motorized calibration bench covering a range from 1,000 N·m to 50,000 N·m. The measurement uncertainties of the calibration benches reach up to 0.01% of the measured torque value. The laboratory has been designed and constructed to meet metrological requirements, eliminating ground vibrations and temperature fluctuations that may interfere with measurements. Torque Calibration: 100 mN·m to 50,000 N·m...

...ROTH + CO. AG has been operating the calibration facility for temperature/thermal measurements SCS 0090 according to ISO/IEC 17025 since 1999. Our manufacturer-independent laboratory carries out calibrations in the range of -196 °C to +1350 °C using various measurement methods. Additionally, in 2011, ROTH + CO. AG was appointed by the Federal Institute of Metrology METAS as the Designated...

CLA - CLINICAL LABOTORY AUTOMATION SA, a company based in Switzerland, offers high-tech automation solutions and measuring devices for medical analysis laboratories, microtechnology, and the watch industry. We develop innovative and high-performance solutions based on groundbreaking technologies. We have extensive expertise in automating processes in the watch, medical, and microtechnology sector...

... range can be shifted up or downwards to reach a high accuracy of between -5 °C to +35 °C for example. The characteristics of the TSic 506F/503F/501F sensors at a glance: — Fully calibrated — Custom calibration and assembly available — Outstanding accuracy of ±0.1 K — Available with digital, analog and ratiometric output signal — Very low power consumption — Calibrated accuracy range of 40 K can be shifted (default: +5 °C to +45 °C)...

...Respiratory protection system with integrated air flow sensor and 3 level air flow adjustment. With the new PAPR system e3000X optrel guarantees: — Highest level protection (TH3) from smoke, aerosols and dust). The breathing air gets up to 500 times cleaner — Evenly distributed air inside the PAPR helmet without eye irritation — Automatic air flow control — Automatic air flow calibration — Additional cooling effect for the fore head Better work conditions for more efficiency, comfort and performance. Protection Class:TH3 (EN 12941) Weight:1.560g (incl. filter, belt and battery)...

... and temperature profile and is supplied with a detailed calibration sheet. Pressure Ranges:0…200 to 0…1000 bar Long Term Stability:±0,25 %FS Dimensions:⌀ 19 mm x 15 mm Temperature Range:-20…100 °C Material:Steel 1.4435...

... Calibration: Our buffer solutions are precisely calibrated to ensure accurate pH control. They serve as reference points for calibrating your pH electrodes, ensuring reliable measurement results. Variety of Formulations: Our range includes buffer solutions in various pH values, including pH 4.01, pH 7.00, and redox buffer solution. This variety allows for comprehensive calibration and adaptation to the requirements of diverse applications.

...The extensive experience of our employees, combined with a comprehensive range of machinery, makes us a leading partner in measurement technology and calibration.

...Calibration weights with perfect design for testing and calibrating scales Test weights and accessories for tests ranging from 50 µg to 5000 kg. Learn about calibration weights for optimal calibrations!

...The multiple award-winning intelligent thermometer with integrated HART® transmitter and Heartbeat Technology features the world's first RTD sensor capable of fully automated in-situ self-calibration. The device virtually eliminates the risk of undetected non-conformities, reduces production downtime, and enhances product safety and process efficiency in facilities within the beverage, food, and life sciences industries. It complies with FDA 21 CFR Part 11 requirements and GMP guidelines.

... activated over a rotary switch with integrated artificial fault simulator used to test the Spark Tester fault detection capability assuring full calibration according to IEC standards. Properties: For calibration and testing of all Sparktester types Measurement of direct voltage, alternating voltage and pulse voltage Current measurement, such as direct current and alternating current Function testing of the fault detector, by means of artificial fault simulation. Benefits AC, DC, high-frequency and pulse voltage compatibility Testing up to max.

...Sometimes, small details are making the difference. The Calibration Kit is compatible with all offered Delta Robot tool carrier base plates. The calibration needle can be reverted to fit into the calibration plate with its rounded end or to point on a target with its sharp end to precisely verify the calibration results. The entire kit is offered with a handy case. For vision distortion calibration, the vision calibration grid is available in various standard sizes or can be ordered with project specific size. The coating minimizes reflections.

... functions for the setup, testing, and calibration of process instruments including pulse transmitters, measuring converters, measuring instruments/displays, switches, proximity sensors, counters, RTDs, thermocouples, and valve positioners, among others.

