rods for concrete

...Pedestrian barrier post made of 60mm diameter tube with sphere, made of steel, powder-coated, 1200mm high with flange for chain, to be cemented or used with concrete base art. 5100. Dimensions: length: 6cm width: 6cm height: 120cm weight: 10kg diameter: 6cm...

...The cylinders used in lifting equipment must be designed in such a way that their weight is as low as possible. For this reason, welded constructions are mainly used, with piston rods made of tubes, often of special materials, which make it possible to reduce wall thickness while maintaining the required load limits. Particular attention must be paid to the welds, which are often inspected with...

...The A4 stainless steel anchor bolt is a fastening element designed to secure metal or wooden constructions, as well as safety barriers, in a non-cracked concrete support. Made of A4 stainless steel, it can be used in outdoor environments as well as in aggressive environments. Material: A4 Stainless Steel Diameters: from 6 mm to 20 mm Lengths: from 40 mm to 220 mm Permissible load for non-cracked concrete: C20/C25 Standard: ETA-01/0003...

...Anchor bolts are not just the connection elements between the steel and concrete surfaces but they are one of the most important element in steel structures. Anchor bolts are responsible for the transfer of loads between the steel and concrete member. The proper installation of the anchor is as important as the correct design and fabrication.

...Filling of cable containment sheaths in post-tensioned structures or anchor rods with the prevention of "stress corrosion" in tensioned steel cables. Maintenance and anticorrosion prevention works of degraded sheaths. Works in concrete or damaged masonry. Consolidation of conglomerates and cracked, damaged or very porous masonry. Bridging of discontinuities. Fastening of steel elements (pins, clamps...

...Unikabin is a cabin system designed to create a structure where the facade panels can be connected without rods, allowing for user installation. Uni cabins can be used individually or in multiples, with a standard panel height of 1500 mm for pet cabins, and they are suitable for installation on concrete or earth floors. System height: 1530 mm Board height: 1500 mm Board width: 200/500/800/1000/1200/1500 mm Panel frame: 30*30*1.5 mm galvanized box profile Panel wire: ø 3 mm / 50*150 mm...

... mixer"],"Description & Application Area":["The mortar can be applied in both dry and wet concrete","For overhead installation, the threaded rod must be secured according to the processing time","Approved for use with standard threaded rods or TOX threaded rod Stix"]}...

...Wire rod is an excellent consumable for the production and manufacture of knitting, spring, welding wire; electrodes for electric arc welding; hardware products; masonry and other mesh; ropes (cable) ; formwork manufacturing; concrete structures; metal structures . Wire rod can be either hot or cold rolled carbon steel. It is drawn on special drawing machines by drawing to a thickness...

...Satin finish, washable acrylic paint made from high-quality quartz powders for the decoration and protection of both new and old surfaces, such as gypsum or cement-based plasters, smooth plastered walls, concrete, drywall, wood, and generally non-ferrous substrates. Excellent for repainting, with very high coverage, and guaranteed resistance to weather conditions and ultraviolet rays. Washable...

... imagine. Demolition shears are used, for example, to cut angle iron or wire mesh, or to cut concrete ribs and steel rods. Our shearing knives or shear blades for mobile demolition shears are designed exactly for these massive stresses and have been used for many years on construction sites all over the world. ...

...COMPOSITION AND APPEARANCE Galvanized steel TECHNICAL SPECIFICATIONS Product dimensions • Height: 70 mm • Width: 60 mm • Length: 50 cm • Weight: 0.08 kg Average consumption • 0.4 per ml • 0.2 per m² PACKAGING Unit packaging: box Height: 14 cm Width: 17 cm Depth: 27 cm Weight: 2.5 kg Number of products per box: 50 pieces 96 boxes per pallet ASSOCIATED PRODUCTS Threaded rods: to be fixed...

...The profile resembles the H shape. They are wide-angled profiles. H-section structural profiles are primarily used in the construction of steel structures, but they are also utilized in reinforced concrete structures for support purposes. With their application in every area of construction in both low and high-rise buildings, they are also used in agricultural machinery, automotive, basic...

...European Technical Approval, Option 1, Approval No. ETA-05/0069. Concrete C20/25 to C50/60, cracked concrete C20/25 to C50/60, uncracked. Properties The Fischer FAZ II anchor bolts are suitable for pre- and through-mounting and, due to the longer thread, are also optimal for spacing installations. Applications in earthquake zones (seismic) are also covered by these approvals. Installation...

...Galvanized angle adjustable (concrete) - EARTHING ELECTRODE...

...Concrete picnic table Rio with a sandy stone finish, self-stable, seating for 4 to 6 people for your outdoor arrangements. Description of the Rio concrete picnic table: - Self-stable set. - Easy assembly. - Hidden screws. - Sandy stone finish. - Seats 4 to 6 people. - Dimensions of the assembled table: 150 x 169 x 77 cm. Ref: TPNR - Distance between rods: 66 cm. - Weight: 632 kg...

