industrial cooling plants

...Our assortment includes the following ranges: -Display freezers with curved and flat glass sliding lids; -Display freezers of bonnet type; -Chest freezers with solid doors; -Scooping freezers for gelato; -Freezing and cooling upright cabinets with glass and solid door; -Gastronomic refrigerated showcases; -Pastry counters. ...

...The PMM series consists of large industrial cooling towers for power generation, steel and aluminum processing, cogeneration, and other large-scale production sites. They guarantee efficiency and high performance, with reduced installation and transportation costs. Modularity and easy transport: Pre-assembled components at the factory, a large facility. Reduced installation time and costs on-site: Although they are part of large industrial cooling systems, the PMM units can be installed in a timely manner. High efficiency: Thanks to evaporative technology and multiple axial fans.

...The commercial air coolers series from Kelvion is designed for most cooling applications, both in the storage and distribution of products. Information regarding commercial coolers is described in catalogs, device selection software, and product configurators. In addition to pre-defined variants, there is also the option to choose additional options and accessories that meet customer requirements.

...Industrial transformers from Faber E-TEC are designed to meet the high demands of industrial applications. They ensure a constant and stable power supply, even in challenging environments. With advanced cooling and protection mechanisms, they are ideally suited for manufacturing plants, refineries, and other industrial sites.

... to your needs, we supply rack units with a wide selection of optional components, either electrically pre-wired or with a switch cabinet. We also offer the ideal control system tailored to each individual application. This system is primarily used for cold storage plants with more than three rooms. Technical Specification It features semi-hermetic, scroll, or screw type compressors. Manufactured with air-cooled or water-cooled condensers. All equipment is delivered along with control instruments, ready for assembly.

...Explosion-proof cooling units Onshore & offshore oil platforms, refineries, nuclear power plants, and similar energy facilities require the highest level of safety. For such applications, flame resistance is a must, and all materials must be explosion-proof. All our ATEX products are delivered with certification, according to the specified serial numbers and classifications. All tests are...

...The ASCO CO2 Gas Purity Tester has been designed to measure the purity of CO2 up to 99.995 % in a quick, easy and reliable way. Essential for bottling plants, breweries, beverage manufacturers and industrial gas companies. The complete kit contains all equipment for a simple, safe and fast CO2 gas purity test and is complete with easy instructions (step by step pictures on a laminated A3 sheet...

...Energy systems for industrial plants can sometimes be costly in operation. Therefore, we pay attention to economically favorable solutions right from the planning and design stages. Our heating and cooling systems are tailored, individual solutions for seasonal and user-specific requirements.

...Our main activities: - Sale of commercial shop equipment and - Sale of commercial cold rooms - Sale of Refrigerated Display Counters - Sale of commercial Bain marine counter displays - Sale of Refrigerated Counter Display Case for Bakery - Installation of commercial refrigeration equipment - After sale service refrigeration & restaurant equipment We offer reliable commercial...

...The secret of this system is the combination of the refrigeration section and the free-cooling section depending on the time of day and year: the first mode allowed by these liquid chillers takes advantage of the normal operation of a refrigeration circuit, the second allows cold outside air to be directly conveyed to the fluid to be cooled: maximum efficiency, minimum energy use due to the clear separation between the two sections. Temperature Range:from 10°C up to 25°C Outdoor temperatures:up to 40°C...

...Every industrial production requires energy in order to make products. Often, electrical or primary energy is induced as heat, used for operation and must then be dissipated, converted or destroyed. Our gwk process engineers analyse and calculate production processes and the overall thermal periphery with the objective of lowering the necessary energy by means of energy recycling, of reducing...

... Plants - Cooling for Paint Production Facilities - Cooling for CNC Machines - Cooling for Foundry Furnaces - Cooling for Extruder Machines - Cooling for Anodizing Coating - Cooling for Film Extruder Machines - Cooling for Flexo Printing Machines - Cooling for Galvanic Coating - Cooling for Food Filling Machines - Cooling for Heat Treatment Machines - Cooling for Cataphoresis Coating - Cooling for...

...in all versions, e.g. with double jacket or welded half-pipe coil, for heating and cooling, volume from 450 to 50,000 liters.

...Combined Filter Drier and Liquid Receiver is an unit which hold Filter Drier and Liquid Receiver within a single body and performs as both at the same time. Having of the innovative design, the unit saves a great space. The function of the liquid receiver is to send the refrigerant fluid in 100% liquid state to the expansion valve for the best cooling effect. These series are produced for...

... cooling towers and silos to offshore plants and explosion-protected areas. Industrial elevators create huge time and cost savings due to efficient workflows in maintenance and service work. The GEDA Standard elevator range covers load capacities from 400 to 3,200 kg. The modular design also provides the customer with the choice of different car dimensions and hoisting speeds of up to 60 m/min...