...1000:1 Precision Voltage Attenuator / Probe, 3-Channel The precision attenuators from Elsys can be universally used for data acquisition devices from all manufacturers. By allowing individual calibration of the DC and AC ranges, a precision of up to 0.5% is achieved. Input: 3x 4mm safety sockets, touch-protected according to IEC/EN 61010-1 1 socket 4 mm (protective earth) Attenuation: 1000 : 1...

...Tinsley measuring and testing instruments have enjoyed a worldwide reputation for decades regarding their precision and versatility of applications. Precision measurement technology, calibration standards, LCR measuring bridges, coil and transformer testing devices are the main focuses. The highest standards of quality and compliance with national standards are a matter of course.

... transmitter is the proven GEMÜ CleanStar® technology • Operating medium is hermetically separated from the measuring transducer by a patented PFA double membrane • Free positioning of the manometer by 360° allows for individual user options • Production, assembly, calibration, and packaging in a cleanroom ISO 6 • Low dead space Connection type: Flare; NPT thread Drive type: without drive Max. operating pressure: 10 bar Max. medium temperature: 60 °C Min. medium temperature: 5 °C Nominal sizes: DN 4; DN 6; DN 10; DN 15; DN 20; DN 25...

... electronics in the connection head. A modern operating and calibration concept with automatic calculation of the measurement range allows for extremely time-saving commissioning of the analog measurement. Measurement signals in mA, percentage, or pulse values can be displayed as desired. An output signal corresponding to the measurement value is available as an mA analog signal, as well as a relay output. The membrane keyboard with function keys and a fully graphical display contributes to user-friendly and safe operation.

...Normal and abnormal signals - Safe separation by reinforced insulation up to 600 V (cat. II) or 1000 V (cat. I) - Manual zero and amplitude calibration...

...Torque Wrenches & Inspections at Our Facility Repair, adjustment, calibration, and certification of torque wrenches. Inspections (with inspection report) at your location. Short response time. Recurring schedule as preventive planning for your inspections. Fully equipped testing van in collaboration with our suppliers. Direct contact person and coordination point for services related to torque technology.

...EMI/RFI Shielding Hand and Pneumatic Pliers Metal Strips Calibration Unit...

...Drain hose with 90° angle (19 746) and anti-drip nozzle, manually closable, swivel joint (19 616), valve Housing including the chamber for the electronics made of aluminum die-cast, casting skin is not processed Shock-resistant electronics Easily readable large 5-digit display Display can be reset Rubber buffers provide shock protection in tough applications Measurement accuracy can be adjusted to viscosity via the calibration factor User-adjustable display units: liters, gallons, pints, quarts LxWxH (mm): 590 x 120 x 155: Weight including packaging (kg): 20.6...

...With a measurement technology range of over 40,000 items, we provide the optimal solution for every task. Additionally, we offer comprehensive and customized services. Overview of Services Calibration * Metron – the SCS-accredited testing laboratory * On-site maintenance & servicing ConturoMatic – the all-in-one measuring device * Quality Control software solution * FUTURO connected...

...The MTI is a cost effective set of test interfaces (modules) between tested unit and measure equipment. It includes common module as voltage, current, differential types but also easy to be customized. All modules are based on high performances components and provide a galvanic isolation including common supply (5Vdc). Applications: cost effective test set-up, educative element to practice: sensor adjustment, calibration, different technologies and their performances.

... integrated ultrasonic sensor, and a remote transmitter for cabinet or wall mounting to couple with the Bürkert 8170 sensor. • Compact or remote version for level measurement up to 10 m • Multilingual menu-driven operation • Interference filter • Automatic calibration through teach-in • Additional features (simulation, programmable container shapes) For proper product selection, please pay attention to the technical data, illustrations, and instructions for intended use according to the data sheet.

... lifespan Self-test function C-Test station for gas testing and calibration Event log via IR interface Programmable device labeling Display via screen and LED when gas testing (Bump) is due Lifespan 2 years Measurement of H2S, CO, and O2...

...NDIR Analyzer / Paramagnetic Oxygen Analyzer Plus fully automatic calibration...

...Floor scale 7766*, 2823 painted, suitable for calibration Weighing bridge made of painted steel RAL 7001, bolted bridge plate, weighing cell made of nickel-plated steel, IP 67, load acceptance according to DIN 8119-4, nominal load 2...

... for testing fields and laboratories - Portable calibrators for electrical, thermal, and mechanical quantities - Precision and high-precision resistance decades - Calibration devices for mechanical quantities - Standard and precision resistors Signal processing for the process industry: - High-quality devices and systems for analog and digital signal processing - Measurement data processing and...