production of moulds

... client. In our tooling production we use new fully equipped high-performance CNC machines. The maximum size of our blow molds is for articles up to 20 liters in volume. The maximum dimensions for our injection molds are 546 x 896mm with a maximum weight of 2,500kg. All molds made to be used in Philplast are thoroughly tested on out machines to ensure their perfect quality. Maximum weight:2500kg...

... the development of our industry at the same time. Because the greatest cost in mold production is the time of labor and engineering, we aim to shorten the time by producing practical solutions in mold systems with more efficient working principle and not compromising our quality standards or mold materials. For you, Gri Kalıp can be included in the mold making process and you can take advantage of these experiences.

... incoming mold set is selected according to the product and production type. Quality and efficiency are kept at optimum level in works that require high precision. In addition to injection molds within AYBERKSAN Plastic Mold Industry; ZPL, hot runner, blow mold, rubber press mold and insert mold are also produced. The mold designed in the CAM phase is programmed to be processed on CNC machines. At the same time, processes that require dimensional precision are reviewed. After programming, the mold is processed on the CNC machine.

... customer's wish was to produce a one-piece component to avoid welding. Deep drawing is the ideal technology for this. The size of the component required larger presses than were previously available. Therefore, we first developed tools as prototypes for larger presses on behalf of the customer. After practical tests at the customer's premises as well as at the end customer's, our client decided on a tool that was ideally suited for the production of the component in series.

...Volumetric dosing, equipped with servomotor for a homogeneous dosage. o Spun cheese dosing area. -From the control panel and by means of a touch screen we configure the speeds and accelerations of each belt to comply with the desired production. ADVANTAGES -Automated production for high volume processing. -All the processes are completed in a reduced space. -The entire line is easily disassembled for easy and effective cleaning, and its components are suitable for cleaning with pressurised water.

...Injection, injected products (from PP, LDPE, HDPE, etc. materials) – we offer the production on injection moulding machines with the clamp force of 420 – 800 t, moulded piece weight 80 – 3000 g. Our production assortment of injection-moulded products includes e.g. boxes, lids, tiles, protective plastic sides, or plastic containers. We offer the option of injection mould production including product development. Using your own moulds, any products according to specified parameters can be manufactured.

...The sand molding process offers a wide range of design options while at the same time making it cheaper and faster. With the molding we can flexibly respond to your needs and offer you the most economical solution. We can supply you parts from 0.1 KG up to 15.000 KG individual weight in the procedure forms Our Aluminum Casting Suppliers for Automotive and Aviation are IATF16949 and EN 9100 certified. Great alloy selection High flexibility Low tooling costs Low production costs​ steel casting cast iron ductile Iron casting Aluminum Sand Casting Low Pressure Casting...

...ALWA MOULD SLV is a universal two-component fast casting PU resin for mould making. It is used for the production of milling devices, negatives, product holders, foundry moulds, mould plates, copy moulds, core boxes, pattern plates, casting moulds, prototype parts, supporting moulds and synthetic cast. It consists of a beige-brown low viscosity resin component A (polyol mixture) and a red-brown...

...A qualified and experienced team that is fully involved in the projects of each and every one of our customers assists and advises you for studying your specific needs. We have the capabilities to produce moulds tailored to your specifications and unique needs. Our in-house machine shop provides crucial support, producing and optimising your production tools but also for the realization of rapid prototyping. Thanks to the expertise and commitment of its employees, Progress Silicones guarantees top manufacturing quality, competitive prices and fast response times.

... trays, pen cups and magazine racks) and sealing material (holders and heads). We also manufacture technical parts for different areas (for exemple, for refrigeration equipment, electrical panels and different telecommunication devices), with design and development thay may be either internal or external, according to the requirements of each client. We are a specialized and dynamic technical team, that combines the experience in production of plastic injection parts.

...Chloride-free accelerator in powder form for the production of concrete precast elements with very high early strength; suitable for any concrete and reinforced concrete acc. to EN 206-2; significant shortening of demoulding cycles; faster circulation of moulds; cold weather concreting. Accelerates the rate of hydration of cement; significantly increases early strength while maintaining final strength.

...We manufacture customer-specific molded parts made of rubber, silicone and elastomer composite parts in small and large series production according to your sample or drawing. Molded rubber parts are generally characterized by their good formability, chemical resistance, pressure and abrasion resistance and good electrical properties. We advise you in detail on the selection of the suitable...

...Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our...

... surfaces get not damaged. The blasting process is suitable for the removal of all solid, exposed residues, especially on metallic surfaces of production tools and high-quality machine parts. Blasting granulate and blasting pressure are adapted to the respective application. With the pressure blasting process you can clean extruder and injection moulding screws, blowing heads, moulds and profile tools much faster and more gently than with conventional cleaning methods. In extensive tests with your own workpieces you can convince yourself of the economic efficiency of our system.