...This reinforced, stainless steel anchorage point - designed for concrete applications - does not create any tension in the substructure and is suitable for unprotected surfaces. It includes a base plate (150 x 150 mm) and a welded-on supporting tube (Ø 42 mm) for extra stability and is installed using the 4 anchor rods supplied. All you need is an installation depth of a mere 60 mm. EN 795:2012...

...The unilateral anchoring technology used in LOGO.pro allows anchor points to be operated by a single person - meaning that optimized work with fewer staff or even in confined spaces is possible without any issues. The major advantage of this new system lies in the fact that it is possible to use the rods either from one side or in a conventional manner, depending on the needs.

... easy to crane and move. They can be delivered with an alignment angle fixed to the side of the sheet of your choice to facilitate their alignment. These sheets allow you to quickly cast your expansion joints without wasting cardboard and polystyrene. They make it possible to gain flexibility while maintaining high pouring rates. In addition, thanks to these expansion joint sheets, you can use the concrete of your choice and the pouring technique that best suits your site.

...The main application of reinforcement is construction, in which almost all types of reinforcement are used: knitted mesh, steel rods, frames, corners. In construction, building reinforcement serves as a frame for a reinforced concrete structure. The reinforcement elements are connected to each other by welding or by bonding, contact the concrete and create a strong structure. Reinforcement is the basis of any building structure, which prevents deformation...

... is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m). If you are interested in cooperation or have any queries, please feel free to contact us at +380 93 53 13 653 (WhatsApp, Viber)/ email: rebar.union@gmail.com. ...

...The company is certified as a steel processing center and offers suitable solutions for civil and industrial construction. We perform flame cutting on beams and produce brackets, angles, and other elements using our bending machine with rods ranging from Ø 6 to Ø 24. We also work with iron to provide all reinforced concrete structures (foundations, columns, slabs, beams).

.../chemische-verankering?tc=chemische-verankering&page=1&paramskey=news Polyester resin POLY-GPG280-G-NL: Suitable for all common applications (fixings for roller shutters, shutters, water heaters, etc.). Polyester resin POLYGPGPLUS-G-NL: Suitable for 100% of common applications on hollow and solid masonry. AT-HP: For use on various substrates, such as concrete, brick, and aerated concrete.

...Comes complete with a 4-leg stand and the corresponding threaded rods and concrete bases. Mast and stand with a side cable outlet 30 mm wide, Catch masts Ø 50 mm with internal cable connection to the catch tip. 1 m catch tip Ø 16 mm With 4-leg folding catch mast stand 1.0 m segment type, footprint 1.3 x 1.4 m Weight of the bases: 16 kg: 4 x 1 = 68 kg...

... Garden materials (Lighting poles. Artificial grass. Grass fencing. Ceramic stone. Outdoor seating and huts. Garden accessories.) Mixing taps and faucets Chandeliers and indoor lighting Construction materials (Iron, Cement, Wood, Scaffold construction. Partitions and signals. Concrete mixing and pumping machines.)...

...On our specially designed stationary pipe cleaning system, we are able to completely clean pipes/drill rods, etc., from 1.5" to 13" in diameter and up to 10 meters in length, both inside and out. The adjustable operating pressure of up to 3,000 bar, specialized nozzle heads, appropriate nozzles, and a few small secrets make it possible to meet the sometimes very high demands and complex tasks set by our customers. Pipes can be freed from various deposits/coatings, such as dirt, corrosion, rubber, or even concrete. A very important point here is that the material is not damaged in any way.

...Proven millions of times Affordable lost installation parts Universal system for anchoring anchor rods for formwork and screws for fastening and transport purposes Installation in ceilings, floor slabs, and walls For in-situ concrete and precast construction 4 different anchor diameters, compatible with the Dywidag formwork anchor system from Ø 15.0 mm to Ø 36.0 mm Larger dimensions Ø 50 and Ø...

... machinery, woodworking, furniture, dairy, pharmaceutical, shipbuilding, and food industries. Elastomers are used to produce rods and sheets, rings, nozzles, connectors, fittings, automotive and tram bumpers, scrapers, wheels, and many other components. Additionally, polyurethane performs very well as a protective coating, for example, for metal or concrete.

...The software allows for the formwork of complex-shaped concrete structures using the dialog box below. The insertion of the formwork is interactive, and visualization can be in 2D, plan view, rear elevation, or in 3D. It is possible to display the passage of the rods and to control their position relative to the openings in the wall.

...FOR USE IN CONCRETE: 4 standard types Ø 16 - L 150 - F 70 mm Ø 16 - L 250 - F 125 mm Ø 18 - L 250 - F 125 mm Ø 20 - L 250 - F 125 mm All lengths on request, supplied with 2 HM nuts fitted, class 5.