cast iron Switzerland

...This is cooking and grilling on cast iron or aluminum. Around an open fire. An experience for your guests. As an accessory for your fire pit or as a complete package. Prepare the entire dinner together with your guests by the fire. This can be achieved with the cast iron fire kitchen. The fire kitchen fits our fire pits with an 80 cm diameter, or can be ordered as a complete set with a lid. Cast iron retains and distributes heat exceptionally well. The approximately 50 kg heavy ring is cast in Switzerland.

PLASTIC APPARATUS CONSTRUCTION IN SWITZERLAND Our plastic apparatus construction company offers customized, tailored solutions. Through the continuous development of thermo- and thermosetting materials and the optimization of process engineering, the consideration and use of plastics, as opposed to metallic materials, presents an optimal and cost-effective alternative for long-term investments.

...To increase the lifespan of worm gears, improve sliding properties, and enhance emergency running characteristics, the worm wheels are made from special centrifugal cast bronze. This ensures an optimal material pairing between the wheel and the shaft. The centrifugal cast blanks are also sourced from reputable subcontractors. Depending on the requirements, other materials for the worm wheel are also used, such as special brass or spheroidal graphite cast iron, which is further subjected to surface treatment after machining.

... 177.1550) • Installation length according to ISO 5752/20, EN 558-1/20, JIS 10K Connection type: Flange Drive type: Without drive Body material: 1.4301, stainless steel; EN-GJS-400-18-LT; S355J2G3 steel; spheroidal cast iron Max. operating pressure: 10 bar Max. media temperature: 200 °C Min. media temperature: -20 °C Nominal sizes: DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 900; DN 1000...

...Outstanding features include a significantly longer lifespan, the ability to withstand high loads, as well as better surface quality and dimensional stability compared to, for example, rollers made of steel or cast iron.

... ZIRCONIUM OXIDE CERAMIC - Very high fracture toughness - Very high bending and tensile strength - High wear resistance - High compressive strength - Very low thermal conductivity - Thermal expansion similar to cast iron - Elastic modulus comparable to steel - Oxygen ion conductivity - Very good tribological properties - Excellent surface finish and sharp edges possible...

...The SWISS SPEEDY edge milling machines are high-quality, portable power tools. The unique concept and performance make them top products. Extremely easy to use. Set up on-site without fastening. Reduced setup time and flexibility in application. Swiss Made. Applications: Steel, cast iron, aluminum, non-ferrous metals, acrylic glass, plastics, wood, etc.

...Drainage Channel made of Polymer Concrete, Class A 15 - D 400 Drainage Channels made of Polymer Concrete Aco Drain Multiline channel body made of polymer concrete - channel system according to DIN EN 1433 - nominal widths 100 - 500 mm - load classes A 15 - E 600 - optionally available with edge protection in galvanized steel, stainless steel, or KTL-coated cast iron. Design for vertical/lateral connection, with lip labyrinth seal (LLD).

...The motorized chassis for steel beams with a load capacity of 6300 kg are durable and wear-resistant, making them ideally suited for use with overhead cranes. Motorized Chassis GMF1250 - 6300, up to 6300 kg Motorized Chassis for Steel Beams Side panels made of gray cast iron with fall and climbing protection Running wheels made of gray cast iron, ball bearing mounted 1 or 2 speeds Flange width infinitely adjustable Control box with easily accessible connections Optional with travel end switch Optional with remote control Switzerland: Switzerland...

... temperature coefficient. The material is composed of iron, cobalt, nickel, aluminium, copper, and niobium. Sintered alnico magnets can be made in more complex shapes than cast alnico which must be machined mainly by grinding. Temperature Effects: Alnico magnets tend to be very stable with respect to temperature. Changes in magnetization are reversible and loss of magnetization can be recovered by remagnetization for temperatures up to 538°C. Applications: Alnico magnets are mainly used for speakers, microphones, motors, measuring instruments, flywheel generators, sensors, holders, stepping...