...,Electrical discharging machine,Wire cutting machine,bending machine; Part surface treatment :Polishing ,Sandblast,Anodization,blacking,Powder coating,Nickle,chrome ,zinc plate ,passivation etc. Quanlity Control: Key dimension 100% inspection before shippment; At least 4 times of inspection during production. Shipping Package:MFD Wooden box free of fumigation( big weight ); Carton (small weight). As per client's demand...

... absence of glue. The machines and equipment used for the production of highly innovative stirrers (moulds treated to avoid the use of lubricants and without plastic waste; electrical injection presses without hydraulic oil and with low energy consumption) together with highly qualified personnel for accurate control of production, ensure high standards of quality, safety and hygiene of products in compliance with current industry legislation.

...LT Ultra is your partner for the production of optical surface qualities in injection mold inserts. For example, we can manufacture inserts for the injection molding of spectacle lenses with several focal lengths as well as mold inserts for microlenses or components for vehicle lighting systems. In addition to simple geometries such as spheres or aspheres, we mainly manufacture non-rotationally...

...Mifa has an extensive range of modern CNC-controlled machinery. Nevertheless, we prefer to use machining work as little as possible. Thanks to the combination of precision extrusion, CNC machining, and surface treatment, we can shorten the total production time for machining and improve the quality of the product. We write the software ourselves and make our own moulds for the CNC machining...

...Manufacturing injection moulds, blow moulds, dies ...other device and equipment Metal cnc parts production Plastic parts. Injection moulding of plastic parts. Assembling of components.

...The double bottom system and the perforation ensure both safe moulding and draining with the possibility of stacking mould on mould. The moulds can be used individually or assembled into block-moulds. Application:Moulding and draining of soft cheeses Materials:)- Injected parts made of food grade polypropylene - Available in X-ray detectable material Dimensions:Various sizes available ...

...We produce plastic and aluminum injection molds and models in our CNC machines in our group company. We can make serial production with our plastic and aluminum injections. As 3D Industry, we aim to add value to our business partners by providing the highest technologies that can meet the needs of its customers in the sector, improving production and design processes, and offering the best solutions.

... of liquid colours, flavours and acids Capable of making different shaped confectionary using different moulds Hard confectionary can be produced on the same line by changing moulds A highly automated system producing a quality product whilst reducing production and labour costs Automatic line includes:...

...Many years of our technologists' experience in the field of projects implementation and development of technologies allow us to help with our customers' obstacles. We can deal with: - technology development in injection molding plants, - we help in the preparation of a business plan and commissioning of entire production plants or injection department in plants that have previously outsourced production to an external injection molding company.

...Shot weight from 0.5 - 1000 g, in quantities from 1 – 1 million. Standard and high-performance materials (PA, ABS, PC, PBT, TPE, PEEK, PPSU, and others) Prototypes/small series/series production of plastic injection molded parts from all common thermoplastics. PA with/without GF, PP, PE, PC/ABS, ABS, PBT... High-temperature plastics - PEEK, PPA, PPS... Cable overmolding Metal-plastic connections...

...Metal die casting – is a production technology of castings, in which the alloy under pressure up to 700 MPa quickly fills the mold. Products made in this way can be of different sizes and have weigh up to several kilograms. As a basic raw material normally are used following: non-ferrous metals — copper, aluminum, and their alloys. Die casting makes it possible to obtain high-precision products...

...Our in-house Tooling department handles both mechanical design and the construction of molds, as well as automatic assembly machines and innovative projects. PROGRESSIVE AND BLOCK MOLDS We have extensive experience in the field of molds: from design to production and on to both routine and extraordinary maintenance, which we offer free of charge for the entire product lifespan, which can last up to 35/40 years. This excellence and quality allow our clients to overcome the concerns associated with investing in a new mold.

...OVERVIEW OF THE PRODUCTS...

...Services on injection moulding machines - We provide injection moulding services using both moulds made in our tool shop and those supplied by clients. We execute both short and long production runs, and we have modern and efficient Arburg injection moulding machines with a clamping force of up to 130 tons. The machines are equipped with dryers, conveyor belts, and manipulators, ensuring that the quality of the items we produce is of a high standard.

...Continuous electric induction system furnace straight type for the production of gold or silver bullion in controlled atmosphere, suitable for the working with graphite ingot moulds. ADVANTAGES OF FLAMESS TUNNEL Significant reduction of rejects due to increased quality of the bars Better for the environment (Green technology) Cancellation of precious metal losses (loss of weight: 0,01...

...WE PRODUCE SOLUTIONS TO YOUR PROJECTS BY MANUFACTURING PLASTIC BLOW MOLDS IN ALL SECTORS. WE ALSO MANUFACTURE MOLDS FOR BURR-FREE PRODUCTION IN THE AUTOMOTIVE INDUSTRY ACCORDING TO 3-D BLOWING TECHNOLOGY. WE ARE THE ONLY COMPANY DOING THIS IN TURKEY. YOU CAN VISIT OUR WEBSITE, CONTACT US. REFERENCE AND INFORMATION YOU NEED WILL BE SHIPPED TO YOU THROUGH E-MAIL.