...CO2 Industrial is a customizable transcritical rack, designed mainly for industrial application. Special “reach-in” container option for outdoor installation provides convenient and efficient unit service. This type can be assembled with maximum of 6 reciprocating compressors per stage (MT/LT) and provide cooling capacity ranging from 50 kW to 500 kW. This model is assembled with 6-cylinder...

...Industrial cooling devices are high-capacity cooling units. They are produced in 32 different models as cold and frozen storage, ranging from 2670 to 86000 Watts. Typically, semi-hermetic compressors are used in industrial devices, along with evaporators (indoor units) according to the capacity of the device. Due to their high capacity, industrial cooling devices are primarily needed in cold storage facilities and production plants. Thanks to their specially designed casing and high-quality equipment, the noise level has been minimized.

... filtration of civil and industrial waste water, clarification of metallurgical industry cooling water, algae removal, pre-treatment for ultra-filtration membrane installations, pre-treatment for ozonisation plants, finishing treatment with active carbon. - Low first costs and plant management costs - High efficiency and reliability for the removal of suspended solids, even colloidal - Exclusive backwash system which uses raw water rather then filtered water - External sand recirculation system - Ease of installation Possibility of gravity feed, thanks to its low pressure drops...

...Chiller which has a very wide use area and especially preferred for concrete cooling offers direct use in concrete plants as container and modular according to ISO 9001: 2008 Quality Management System. The advantage of fully automatic operation is that it reduces the water by 10 degrees and provides full-time use.

...Evaporative towers are used in industrial process cooling. Wherever there is a need to cool a large flow of water, evaporative towers W-tech are your best solution for: - Energy production plants and cogeneration - Metallurgical plants - Chemical-pharmaceutical plants - Food plants and concentration - Industrial plants in general/air conditioning and refrigeration - Plants for moulding, plastic...

...Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for...

...Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material: AL, seawater-proof - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar) Attachment:screw-in Configuration:straight Applications:Compressed air, cooling water, vacuum Material:aluminum, seawater-proof Other characteristics:chambered O-ring, seal FKM...

...Refrigeration Systems, Cooling Units, Cold Storage Refrigeration, Condensing Unit, Evaporator, Compressor Rack...

...semihermetic varieties of central system are available. Semihermetic or screw compressors are used in the central system for the center of industrial plants with high cooling capacity. Hermetic and scroll compressors are used to lower capacity the projects. Leakage tests of outdoor unit are performed by pressing nitrogen. Electrical panel and all automatic control elements are shipped as ready for assembly. It is manufactured in accordance with European Union norms and CE certificate. ...

...We design and deliver comprehensive solutions aimed at effective recovery, re-utilization, and reduction of energy consumption generated in industrial plants. "White Certificates" An effective modernization process means reducing the amount of saved final energy and serves to improve energy efficiency, which allows for confirmation through so-called "white certificates". These are issued, based...

...Electrical Surface Heating that brings heat to cold areas – for cold storage and cooling chambers as well as industrial plants and open spaces.

... drinking water but also of utility water and process water in industrial applications. Typical applications include: • Disinfection of drinking water, e.g., in residential and hotel facilities • Treatment of process water in the industry, e.g., in the beverage sector (CIP systems) or washing systems • Disinfection of water in humidifiers, air conditioning systems, or cooling systems • Germ reduction in cooling water circuits, e.g., in open cooling towers, cooling plants, or air conditioning systems • Sustainable disinfection of swimming pool water • Wastewater treatment in...

... as EN 62368-1 and EN 61558-2-16 make the HDR-100 a competitive power supply for all types of applications in the fields of smart home, home automation, industrial plants, and audio/video applications. Highlights - Wide input voltage range - High energy efficiency - Low no-load power consumption - Adjustable output voltage ±10% - Overvoltage category OVP III - Ambient temperature: -30 °C to 70 °C...

...UNIVERSAL TUBES & PIPES / GENERAL TUBES & PIPES (GTP). These tubes and pipes for general applications are used as pipeline elements in a variety of industries. BOILER TUBES. Boiler tubes are used in thermal energy applications as part of the piping components in power plants and industrial facilities. INSTRUMENTATION TUBING (IT). Precision tubing made from stainless steel. HEAT EXCHANGER...

...DSU B.V. was founded in 1970 in The Netherlands as a specialist in made-to-measure refrigerator door seals for commercial refrigeration equipment. Today we are Europe’s leading producer of customized refrigerator door seals. We produce OEM compatible door seals for all main refrigerator, freezer and cold room manufacturer brands. We supply to refrigeration equipment manufacturers, catering...