suction arms

... industrial sectors (articulated and adjustable arms for industry), but there is also a specific range for laboratory use (laboratory arms). For the extraction of explosive dust and flammable vapors, AWITECH offers a complete range certified ATEX.

...Extraction arms for capturing smoke and fine dust. Long arms 1000 - 2000 - 3000 - 4000 - 5000 - 6000 Ø100 - 160 - 200...

...Articulated arms and sliding rail system with service terminal for energy distribution (electricity, suction, compressed air). Visit our website stucchi.net or contact us at info@stucchi.net...

...The flexible and maneuverable extraction arms ensure an optimal capturing position at the source of pollutants. The articulated arms, often referred to as 'boas', are extendable and adjustable devices that allow for the capture of fine dust, vapors, and fumes as close as possible to their emission point. The articulated capture arms are specially designed for workstations and serve as highly...

...ATEX suction system with localized capture and gas detection - suction system for securing the production and aerosol packaging department, with localized capture for ventilation and remediation of areas affected by aerosol product vapors and alcohol-based products - ATEX fans zone 1 - Electromechanical control dampers for flow interception - ATEX localized capture suction arms zone 1 - ATEX...

...Standard Dimensions: (75x150h) cm It features three articulated arms. The joints can be easily rotated and moved, allowing them to hang in the air. Once positioned as desired, the joints can be locked in place. There is a counteracting spring system to prevent the hood from sagging. The movable and stationary joint parts of the local air suction arms are made of chemical-resistant plastic. The suction pipes are made of anodized aluminum. The suction mouth has a transparent plastic hood. It includes a manual damper to adjust the airflow. The radius of movement for the local suction unit is 1500mm.

...We distribute the suction arms of the Coral brand, including the EVOLUTION, UNIVERSAL NOSMOKE, and PROBIS models, as well as the associated filtration groups and units CLEANING NOSMOKE, JETCLEAN, and HYPERJET. Please feel free to contact us for additional information or to discuss your project. Standard Coral components distributed.

...External parallelogram support structure with gas springs for optimal unrestricted airflow – maximum flow – minimal deposits •Polyester aluminum suction hose DN 38mm-200mm •Lengths from 1m – 4m, extendable to a radius of up to 9m with a swivel arm •Includes wall mounting with swivel joint, hose, funnel with shut-off flap (from 80mm), fully swiveling •Arm operates smoothly and is positionally stable •Suitable for extracting welding fumes, light dust, and gases.

FIPA GmbH has established itself in the market as a competent system provider in the fields of gripping technology and gripper construction, vacuum technology including vacuum suction cups and a variety of vacuum components, as well as crane and lifting technology. FIPA Grippers – durable and low-maintenance Our range includes quick-change systems for coupling grippers and robots, gripping and su...

... workpieces with suction connections, movable suction arms for suction of welding gases together with mobile filter units, suction hoods, walls and pipelines, industrial vacuum cleaners for cleaning the working environment for feeding or operating filter systems. All products comply with ISO 9001: 2015, ISO 3834-2: 2005, EN 1090-1: 2009 and EN 13084-7: 2012.

...Suction systems with special plates which fit perfectly between the profil peaks - Due to its construction and suction plate form this panel suction system can be employed for both wall and roof panels It can be adjusted to fit the individual panel forms and profiles. By the deployment of extension arms even very long panels can also be safely and stabily transported.

... and a special emptying device for the dust bag. The motor housing, handle, and arms are made of abrasion-resistant fiberglass-reinforced plastic. This makes the FLIP® a very robust machine. The various arms can be changed quickly and easily, allowing the machine to be directly adapted to the conditions of each job site. The FLIP is available with a short, long, or corner arm. Universal motor: 230 V / 1.35 kW Protection fuse: at least 10 A Sanding plate diameter: 150 mm Corner plate diameter: 60 mm Plate speed: approx. 3100 rpm Corner plate speed: approx. 7750 rpm Total weight: 9.8 kg...

...Combine individual products into a custom holder that perfectly addresses your specific needs. Bases come in various shapes and mounting types. Whether small and round or large and square. From fixed mounting on a surface, to mounting around a profile, to tool-free and flexible attachment via magnet or suction cup. Connecting arms link the base mounted in the vehicle with the device holder.

... applications with a minimum of clamping pressure. This allows the diamond particles to get a firm grip on a very small area with minimum damage to the surface. The diamond surface offers excellent wear resistance. Form P: The polyurethane surface is vulcanised firmly to the ball. It is abrasion-resistant and does not discolour. It offers optimum protection against damage to delicate surfaces. The pearl-like surface gives a firm grip and allows air to escape so as to prevent any suction effect between the contact surface and the self-aligning pads. Reference:07113...

...This means you can control the right and left side of the vacuum gripper independently of each other. Seamless integration into the robot of your choice. For example Universal Robots, Nachi, Doosan, Yaskawa, TM Robot, Kawasaki, ABB, Kuka, Hanwha, Fanuc. The vacuum gripper is equipped with double gripper functionality, a tool changer and various common suction cup attachments. In addition...

