synthetic casting

...Do you want to have a specific part made? Based on models, drawings, or plans provided by the client, Ets CHAPUT manufactures unique pieces or series in the desired material: natural or synthetic rubber, silicone, or polyurethane. Creation/machining of the mold in steel or silicone Prototype manufacturing Production by compression for rubber and silicone parts or by free casting for those in...

...Molding is the action of taking an impression that will then serve as a mold in which a material will be placed, allowing for the casting or production of multiple copies of a model. Heated raw rubber is injected into a mold.

...ALWA MOULD SLV is a universal two-component fast casting PU resin for mould making. It is used for the production of milling devices, negatives, product holders, foundry moulds, mould plates, copy moulds, core boxes, pattern plates, casting moulds, prototype parts, supporting moulds and synthetic cast. It consists of a beige-brown low viscosity resin component A (polyol mixture) and a red-brown...

... applications up to 5 cm layer height - Multiple casting layers possible - Forms a crystal-clear, non-sticky surface (water-clear) - Improved UV resistance, low yellowing - Good mechanical properties - High impact resistance - Cures at low temperatures, usable from 18°C Casting applications up to 5 cm, decorative casting, making jewelry, casting tabletops. By adding the UV stabilizer BEL91 (in epoxy resin), long-term stability is increased! This system can also be colored with our color pigments, color pastes, or dyes. Note: All raw materials are free from nonylphenol or DETA!

...Each shelf is internally lit with LEDs, casting a gentle glow on your products, enhancing their features and inviting customers to take a closer look. UV-Printed Synthetic Back Panel: The rear panel is made from a durable synthetic material, expertly printed with UV technology for a stunning visual that speaks volumes of your brand's commitment to quality.

... century as one of the first synthetic materials – plastics. It is a material well workable using various technologies, e.g. rolling, extrusion, depositing, or casting, therefore it is predestined for wide range of applications. PVC has a unique combination of features, which can be further modified in various ways using processing additives. PVC is usually classified into softened - called most frequently PVC-P, ands hard - called PVC-U. Polyvinylchloride ranks among materials that can be recycled well and reused in the manufacture of products. Recyclable PVC is marked PVC-R. In general,...

...evaluate the consistency of the mixture and, if necessary, gradually add in the last of the water until achieving the desired workability, without exceeding the limit of 12% (3.0 litres/25-kilogram bag), mixing at high RPM for at least another two minutes. For thick casting sections, it is advisable to add Ghiaietto 6.10 (consult the relevant technical data sheet or ask for more information on the...

...Our two-component casting compound for your models, figures, molds, or negatives. The TFC PU casting resin impresses with excellent flow properties, very high strength, and impact toughness after curing, and is virtually odorless. The application follows a simple 1:1 mixing ratio of resin and hardener, which you can color with our casting resin colors. After final curing, our PU casting resin can also be easily drilled, sanded, or painted.

...Casting resins based on epoxy or polyurethane for the areas of fast-casting resins and for large-volume castings. Also for the production of prototypes and applications in RIM and vacuum processes.

... polyethylene compounds by forming a robust molecular network within the polymer matrix. This ensures a significant reduction in the final melt flow index while maintaining optimal mechanical and chemical properties, compatibility, and transparency in the final product. 3. GS PAM-70 is a polyethylene-based processing aid masterbatch that contains synthetic processing aid agents, demonstrating high compatibility, excellent processing performance, and non-discoloring properties.

...A casting resin is a synthetic resin that is processed in liquid form into the final product and solidifies as such or as part of it.

... accuracy with excellent surface quality. To produce a "Croning" cast part, molds and cores made from zircon sand, coated with synthetic resin and then dried, are used. The mold halves are glued together and then cast. After the casting process, the component undergoes mechanical processing according to customer specifications and a quality inspection of the components. Component weight: max. 25 kg Proximity to final contour: medium Quantity: medium...

...The main activity of our company is the wholesale trade in natural and synthetic rubber along with chemicals for the rubber industry.

...HYDRANSAFE HFC 146 is a high-performance synthetic hydraulic fluid based on water polymer, fire-resistant. Regulation and hydraulic circuits for furnaces, continuous casting units in the steel and aluminum industries, heat treatment furnaces for quenching operations, drying ovens, and other applications in fire-risk areas, such as in the mining industry. Hydraulic systems of injection molding...

...machines and instruments, tool making, sinking and wire erosion. The mixture of synthetic, mineral oils and solvents with a mild odor is an all-round solution for any workshop and manufacturing. Butol is unusually capable of creeping, automatically penetrating micro-pores and cracks, gaps, overlaps, etc. Its highly distilled petroleum serves as an excellent rust remover and sustainably penetrates layers of deposits such as metal oxides, corrosion coatings, grease, and dust.

