institute

...A blend of fine Arabica and Robusta coffees, artisanally roasted and then blended. Gold Medal at the International Coffee Tasting 2018 by IIAC (International Institute of Coffee Tasters) in the "Italian Espresso" category. Gold Medal at the Mediterranean Taste Awards 2022 - Excellent Taste.

...STEEC is an approved company for the research tax credit and as such partners with numerous renowned research institutions such as the French National Center for Scientific Research, CNRS, or the French Research Institute for Nuclear Energy and Alternative Energies, CEA, and often collaborates with university research institutes both within and outside of France. STEEC supports researchers in their activities and provides them with the opportunity to access cutting-edge micro-machining technologies such as micro laser cutting or micro drilling through spark erosion.

... of DIBt Berlin (German Institute for Structural Engineering) Welded plastic construction made of sheet material, dimensioned according to static requirements Base area with removable PE perforated plates Integrated filling area in the front basin section 100 mm ground clearance due to foot construction, accessible from below Lockable with a padlock (not included in delivery) Material: PE-HD...

... smooth, exterior fabric patterned Suitable for CIP and conventional cleaning, brief steam cleaning up to 130°C All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). Supplied by the roll or cut to length. Also available without spiral or in reinforced version to transport abrasive foodstuffs. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

...The packaging, storage and transport of hazardous materials are subject to stringent safety requirements. To meet these criteria and the specific safety requirements that apply in these industries/sectors, Gmöhling has also developed hazardous goods packaging and added it to its already extensive product range. GMÖHLING hazardous goods packaging (ADR) has been licensed by the Federal Institute...

...HIAT develops and produces catalyst-coated membranes (CCMs) for use in PEM water electrolyzers, utilizing commercially available electrocatalysts and membranes. The institute has extensive experience in the composition and structure of electrolysis electrodes, carriers (gas diffusion layers), and membranes. Furthermore, HIAT has patented a novel platinum-free cathode for PEM water electrolysis...

... special segment design allows for precise cutouts for electrical connections and sensor inputs. High quality and durability are ensured by the exclusive use of tested materials. The REX insulation jackets have been tested by a neutral institute, the Plastics Center in Leipzig, for their functionality regarding heating energy savings. In tests with injection molding machines, heating energy savings of up to 50% were determined, depending on the polymer.

<p>MALVIN is today one of the most important players in the field of materials and technologies for construction, boasting over 40 years of experience. Over the years, it has adapted to a constantly evolving market and aims to achieve the highest quality standards by creating quality products with guaranteed performance. MALVIN is now alongside designers, retailers, and applicators with a range of...

...for the food sector (for direct contact with food) for non-food products Compliance with restrictive norms concerning products that come in contact with food, most recognized certificate in the industry – BRC/IoP (British Retail Consortium and Institute of Packaging)...

...Our MITRA solar absorber is a product designed for the highest standards, which was recognized as the test winner in a unique absorber comparison test conducted by the renowned "Institute for Solar Energy Research (ISFH)" with an efficiency of 91.8% Eta. Through pioneering spirit and inventiveness, we were able to tap into a market that did not exist until then! As early as 1979, we received...

... tensioned – without prior disassembly. Construction The pressure plates are equipped with a circumferential wedge edge that presses into the elastomer ring when the screws are tightened; thus, the clamping force is directly transferred to the sealing ring, preventing lateral slipping or bulging of the rubber under the pressing elements. Testing The Lu-SW house entry has been tested and certified for pressure tightness up to 3.0 bar by the Material Testing Institute Leipzig.

...Rescue Container The rescue container has been specifically designed for the safe transport of damaged or defective goods, as well as FIBCs that do not meet the requirements of a hazardous goods container. Product Description A robust outer packaging for critical goods whose packaging does not allow for safe transport: Rescue containers have been approved by the Federal Institute for Materials...

... and experienced representatives, keen eyed and able to ensure the smooth delivery of your goods via air, road and sea with a service that's second to none. We recognise that in a post-Brexit world, many forwarders aren't aware of the regular changes in legislation and this can result in shipment delays for their customers. We are members of both the Chartered Institute of Logistics and Transport and The Institute of Export and International Trade, so we are regularly updated with these legislative changes and can ensure smooth delivery of your goods. ...

...International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std...

... 260 has been verified by the DVGW testing institute at the Gas and Heat Institute in Essen. Liquid::for gases and liquids Technology::float Additional features::glass tube; series Operating temperature:-20...+100°C / -4...+212°F Pressure:7/10 bar (depending on DN) Measuring range (liquids):0.4 to 10,000 l/h (water: 20°C) Measuring range (gas):7 to 310,000 l/h (air: 20°C, 1.013 bar)...

... life by our design specialist. Our surveyor can also carry out a home visit, where we will measure the room, making sure to use all available space. After that it’s over to our directly employed fitters are on hand to turn your design into a reality. All our fitters are registered with the Institute of Kitchen, Bedroom, and Bathroom Installers (IKBBI). We have a range of options to suit most tastes and budgets. For your peace of mind, up to 7 years warranty is available on the installation.

