grp parts

... adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight allows an easy handling. ((Infotexte)) Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air expanding in the air engine cools the agitator drive. The pneumatic agitators are explosion proof and overload proof until standstill. Type test certificate for explosive zone 0. The GRP is a pneumatic agitator...

... AMB (antimicrobial) Glass Reinforced Plastic, painted sheet or stainless surface EPDM rubber based gasket system Seamless surface in the use of 1.5 mm AMB (antimicrobial) GRP The desired color option on the door leaf Door leaf and frame, anodized aluminum that prevents heat transfer Door leaf, 42 kg / m³ density high pressure polyurethane injection 220 volt, 25 w / m silicon based resistance in frozen storage doors Aluminum profile with resistance on the floor 80-92 mm Leaf thickness for mid temperature cold rooms 120-150 mm Leaf thickness for freezer room and blast freezer rooms...

...AUTOSOL® MARINE METAL POLISH Highly abrasive cleaning, polishing and grinding agent for weathered boat surfaces. It maintains and derusts all bare metal parts on the boat, e.g. fittings and GRP surfaces. Even stubborn stains are removed completely. The product delays re-tarnishing and corrosion. Item number:01 001190...

KEIM KUNSTSTOFFTECHNIK GmbH specializes in the production of products made from fiber-reinforced plastics (thermosets) using Resin Transfer Moulding (RTM) and hand laminating. The modern composite technology offers alternatives to conventional materials. An important argument for lightweight construction is the weight savings in the components. This contributes to reduced consumption and CO2 minim...

...connectors). Consolidation and repair of works subjected to environmental, dynamic, hydraulic stresses, such as tunnels, hydraulic, marine, underground works, industrial buildings. Application surfaces should be clean, free of dirt, crumbling and non-adhering parts, dust etc., and saturated with water "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting...

... plastic, which we process in our CNCcontrolled milling machines to produce precisioncut parts for e.g. wheel arches, indicators and maintenance covers. We can also install reinforcements or addon parts at the same time if required.

...CIG Piping Technology manufactures pressure vessels tailored to customer specifications from metallic materials and FRP/GRP. • Challenging specifications • Precisely processed • Measured and documented • Surface treatment Let our pressure vessels inspire you: Would you like more information about our pressure vessels? CIG Piping Technology is happy to explain the possibilities for your shipbuilding or industrial project. Simply get in touch via email at info@cig-pt.com or by phone at +49 (0)421 620062-0.

...GRP cable ladders for heavy industry, power plants, oil platforms, LNG terminals, pump stations, and refineries.

...Slot Closures: Polyester, DMD, Nomex ®/Mylar ®/Nomex ® (NMN) Slot Wedges: Wood or Glassfibre reinforced polyester (GRP) Moulded insulating parts: Slot insulations, slot closures, inter phase insulations, coil insulations, etc.

...GRP structural components for rotor blades Gone with the wind... Rotor blades of wind turbines are now too large to be transported over roads to construction sites. They are therefore manufactured in two parts and assembled at the construction site. The internal structural component is manufactured by IBK-Fibertec by means of a winding process. This is the inside blade of an E115 by Enercon: www.enercon.de www.wind-turbine-models.com...

...Plastic Air-Air Heat Exchanger hdt WT 3000 TK 50 for 5,000 - 7,500 m³/h Plastic Air-Air Heat Exchanger WT 3000 TK 50 Color light gray, weight approx. 129 kg, heating capacity max. 25 kW at Delta T = 30° C Housing made of sandwich panels from extruder with double-sided coating of 1mm GRP, impact-resistant, inspection openings with stainless steel holder and latch, corners with stainless steel...

... fiber-reinforced plastics are used in various industries and can be used to manufacture both small components and large structures Offer STOLAM, a company with 40 years of experience, specializes in the production of high-quality plastic components using hand lay-up processes. Our team consists of skilled professionals who can tackle even the most challenging manufacturing demands. By partnering with us, customers can rely on professional advice and technical support at every phase of their projects. We offer a range of products to our customers, including body parts and interior...

...Composite GRP gratings have unique properties that do not have any metal materials. They are used in environments where there is increased humidity, aggressive environments, and where increased material life requirements are imposed. Composite materials are maintenance-free, which means that you mount them once and do not have to incur additional maintenance costs such as coating and many other tasks you perform on metallic materials.

... individual cuts, rolls, rollers or wheels with or without coating. Furthermore finished parts, such as protective systems for safety at the workplace in electronic applications. We process all types of plastic, from polyamide to hard PVC through to GRP/FRP. Semi-finished parts: Plates, Blocks, Full rods, Hollow rods, Pipes, Cut pieces Finished parts Cut and processed (turned, milled, drilled etc.) to drawing, sketch or sample, such as - Wheels, Rollers, Bearing bushes, Thrust rings, Bands, Sleeves, Strips ...

... the processing table, the height of the portal clearance, and a generous portfolio of spindles allow for optimal configuration for you! Material to be processed: Aluminum, plastics, wood, composites, CFRP, GRP Size of processing table: from 2000mm to 8000mm...

