heating systems - external

...-quality products is the most important factor for years of trouble-free use. Aldea underfloor heating styrofoam is made of high quality material and will perform its heating function without any problems for many years when applied according to the rules. Styrofoam is produced in different densities to meet different needs, depending on factors such as the insulation status of the area to be used, ground structure, and external temperature measurements.

...InduStrip IHS heat radiators are suitable for full or supplementary heating of large volume spaces with high ceilings. These radiators can also be used outdoors, for example, on sports stands or loading ramps, to keep them dry and frost-free. Robust industrial design, stainless housing (galvanized), high-gloss aluminum reflectors. Optimal mounting height up to 5.5m. 3-stage switchable via external switch. Power: 3000W - 6000W Voltage: 400V 3N Protection class: IP44 Housing: Galvanized steel Mounting: Wall / Ceiling...

... directing the warm air into the room to be heated. The main advantages over other heating systems are: - Reduced acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct, or a duct network can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

... well as a highly powerful axial fan. The compact construction consists of a robust, epoxy-coated steel frame with a double-walled housing for optimal sound insulation and thermal insulation. Due to its functional design, the oil heater blower IDS 900 is delivered without an integrated fuel tank, which is why the use of an external tank is recommended for automatic continuous heating. Alternatively, a base oil tank with a capacity of 208 liters is also available.

...This fully automatic drying system uses a blower to draw in ambient air and pass it through the heating element. The fully automatic drying system uses a blower to draw in ambient air and pass it through the heating element. The hot air, exceeding 200°C, regenerates the moisture within the adsorbent bed and removes any moisture. The advanced control system monitors the dew point and adjusts the heating/regeneration accordingly, resulting in significant energy savings.

...Four a sole fixe foyer maçonné 12 bouches Mondial Forni Model: Mondial Foyer maçonné 12 bouches / 4 étages Chamber dimensions: 1860x1380mm External dimensions: 2520x2690x2300mm Cooking surface: 10.3 m² Usable heights: 190x190x190x250mm Heating power: 102Kw / 88000 Kcal/h Electrical power: 1.5 kW / 400 V Weight: 8100 kg Burner position: at the bottom Fuel systems: Methane, LPG, Diesel, Wood Optional burner...

... external wall installation. A thermal insulation layer made of 34mm mineral wool between the inner and outer shells provides the necessary thermal insulation, placing it in thermal resistance group II a. Even under significant temperature fluctuations, the System III FU remains insensitive to expansion and contraction. The system is manufactured in a diameter range of 80 mm to 600 mm and quickly...

... steel flue for fire safety and a special heating boiler for increased demands. The integrated dual-fuel burner is capable of burning both oil and gas. With the installed tank heater, the internal safety oil tank system is maintained at temperature. This ensures reliable operation with heating oil under all temperature conditions and guarantees a smooth process. If the existing tank volume is insufficient, external oil tank systems can be connected.

... with loading grid for effortless handling of parts, agitation system to separate dirt, exclusive OPS oil decantation system, intuitive touchscreen panel, and much more. Robust construction with high thicknesses and AISI 304/316 stainless steel. Available from 150L to 7500L to meet the needs of every sector. External dimensions of the machine: 2,700x1,955x2,265 mm Internal dimensions of the...

...Bridge thermostats are suitable for controlling the temperature of any bath. External systems can also be controlled using rotational speed controlled pressure-suction pumps with VPC technology. Models with a larger heat output are suitable for larger bath volumes. The telescopic arm can be pulled out to a length of a maximum of 884 millimetres. The new multi-touch controller Pilot ONE offers a...

...Small Silo – Maximum Comfort Even Without a Pellet Tanker With the newcomer in the Flexilo® range, storing wood pellets has never been easier. The Flexilo® MINI is ideal for locations that cannot be accessed by pellet tankers or for heating systems with only a low demand. The compact fabric silo holds 600 liters of pellets and has dimensions of 98 x 98 cm. The silo is 122 cm high and is open at...

... line systems made from different materials, such as rubber-metal connections, can be treated both internally and externally. The flexible system technology with many adjustment options ensures effective cleaning and testing of a wide range of components. - Internal and external cleaning - Flushing with directional change - Pulsing - Blowing out - Flow testing - Pressure testing - Vacuum drying - Heating up - Applying corrosion protection...

...Systems tailored to customer specifications for lubrication oil supply to rolling bearing points, redundant pumps and filters, with tank heating according to ATEX, level control switch, and connections for external manometer. We manufacture lubrication oil systems according to individual customer requirements. They meet high standards of reliability and durability for use in gearbox and drive...

...Our front-mounted shutters perfectly insulate heat. They serve as a barrier against unwanted guests and, after being partially lowered, effectively protect the interiors from excessive solar radiation and heating. In all the projecting shutter systems we offer, there are also versions with mosquito nets, which protect us from intrusive insects, especially during the summer months. Roll-up mosquito nets are available for all models.