...Nu-HydraFoam is a skin-friendly foam soap that leaves a pleasant feeling of freshness and clean skin. Additionally, it has a positive effect on the skin microbiome, which represents the natural protection of the skin. It is made from gentle cleansing agents, natural moisturizers, emollients, and fermentation extracts. This non-irritating formula protects the skin from pathogenic invasion and helps maintain the integrity of the epidermis. Nu-HydraFoam has been rated "very good" by the Dermatest Institute.

... Permeation- hermetic Tear resistance -level 4 Cutting resistance- level 1 Rend resistance- level 4 Prick resistance- level 1 The gloves comply with the 3rd category of individual protection items. The gloves comply with harmonized PN-EN 374-1:2005 standards Gloves protect against chemicals and microbes according to PN-EN 388:2006 standards Protection against mechanical threats, confirmed by researches carried out by CIOP-PIB The gloves are certified by the Polish Health Quality Institute (PZH), which allow to use them in food contact industry and for household applications.

We see ourselves as a service company for the entire field of electroplating. Our customers include both electroplating companies and businesses from other industries that are seeking contacts in this sector or require professional support on this topic. As a service company for the entire field of electroplating, we offer you a comprehensive range of electroplating chemicals and supplies in our...

The company KLAUS GROSS KG is a service and service provider for the oil and gas supplier industry as well as the metal and machine engineering sector. Furthermore, customers from the aerospace, power plant construction, and arms industry are among our clients. The company premises in Westercelle cover an area of 7,500 m2, of which 3,500 m2 are developed as production space and 500 m2 as office s...

In the late 1980s, the industry expressed a desire for an independent and competent contact regarding surface technology issues. This call did not go unheard, and in 1993, IGOS was founded. Today, IGOS is the neutral contact for companies operating in the fields of coating technology, surface technology, and electroplating. The Beteiligungsgesellschaft Stadt Solingen mbH, a 100% subsidiary of the ...

Hello. We are Qualitech. An accredited testing center, leading in the areas of Non-Destructive Testing (NDT) Destructive Testing (MTP) Damage and Material Analysis Industrial Computed Tomography Welding Competence Center as well as Measurement Technology and Calibration We also apply our know-how and expertise for approvals and inspections and are passionately committed to seminars and t...

Metal templates, parts made of metal foil and plastic, Precision parts, laser ablation, laser processing, Hybrid material, Piva Hybrid, polyimide parts, seals, Shields, laser drilling, contour cutting, clamping systems...

As an accredited testing laboratory, we assess the durability of your products under real and extreme conditions according to generally accepted standards or your individual specifications. Every product is exposed to a variety of environmental influences throughout its lifespan. Temperature, humidity, vibrations, and pressure affect the function, lifespan, quality, and reliability of your produc...

CEWUS Chemnitzer Werkstoff- und Oberflächentechnik GmbH Your partner for - Material testing - Metallography - Material investigations - Non-destructive testing (UT, RT/DR, MT, PT, VT, ET) - Damage analysis - Wear testing - Consulting - Research - Training...

The company WPW Werkstoff-Prüfung-Wieczorek is an independent and accredited testing laboratory. Our area of expertise includes the execution of destructive and non-destructive material tests, damage investigations, as well as material and component inspections. We have many years of experience in the fields of rolled and forged products, accessories and materials for pressure equipment and power ...

Founded in 1987, the company has developed over time into one of the leading medium-sized testing companies in Germany. The testers, technicians, and engineers at PELZ draw on more than 25 years of experience in testing services, with a focus on continuous improvement of processes, training, and the promotion of young talent. The company is accredited according to DIN EN ISO/IEC 17025:2005 and c...

...dynamic 1250 kg, in high rack 1000 kg Color: light gray Skids: 3, welded Outer edges: 7 mm Central locking: Yes — GS1 certified, universally exchangeable across Europe, with "GS mark for tested safety", certified according to DIN 55423-5 and 55423-6 — Basis for standardized box systems, compatible with the H2 half pallet and the E-box (E1-E3) — Dortmund Fraunhofer Institute confirms a lifespan of over 12 years — Double-sided approach ramps on all skids enable optimal use with forklifts...

... company, we are by profession road transport engineers and a member of Institute of Road Transport Engineers (IRTE) Warehousing and Distribution BECO GLOBAL specialise in the handling of commodities, export and import compliance, secure storage, collection, packaging and affordable distribution of products to final destinations throughout the UK with warehouses servicing the UK mainland. This allows us to offer flexible and bespoke freight handling solutions and services within the shipping industry.

Jiangsu SIXIN, the professional defoamer manufacturer, specializes in antifoam/defoamer over 30 years and only focus on foam inhibitor. Our range includes over 100 varieties of foam control agents, both silicon and non-silicon, covering organosilicon to non-organosilicon, water-soluble to oil-soluble, and solid to liquid formulations, widely used in various industries. As the largest antifoam a...