... • Target Areas: Abdomen, Hips, Flanks, Thighs, Buttocks, Arms, Knees • No side effects, just a bit of redness that disappears after a few hours The Principle of the Technology: The patented technology of SONIC Shaper® is the intelligent combination of ultrasound wave emission - emitted at frequencies specifically designed to quickly empty fat cells - coupled with a pulsed and controlled mechanical suction that enhances the destruction of fat cells and improves the...

... disinfectant container is empty, a sensor signals this with 2 flashing lights. The turnstile will remain locked until the container is refilled. An emergency stop button allows for complete unlocking of the turnstile in both directions. WARNING: The turnstile arms are not retractable, so the passage cannot be used as an emergency exit. Electrical connection 230 V – 50 Hz...

...The extraction arms from ESTA capture welding and soldering fumes, dust, gases, and vapors right at the source. They can be connected to a central extraction system via piping or fans, and can be flexibly and easily positioned within their reach using gas pressure springs. Thanks to the external construction of the support, the airflow is not obstructed, ensuring effective extraction at all times. We deliver our extraction arms fully assembled. This saves you valuable time and eliminates unnecessary errors during installation.

...Extraction arms with working radii from 0.8 to 11m Suction mouthpieces customized as needed - Point extraction arm for high vacuum - Extraction arm 4m - Extraction arm 11m with catch...

...Our delivery program includes extraction arms in all common sizes and variations. From the mini arm with a diameter of 50 mm to 8-meter-long arms with wall brackets and a diameter of 250 mm for particularly large air volumes, we offer suitable extraction arms for every application, with internal or external joints, in hose or pipe design, or even in ATEX version made of V2A.

... cartridges. With their large filter area, the "PF-Jet" units are particularly suitable for high raw gas loads. Multiple extraction arms, extraction tables, or other capture sources can be connected to these units. The automatic control of the filter system monitors the contamination of the filter cartridges and cleans them automatically with compressed air (jet impulse) at the appropriate time. The cleaned dust falls into the mobile dust collection container. From there, the dust can be easily disposed of.

...Maggi Professional 400 CE Prepared for suction Engine brake with emergency stop Noise-reducing blade cover Cast iron arms and base 4 bearings PRODUCT CODE 15141120 Three-phase motor power 2 HP 1.5 kW Single-phase motor power 1.5 HP 0.9 kW Motor speed 2800 r.p.m. Blade diameter Ø 300 mm Bore diameter Ø 20 mm Shaft dimensions Ø 16x80 mm Suction hole on hood Ø 60 mm Suction hole on rear device Ø...

...Automatic glass cutting table with integrated loading arm is designed for straight and shapes cutting of float glass using the diamond cutting wheel technology. Integrated loading arms with suction cups load the glass sheets from the stock stand automatically. The cutting table can also equipped with a Low-E edge deletion system, which removes soft coatings glass (Low-E) from glass sheets easily with maximum quality.

... installation on the rear hydraulic levers of category 2/3, a tank with a volume of 1000 liters, a rear light, an anti-turbulence suction connection, and a suction filter. Optionally, the device can be supplied with smaller tanks in a different color, an electric pump, and a high-pressure cleaner at the back.

...FUMEX LF Extraction and Filtration System for Solder Fumes. With 1 to 4 extraction arms. For capturing solder fumes, extraction articulated arms with diameters of 50, 75, or 100 mm are available. With suction nozzles or suction hoods, depending on requirements. The fan can be continuously adjusted via a rotary switch, allowing it to be adapted to the smoke development. The filter is equipped...

...Group with fan, absolute filtration, and arms for dynamic containment in anti-contamination zones.

...The mobile dust extraction unit NefRal can be connected to permanently installed dust extraction lines or equipped with flexible extraction arms. Suction power: 1,000 or 1,100 m³/h Fan power: 0.55 or 0.75 kW Filter area: 8 m² Pneumatic filter cleaning Dimensions (L x W x H): 0.68 x 0.91 x 1.13/1.16 m Collection container: 2 drawers With or without extraction arm Suction power: 1,000 or 1,100 m³/h Fan power: 0.55 or 0.75 kW Filter area: 8 m² Dimensions (L x W x H): 0.68 x 0.91 x 1.13/1.16 m...

...Due to their various sizes and designs, the mobile extraction systems can be used at a single workstation or at multiple workstations simultaneously. The mobile extraction systems can be operated directly at a processing machine, a suction table, or with extraction arms.

... surfaces. GoPro Suction Cup Mount in Action Included: - Suction cup - Swivel arms - Standard plate - Quick-release plate - Drawstring bag Caution: The long screw shown (under the camera) is not included! Manufacturer part number: AUCMT-302 EAN: 0818279010695 Item number: gi-197...