... can be disassembled Fretting of the threads is practically impossible Technical parameters Temperature: t = -240 … +260 °C Pressure: p = Vacuum up to +170 bar pH 0 - 14 Physical properties Color: bright yellow Thickness: 0.1 mm Area weight: 125 g/m Classification: GRp Tension strength: 9 - 14 MPa Nominal width: 10 < DN < 50 Main application For sealing all kind of thread connections as per ISO 7-1, classification GRp, with possibility of limited reverse rotation of conical/cylindrical (R/Rp) threaded connections Pipe connections in...

... toughness, and it has excellent resistance to environmental influences and chemicals. The adhesive is used for bonding metal, electronic components, GRP components, and a variety of other parts in applications where higher temperature values than normal or more demanding environmental conditions are present. Profile: ARALDITE Designation 2014-2 Chemical basis, mixing ratio 2K EP 2:1 Color gray Viscosity (processing) thixotropic Processing time for 100g at 23°C 110min Typical Tg EAN:4260534181613 kg:2...

... profile or CFRP/GRP • Cutting out a test piece for analysis of a specific area e.g. circuit boards, electronic components • Production of test bars for tensile testing (also CFRP) • Production of sections for material examination...

...stainless steel, high-alloy chrome-nickel steel, titanium, brass, copper, plastics, composite materials and fiber-reinforced plastics (GRP, CFRP), stone, ceramics, glass, rigid foam, insulation and insulating materials, wood, rubber, hard fabrics, and much more.

...PI2 is experienced in design, manufacturing and installation of sliding tank covers for all industrial sectors tough a water treatment plant is where they are placed the most. Covers are made in GRP, reinforced polyester by fiberglass. This composite material adds many benefits to the tank covers as light weigth and resistance. Our tank covers are customised and produced by the specific...

...We specialise in the design, manufacture, supply and delivery of Glass reinforced polymer (GRP / FRP) and composite products alongside niche carbon steel, stainless steel and aluminium metalwork activities. We are able to provide the delivery of full projects, or more specialised parts of a larger project. We can provide various GRP and metalwork products, including but not limited to: open...

GRP Moulders, along with the other key parts of the whole fibreglass manufacturing process such as mould-making and patternmaking (Development Work) still make up a substantial part of the UK manufacturing scene. Ideally suited to low and medium volumes of production work, GRP mouldings are used extensively for products where practicality of use, accuracy of fitting and repetition of identical components is just not viable in other materials – usually due to limitations of the material itself or financial constraints. Fibreglass products are all around us!

...and even as false ceilings. The advantages of glass fiber reinforced plastic include: ● High mechanical strength ● Corrosion resistant ● Low specific weight ● Easy and quick to assemble ● Chemical resistant ● Long lifespan with minimal maintenance ● Electrical and thermal insulation ● Application temperature range: -100 °C to +180 °C. According to customer requirements, we supply machined and pre-assembled GRP profiles, sheets, and walkways, whether in smaller or larger quantities.

... machining techniques, we can also produce thermoplastic plastic parts in small quantities. Resistant to environmental influences, alkalis, acids, and other aggressive media - fiberglass-reinforced plastic processing (GRP) is best suited for this purpose. Our production program includes: - Duroplastic processing - GRP parts in hand lamination - Vacuum injection and cold pressing processes...

... manufacturing, the medical industry, the electrical sector, and the sanitary industry. GRP components at the boundary of conventional materials Composite materials often meet specific requirements (stability, shaping, weight, fire protection) that lie at the edge of the potential of conventional materials (such as steel, aluminum, or wood). Improvements in performance and quality, cost minimization...

MGA is a company specialized in the machining of precision mechanical parts and sub-assemblies for the aerospace sector. It is part of the ARM group. The precision machining division of MGA ensures the production of mechanical parts in small and medium series. MGA can machine all types of raw materials: steels, stainless steels, aluminum, inconel, titanium. The company MGA primarily works for businesses in the aerospace, automotive, and nuclear sectors.

... materials such as plastics, CFRP/GRP, nonwovens, foams, or precious metals can also be cut, mainly in the form of sheets, but also in the form of reshaped workpieces like deep-drawn parts and profile sheets or directly from coils.

... ship owner/captain: You have only one competent direct contact throughout the entire construction period, who reliably implements your demanding and unusual requirements. No matter where you utilize the services of KREMA Yachtservice. • Retrofitting for accessibility • Procurement and delivery of spare parts to any location • Insurance matters • Niche doors made of plastic and GRP • Water and...

Wholesale company that can offer a wide range of standard and special production metal construction parts such as: Welded gratings (SP); Pressed gratings (RR); Stair treads made of gratings; Plastic gratings (GRP); Expanded metal; Perforated sheets; Woven nets; Perforated profiles.

... storage of hazardous materials • Manufacturers of molded parts made from composite materials We deliver: • Traditional transport and storage containers for a wide range of applications • Custom GRP molded parts • Heating oil tanks and thermal storage • Grit containers with a specially developed vandal-proof lid, as well as a complete winter service program • and much more... Just a few examples of our extensive product range and countless services.