control construction Switzerland

... shaft is optimal for use in aquariums, garden ponds, and for monitoring garden soils. It provides reliable measurement results for precise pH control. Robust plastic construction: The plastic shaft of the electrode is sturdy and resistant to the specific conditions found in aquariums, garden ponds, and garden soils. This ensures a long lifespan and reliable performance.

...From construction to final delivery, we keep everything in sight. Precise execution and full cost control? Of course!

...Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required Humidity:34 % to 99 % Uniform building code:seismic zone 2A Temperature treated water:15 to 35 ° C Side stream water pressure:4 bar (58 psi) max.

...The Magtrol KG-06 Extensometer is designed for measuring deformations of construction or machined parts under load. Because its output signal is proportional to the applied load, it can be used as either a load cell or a force transducer. The KG-06 Extensometer is ideal for strain measuring where large transducers are not suitable. Its small dimensions and flat mounting allow for easy control of deformations on steel structures. Strain transducer, impedance: 1000Ω Protection class: IP65 Compact dimensions: 6.5mm height...

... and other viscous fluids. The simultaneous mixing and cooling processes in the P1 allow for very efficient cooling and heating without the formation of deposits or the risk of product decomposition. Advantages Promix P1 heat exchanger Very efficient cooling of polymer melts close to the solidification point Precise temperature control and uniform temperature distribution at the outlet Very robust construction Extremely gentle cooling and heating of residence time critical fluids Unique self-cleaning behavior Reliably scalable from laboratory test to production scale Test options...

...The new low-cost sensor module control unit for all AF*-filling safety monitoring of basins, shafts, and tanks in the Ex area. The DIN rail housing is suitable for switchgear construction. Power supply 24 VDC ±10 % 2.5VA Connection for 1 sensor, intrinsically safe output Self-monitoring according to NAMUR EN107 RGB LED error status indicator Sensor measurement value monitoring and maintenance...

...The compact control unit with dosing function "C100-4.0" has been designed by H. Sigrist & Partner AG for industrial applications in production, development, and research. Cost-intensive planning, construction, and documentation of control cabinet systems and controls are rendered unnecessary! The compact control unit with dosing function "C100-4.0" has been designed by H. Sigrist & Partner AG...

...You present the problem - We build the technical solution for you. Special Machines You present the problem - We build the technical solution for you. Design We work with a modern CAD system (INVENTOR) on your demanding tasks. Control Engineering We define the control process and take overall responsibility. Our partners develop and write the software, build the control cabinets, wire the machines, and assist us during commissioning.

...Steel bushings are used for the repair of holes in construction machinery, cranes, excavator buckets, excavator arms, loading shovels, grapples, and demolition tools (hardened inner running surface). Hardened wear bushing for the repair of holes. The thick-walled steel bushings are used for the repair of holes in construction machinery, cranes, excavator buckets, excavator arms, loading shovels...

...Our high-precision and durable guide elements are universally applicable in tool, machine, measuring device, and apparatus construction. In addition to our extensive range of standard guide elements, our custom guides ensure that individual solutions are implemented optimally, quickly, and economically – with maximum quality and outstanding service life.

... are experts in apparatus and pressure vessel construction and have comprehensive knowhow of the pressure equipment directive. For control, testing KASAG offers a wide range of non-destructive testing methods. Please get in touch with us, and our KASAG experts will be glad to offer you expertise.

...Smart Connect Kit for sectional ceiling doors & tilt and swing doors. A unique solution for remote control of automatic garage and yard doors.

...The construction of exhaust gas scrubbers has been a core part of Sena Plastics AG's offerings for many decades. Our systems in the field of exhaust air ensure clean air and comply with the latest regulations.

...For over 20 years, enclosure construction has been a pioneering business area for us (formerly JAEGER AG). Functional, stable, and aesthetically pleasing – ideally, an enclosure meets these requirements. To ensure you receive a casing tailored to your needs, we offer comprehensive consulting and develop an enclosure entirely according to your specifications.

...Activated on-site in just a few seconds Very robust, compact construction Reversible fork with adjustable width • Two Ø 200 mm wheels for easy on-site transport • Base equipped with 2 stabilization arms Feet with height-adjustable wheels Twist-resistant lifting cable in very good condition, high-strength steel • Level for perfect control of foot positioning Lifting winch with automatic brake Steel rollers on bearings...

...Custom solutions tailored to the customer are what distinguish our switchgear, handcrafted in Switzerland. The team at RJR Elektrotechnik sees itself as a manufacturer of switch, control, and metering systems.