...Light, synthetic oil with extremely powerful release for minimal-/micro spraying Alloy Al, Mg Properties and Advantages • film-forming ability at temperatures exceeding 400 °C • release agent for minimal-/micro spraying • improved viscosity for even better atomizing • start up of new dies • forms release layer lasting multiple cycles • reduces metallization in problem areas • replaces traditional pastes (e.g. silver- and acid containing pastes) • significantly reduced smoke development • 25 % more active substance compared to Isolat® UP 78...

...Putty based on plant and synthetic oils with oxidative surface drying. Areas of application: Sealing of single glazing in painted wooden frames. Usable for stress group 1 according to the Rosenheim table (up to 80 cm edge length), excluding laminated safety glass and casting resin combinations.

... 5000 years since its discovery. There are two kinds of soda ash: naturally occurring soda ash, which is produced from trona ore and is ready for use after filtration; this grade is available only in Turkey and the USA. The other type is synthetic soda or inorganic soda ash, which is produced from chemical processes—in simple terms, it is made from the combination of sodium and carbonic acid, reacting with ammonia. Soda Ash Light is used in the production of detergents, chemicals, textiles, paper, other sodium compounds, and in the casting industry and oil refineries.

... environment, the IntelliBlend control continuously analyzes all process data and, thanks to self-optimization, is able to define the best possible intervention point at any time. By adhering to recipes with maximum precision, the quality of the products remains optimal and consistent. The GRAVICOLOR series of devices is part of the motan product range for the treatment and processing of synthetic...

...Vitralit® adhesives and casting compounds are one-component systems based on acrylate or epoxy resins that cure in the shortest time when exposed to UV or visible light and can be thermally post-cured depending on the product. Depending on the application, curing times of 0.5 to 60 seconds can be achieved. This enables the shortest cycle times for mass production. The light-curing adhesives in...

...In the last thirty years, Stalam has developed and sold a large number of RF dryers specifically designed for natural or synthetic latex products (mainly mattresses, cushions, anatomical seats, and continuous sheets) after vulcanization and washing, squeezing or centrifugal hydro-extraction, hydrophilic polyurethane foam products after casting for medical and healthcare use, and other high...

... industrial plants Visual and design model construction The materials processed by us are predominantly wood, plastics, synthetic resins and aluminum. The production depends on the demands on the product through craftsmanship up to CNC technology. On request, all products can be measured with the latest measurement technology and supplied with measurement protocol. Our team consists only of competent professionals who implement all the requirements and deadlines set for the product.

... carbon Applications Clear coating - Decoration - Jewelry Applications Boating - Leisure Applications DIY - Models Applications Casting - Filling - Ballast packing Applications Bodywork - Fairing - Tuning Applications Sealing...

... parts (with no minimum quantity) and delivery. A flexible and adaptable company, it has an extremely quick response capability so that customers can find a complete purchasing package with everything arriving at their location in a single supply. For Iron Sale Europe, every customer is unique. The focus on people, stock, service, expertise, and respect for the customer are the main strengths of this company! Your Belgian partner for cast iron, brass, copper, aluminum, stainless steel, bronze, synthetic materials, sintered bronze, as well as many other products.

...Sealing - Impregnation of porous castings, Impregnation agents / Impregnation resins / Recycled resins Casting impregnation, metal impregnation, Synthetic resin soaking of sinter, and impregnation systems.

... production of technical ceramics are high-purity synthetic materials. Core technologies for the production of high-performance ceramics include prototype manufacturing through pressing and CNC-controlled green machining, as well as hot casting (low-pressure injection molding) for small and medium series. For larger quantities, high-pressure injection molding is also available for cost-optimized...

HÜBERS is a specialist and one of the world market leaders in plant engineering for casting and impregnation applications. The process technology for preparing, mixing, and dosing epoxy, polyurethane, and polyester resin systems, as well as LSR and RTV silicones, is a core area of our activities. Customers from the electrical engineering, electronics, medical technology, automotive industry...

...500/7, 600/3, 700/2) Melting Capability: 30,000 tons annually Molding Capability: from 10 to 18,000 kg Core Making Capability: hot box, croning and core sand synthetic resin binders Cleaning/Fettling: wheelabrator shotblast, swing and hand grinders and chippers Finishing: rough and finished machining capability by subcontractors, priming and finish painting, heat treating available to meet a wide range of requirements, packaging to customer specification, transportation Quality Assurance System: ISO 9001, Germanischer Lloyd. The majority of tests are processed in our own laboratory.

For over 53 years, we have been a supplier of synthetic resins such as polyester, epoxy, polyurethane, casting resins, glass mats, glass fabrics, De IJssel coatings products, and more. Our products are used for a variety of applications: yacht and body construction, repairs, insulation, everything in and around the house, floor coating, artistic and creative applications, model building, roofs...

... steel, aluminum, zinc die-casting, non-ferrous metals, synthetic resin, and acrylic, mobile dust extraction devices, pipe sanding systems, pneumatic and electric machines, parquet sanding materials, and other professional sanding products.