high pressure Switzerland

... applications in industrial high-pressure cleaning, vehicle cleaning, the chemical industry, the food industry, water treatment, seawater desalination, air humidification (air conditioning, dust and odor control), process engineering, and much more.

...• For small to medium series • 300 g to 80 kg • Max. possible casting dimensions 850x850x850 (Depending on geometry, in one or two directions even more) • Approx. 15,000 castings per tool With this semi-automatic casting process, we efficiently produce large and pressure-tight aluminum castings of high quality and precision. The liquid aluminum is introduced into the mold from below with low...

...The motor features good starting and low-speed performance and has a high mechanical efficiency across the entire speed range. The output is delivered via a continuous hollow shaft, which provides ideal mounting options for planetary gears or a second shaft end for brakes or speed measurement. The oil connections can be axial or radial. The motor is suitable for a maximum continuous nominal pressure of 210 bar and intermittent pressures up to 315 bar, with speeds ranging from 0 to 2700 min-1. It is available in 6 sizes from 79 cm3 to 491 cm3. These 6 sizes cover a torque range of 0 to 2335 Nm.

...The Cerabar PMP11 is the most cost-effective compact pressure transmitter in its segment. The piezoresistive sensor can measure relative pressure from 400 mbar to 40 bar. The PMP11 has been designed to withstand the conditions of the process industry, thanks in part to the use of high-quality materials such as 316L. The device can be used in standard applications within the process industry...

...Thermal mass flow meters and mass flow controllers with analog or digital interfaces. Available in IP40 and IP65 versions. Elastomer-sealed. Suitable for high-pressure applications up to 700 bar! For applications with high pressure differentials, Bronkhorst High-Tech offers a special series of EL-FLOW® and IN-FLOW mass flow meters and controllers. Patented PN400/PN700 control valves can be...

...LTB particulate filters are made from high-quality filter media with varying degrees of separation (filter class E11-H14). The filter media are shaped into a compact and stable pleated pack. This creates an optimal V-shaped fold arrangement, which leads to low pressure loss while maintaining consistently high separation performance. To extend the service life of the particulate filters, compact...

...Our range of round and flat spray nozzles clearly stands out from the competition in terms of spray quality and durability. We offer a very wide and deep selection of nozzle inserts. This enables us to meet almost all market needs. Application Areas Working with high-pressure guns Concrete removal, tank cleaning, as an application for pipe cleaning nozzles, general cleaning tasks, surface cleaning...

...Triple eccentric high-performance shut-off valve with metallic sealing, designed for high temperature, high pressure, and critical applications.

...We are your partner for maintenance, servicing, and repairs for your CNC-controlled machine tools. We service and repair machine tools of all kinds: Water jet systems, conveyor systems, change tables, high-pressure pumps, etc.

...Screw sleeve for HD high-pressure hose 8.6 x 4mm in steel, zinc/nickel Length = 28mm, Wrench size 12mm Advantages of ZnNi coating - Very high corrosion resistance - Free from chrome VI - The zinc-nickel base layer has a significantly higher corrosion resistance than zinc. White rust appears only as a light gray haze. - Proven to have better corrosion resistance than the previous A3C standard. - A well-established standard among European automotive manufacturers for years.

...«sandmaster» Pressure Blasting System • Pressure blasting system with 25 l tank The pressure blasting unit 115 PB is specifically designed for tasks where high material removal performance is essential, thanks to its efficient pressure blasting system. With the optionally available rotary tables, even heavy workpieces can be processed effortlessly. High-performance dust extraction with cyclone separator (filter area 14.4 m²) • Working space 1150 x 800 x 840 mm (W x D x H) • Dimensions 1315 x 1745 x 2305 mm (W x D x H) • Power consumption 2800 W, 400 V 50 / 60 Hz...

...Our pipeline builders install new lines for you in compliance with standards and elegantly, if necessary, combined with testing and acceptance. Processes result in defined routes where media are transported at the correct speed and quantity. Sensitive media such as food or media under high pressure require professional and, in some cases, legally mandated testing of production and installation...