...The Turbimax CUS51D is an intelligent sensor that enables unattended operation in a wide range of process conditions. Its unique construction is extremely robust. It requires minimal maintenance thanks to its self-cleaning function. Using the integrated analytical models, you can adapt the sensor to your application. With Memosens, the CUS51D combines maximum process and data integrity with simple operation. It is resistant to corrosion and allows for laboratory calibration.

Portrait Sheet Metal Processing at Its Best Stamped, laser-cut, and nibbed, cut, bent, and welded: More than 2,000 tons of sheet metal are shaped each year at Beni Burtscher AG. Since its beginnings in the early 1980s, Beni Burtscher AG has made a name for itself in the segment of high-quality sheet metal processing and fabrication. Today, this innovative supplier company, with locations in Schw...

...The ODMR (Overrun Deperming and Measurement Range System) is a system designed to reduce the magnetic signature of ferromagnetic ships and submarines. The method of magnetic treatment allows for the control and minimization of the permanent magnetic signature. The effectiveness depends on the specific class of the ship being treated, the magnetic behavior of the steel used, the magnetic history...

...regardless of the type of control system, the size, or the age of the excavator. A simple mechanical solution protects you from the risk of an incorrectly locked rear axle of the attachment. The quick couplers based on the Scandinavian S-Standard are fully compatible with all quick coupler systems that fall under the "Open S-Standard," even in fully hydraulic versions.

... galvanization ensures a very long lifespan. If desired, the sliding gate can also receive the color coating of your choice. In addition to standard sizes, we can certainly offer you customized solutions for almost all wishes and needs. This applies to both the metal construction as well as the electrical control and operation of the system. Please feel free to contact us so that we can create a non-binding offer tailored to your needs.

...Elegant and compact The system SL can be used for assembly tables, in assembly units, for office desks, height-adjustable beds and baths, and for general use in furniture construction and mechanical engineering. The T-slots on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg. Each leg has an internal motor that drives the threaded spindles. These are driven synchronously by the control unit. Accessories...

... of switching elements is available. The switching contacts operate with a minimum current of 1 mA, making the STA safety switch suitable for operation with safe control systems. Features: - Robust construction - 3 cable entries - High protection class IP 67 - Optional LED...

...Control dimension "X" adjustable and controllable during clinching - Y and Z axes adjustable - Indirect pressing force measurement - Force stroke of the TOX® power pack can be switched off during adjustment work - Matrix-side drive possible - Prepared for free-running sled - Prepared for process monitoring - Control module pre-installed and ready for connection - Standard frame sizes - Special geometries available upon request...

...The cold forming units, which can be mounted on special stands with an ultra-large working radius or stands constructed in portal form, solve tasks in all fields of industry. For example, they are widely used in car manufacturing and the aeronautical construction industry. Depending on the control system of the machine required, the units can work with their own control system or can be integrated into any machine control system of your choice.

... easy to read even in daylight. The count signal is processed by a microprocessor which allows also the detection of parts with particularly difficult shapes. The parts counter C1 is equipped with terminals for remote control so that it can be combined, for example with packaging and filling machines. The C1 seed counter is the successor of our model 600, which was produced from 1980 for about 25...

... steel versions. There are special designs for explosion-protected areas. Suitable for indoor and outdoor installations. Car Designs: Flat conductor cars with support diameters from 50 to 400 mm. Round conductor cars with hooks or ball joints for round conductor holders. Special designs for specific applications. Ideal control cars.

...The selection of freight elevators from Omer SPA starts with a load capacity of 750 kg and goes up to a load capacity of 1,500 kg. The structure of the machine is therefore suitable for lifting heavy weights. Consequently, it can be said that the selection of freight elevators from Omer SPA is primarily industrial. The construction consists of two columns that are welded in parallel to provide more strength to the structure, as well as a central hydraulic cylinder manufactured by Omer SPA, which is connected to an appropriate control unit.

...The portal machine with "Box-in-Box" construction for even greater flexibility! The passage height of 2000 mm with a passage width of up to 4500 mm and an almost unrestricted X-axis travel allows for 5-axis machining of complex parts in a single setup. Number of axes: 5 Y-axis travel: 2,500 - 6,500 mm X-axis travel: 6,000 - 24,000+ mm Z-axis travel: 1,250 - 1,600 mm Spindle power: 42.0 kW Spindle speed: 6,000 rpm Spindle torque: 1,600.0 Nm Tool-to-tool time: 10.0 s Control: CNC...

...Plastic enclosures and small control cabinets made from polycarbonate, ABS, polyamide, and polyester ROSE and BOPLA plastic enclosures are suitable for harsh and demanding environments. They have been successfully used for decades in mechanical engineering, tunnel construction, vehicle manufacturing, and measurement and control technology. The enclosures are available in polyester, ABS...