...Installation of supply and exhaust of smoke protection ventilation systems. Installation of heating systems, ITP and boiler rooms. Installation of water supply and sewerage. Electrical installation works.

... levels. With a matching frame The product range gives you complete freedom of choice: multi-stage or 0 – 100 % EC fans, 2-pipe or 4-pipe systems, five different sizes and more. Everything under control The chilled water cassette comes complete with the fully automatic KaControl. Or you connect it to an existing external BMS. Heating:LPHW Cooling:CHW Installation:ceiling-mounted Heat...

... remotely. Provides good airflow over long distances. Suitable for commercial use in both indoor and outdoor applications. Ideal for temporary heating on both a large scale and localized. Can be used with an external thermostat to save fuel. Can be utilized for climate control applications, as well as for industrial or construction purposes, wherever warm air is needed. AIRFLOW DESIGN: 11250 m³/h CONNECTIONS: 32 A 5 pins POWER SUPPLY: 380/415 V 3 p N+E 50 Hz HEIGHT (M): 1.60 LENGTH (M): 2.90 WIDTH (M): 1.23 WEIGHT (KG): 1475 (wet)...

...unitized facades, and ventilated facades, which offer different advantages in terms of thermal insulation, acoustic performance, and energy savings. These systems are widely used in commercial buildings, offices, skyscrapers, and public structures due to their versatility, durability, and ability to improve energy efficiency. Continuous facades can include tempered or laminated glass for added safety, solar control glass to reduce internal heating, and photovoltaic modules for solar energy integration, contributing to sustainable and cutting-edge architecture.

...Powrmatic CPx 360kW Gas Fired Cabinet. Upright. Horizontal and External Cabinet Heaters also available...

... internal and external threads - Bracket for the walkway Bottom - When fully drained, stainless steel ball valve Ø 50. - Feet with adjustment screws and plates - Cooling circuit on the bottom of the tank. Shell - Door 410 x 530 stainless steel, opens outward. - When clear discharge, stainless steel ball valve Ø 50. - Tasting valve made of stainless steel - 2 stainless steel coils inside - 6 turns of the shell-shaped circuit - 1 level with return to the chimney. DIMENSIONS - Diameter: 2785 mm - Overall height: approximately 4500 mm...

... water, saturated steam, water-glycol mixture, compressed air. Application: heating systems, compressed air systems, and air conditioning, chemical industry, process engineering. Durability ensured by a spindle with a self-adjusting packing.

... Hotel: It is designed to be integrated into pool heating systems. Home: Designed to be integrated into residential plumbing systems. Greenhouse: It is designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

...Technical features: forced ventilation and cooling system for warehouse Autonomous ventilation and air supply units complete with: - external air louver section - supply air fan section for ventilation - section prepared for post-heating expansion - filtering section - special version with ATEX components for explosion-risk areas - power and electronic control panel - digital central unit for...

...To meet the various requirements for drying results, different drying methods are possible depending on the cleaning item. In combination with the available cycle time, the integration of external dryers is advisable: recirculating air drying, hot air drying, compressed air impulse blowing systems, vacuum drying, heating systems, and heat tunnels.

...Stainless steel heating circuit distributor, with integrated regulating insert in the supply and thermostat inserts in the return, G3/4 Euro cone external thread, including galvanized wall bracket and draining set Operating pressure: Max. 4.0 bar Operating temperature: -10 °C - 80 °C...

... and heating performance of the proven premium series advanced. The protemp selection temperature control unit is particularly suitable for the supply of multi-circuit water distributors and is designed for the display of up to 6 external proflow temperature control channels. Use:cooling,heating Other characteristics:automatic...

...Introducing the Mobile Pipe Decoiler PD-200, your solution for efficient coil uncoiling tasks. With its rapid folding and unfolding feature, this equipment optimizes workflow for a variety of applications. Capable of handling coils weighing up to 80 kg, with a maximum height of 600 mm and an external diameter of up to 900 mm, it offers versatility for different coil sizes. Its internal...

... Accessories and other systems are installed regarding individual agreement. The recommended temperature for use is 36/37 degrees (Celsius). Massage, lighting, etc. adjustment buttons are being installed in the tub wall. External dimensions: 200x200cm...

...When choosing a stove for a hot tub, it is necessary to consider the size of the latter. External stove 45 kW MATEA is suitable for hot tubs with a diameter of 2 meters or more. The stove runs on wood; dry birch wood must be used. The stove is connected to the hot tub with heat-resistant hoses that are included in the kit. Advantages of external stove MATEA 45 kW The furnace is made of...

...General Purpose Wet Sandblasting Machine External Dimensions: 800 mm x 1450 mm x 1800 mm (h) Internal Dimensions of the Sandblasting Cabinet: 770 mm x 800 mm x 700 mm (h) Sandblasting System: Manual Processing Capacity: 3-4 m2/hour Number and Diameter of Rotary Tables: Optional Transport Cart Movement System: Optional Loading Lid System: Manual Number of Nozzles: 1 Piece Washing Pool: Optional Water Heating System: Optional Sand Discharge System: Optional...