... hose filters enable complex applications. For medicine – fine-mesh, round-woven, sterile hose filter elements guarantee the highest reliability. For chemistry – media-resistant hose filters ensure a long service life. For environmental protection – seamless filter hoses withstand high pressure loads. Filter belts/binding bands made of PES, PA, PP, PVDF, PPS, PTFE, etc.

...Ex Line – Unloading Ex Area The EN 92 Ex power supply is suitable for direct use in explosion-hazardous areas (Zone 1 or 2). The device complies with European ATEX directives. All high-voltage components are housed in a pressure-resistant encapsulated enclosure. The EN 92 Ex power supply features two high-voltage connections for connecting ionization devices. Long high-voltage cables are not...

... Additionally, the measuring device can be used for non-ferrous and offshore productions. Properties The measuring principle is based on state-of-the-art CCD technology with several point-source LEDs as lighting sources. Non-contact measurement Very high measuring rate Differently coloured LEDs illuminate the measuring axes, for interference-free measuring during simultaneous measurements or reflecting products Integrated interfaces such as Ethernet IP, Profinet IO, Profibus DP and others Integrated web server in all processor versions. ...

...Axial fans are particularly suitable for high air volumes combined with relatively low pressure increases. A variety of designs are available, which can be customized according to - Size (250 to 2800 mm) - Impeller types - Material - Installation position - Heat resistance - Explosion protection - Mounting - Accessories and sensors The drive motor is usually located in the airflow, but special designs with external drives are also available.

... LIST Twin-Shaft KneaderReactor, the high-torque shafts are designed to rotate in either the same direction or in counter-direction. In both cases, the kneading elements on the shafts intermesh to generate intensive surface renewal and mixing. At the same time, shear rates remain low. LIST Twin Shaft KneaderReactors are also nearly 100% self-cleaning. Typical design specifications: Volume: 3 … 10´000 l Operating pressure: 0.001 ... 10.0 bar (a) Operating temperature: -100 ... +400 °C Operation mode: Batch or Continuous Installed Power: ... 1.5 MW Torque: ... 500 kNm Drive: Hydraulic...

...The MAPRESS piping system is universally applicable and meets high demands regarding stability, temperature, and pressure.

...Refineries, chemical plants, power stations, tankers, and many other industrial facilities across all continents rely daily on high-performance materials from our company. Millions of vehicles are equipped with seals and damping sheets made from Polystrat. They reliably seal liquids and gases on board and ensure that the brakes operate quietly. All our products are developed in-house, tested according to strict criteria, and produced using self-developed equipment and processes. We ensure quality through state-of-the-art testing devices and in accordance with ISO 9001 and 14001.

... reliability and demonstrate the company's performance and solution orientation with every project. Service is a matter of attitude – Above-average expertise and high precision have been mentioned in the same breath since 1955. With decades of practical experience from technicians and specialists, knowledgeable consulting staff, and comprehensive services that have set true standards in the industry, ZW Hydraulik has earned great respect and an impeccable reputation.

... liters (EL20) are often designed as CIP systems for pressure sterilization to keep cleaning times as short as possible during product changes. With the early regulation of succession within the company, the expansion of the program through mixing and homogenizing devices with a volume of 50 to 400 liters, and the aim to continuously adapt the already well-established models EL-1 to EL-20 to market and customer needs, we hope to further expand our achieved market position in the future.

... years in line with changing standards. Stop Silent Light at a glance • Reliable backflow protection • Airtight odor flap • High-quality frog and amphibian flap • Suitable for sewage and rainwater • Available in sizes 100, 110, 125, 150, 200, 250, and 300 (larger sizes available upon request) • Designed for a back pressure of up to 0.5 bar • Simple and very quick installation Learn more about it: https://www.stopsilent.ch/de-de/light-rueckstau-sicherung/...

Using the latest technologies, we implement your needs; we produce, modernize, and maintain individual components and complete manufacturing systems in water jet cutting technology.

Anton Paar develops and manufactures precision laboratory instruments as well as high-accuracy process measurement technology, providing tailored automation and robotics solutions. With devices in the fields of density and concentration measurements, rheometry, and CO2 measurements, Anton Paar is the number one in the global market. The owner of Anton Paar GmbH is the non-profit Santner Private Foundation.

Repairs and overhauls of turning machines and machine tools, loading magazines and accessories, chip conveyors, and high-pressure systems.