... pressure reducer from Berluto is available in connection sizes R 1/2" to R 1" with the same installation dimensions as standard market models (e.g., Honeywell Braukmann D06F, or Helveticus). Design Housing made of red brass, spring cover made of fiberglass-reinforced plastic (up to DN 32, from DN 40 made of gray cast iron), dirt filter screen made of stainless steel, seals made of NBR, membrane made of fabric-reinforced NBR, dual-sided pressure gauge connection G 1/4", connection fittings made of brass, DVGW certified up to DN 32.

...Vulkollan wheels, wheel bodies made of cast iron, wheel bearings with precision ball bearings with or without cover. Temperature resistant from -40 to +80 degrees C. Cylindrical bandage design with steel ring (other dimensions and designs available upon request). PLUS trak is also available as sheet material. It is advantageously used in conveyor systems, for example, for bottles or jars. PLUS...

...High material removal, finest surface qualities, and parallelism in the micrometer range are the outstanding features of this process. Materials such as steel, sintered metal, carbide, brass, bronze, aluminum, cast iron, glass, and ceramics can be processed effortlessly on our "Lapmaster Wolters" fine grinding machine. Thanks to the latest technology of these machines, we can offer you medium and large series at attractive prices.

Trading company for rope and lifting technology, manufacturing of chains and ropes for lifting loads, fall protection safety, crane ropes, galvanized and stainless steel ropes of all kinds.

As a global supplier of cast parts of all kinds, foacas has been offering you all the advantages of economical and global sourcing of casting products since 2008. Specifically in investment casting, die casting, and sand casting processes, we support our customers to ensure that the parts can be optimally positioned.

... state-of-the-art 3D measuring machines and a laboratory for X-ray, spectral, and strength analyses, we ensure the quality of our products. Our continuous improvement process (KVP) continuously optimizes production processes. We are certified according to ISO/TS 16949 (Quality Management) and ISO 14001 (Environment). Aluminum die casting, aluminum casting, aluminum parts, die casting, tool making, aluminum foundries, light metal casting, magnesium die casting, aluminum and alloys, magnesium casting, tool construction, vacuum die casting, structural casting, die-cast parts.

Manufacturing and Export Dept. Model Joinery Dept. Iron and Metal Foundry Gray cast iron according to EN 1561 Spheroidal cast iron according to EN 1563 Alloyed cast qualities according to DIN 1695 (Ni Hard) Austenitic cast qualities according to EN 13835 (Ni-Resist) Bainitic cast qualities according to EN 1564 (ADI) Construction cast Heat-resistant and special cast Machine cast Casting of...

... with our own truck service in Switzerland, Austria, and Southern Germany. Electric Motor Industry Safe and economical cleaning of the windings of electric motor stators without damaging the aluminum, the T-frames, or the "Cast Iron". There is no difference whether the motors are impregnated with epoxy or "varnish". With our cleaning systems, we free your stators, end bells, and other parts from...

Technology has always fascinated us. The initial discovery of the product, the optimization of its application, and the further development together with our customers at market-compliant costs is our challenge. From the very beginning, we have been captivated by screw foundations, and since 2003, we have been engaged in their application, distribution, and development in Switzerland. While the...

...The following manufacturing categories we serve: - Turning from bars up to max. Ø65mm → (100 pcs - 50,000 pcs/year) - Bar turning up to max. Ø38mm (100 pcs - 300,000 pcs/year) - Milling up to max. 200x200x200mm (20 pcs - 10,000 pcs/year) - Long turning machine park with bar loader - Multi-spindle automatics (up to 300,000 pcs/year) - Various assembly and deburring work - 3-, 4-, and 5-axis CNC centers (20 pcs - 10,000 pcs/year) - Specialization in stainless steels - Processing of cast iron, non-ferrous metals, and wrought alloys - Set up for medium to large series from 100 pcs - 300,000 pcs/year...

Trade and distribution of precision castings, die castings, chill castings, and sand cast parts.

Tool making, mold making, foundry with die casting and sand casting, aluminum cast parts, heat treatment, hardness testing, machining, quality control...

Manufacturing of zinc and aluminum die-cast parts in small to medium production batches, including machining. Part weight up to 6kg.

I replace, repair, or polish for you: steel, cast iron, and acrylic bathtubs and shower trays with a 5-10 year warranty! Bathtub and shower tray replacement without tile damage!