gas air heaters

...Flameproof unit air heater ATEX EEx d IIC T3 ATEX The „FUH“ range of flameproof electrical unit air heaters offer a hazardous area, space heating solution, for large premises requiring high heating capacity. They are certified for zone 1 or 2 areas, where the flammable atmosphere is a group IIA, IIB or IIC gas. This heater has an internal fan.

...Hot air heaters with gas operation from 23 to 34 kW The K gas hot air heaters are units that work completely autonomously, that is, they do not need heat dissipative elements, which reduces acquisition and installation costs. Its operation can be methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be...

...Gas unit heater free blowing. 90 KW, ErP 2021...

... Sirokko 50 Sirokko 60 Sirokko 70 Nominal Thermal Power (kW) 47,5 57 66,5 Natural gas Consumption (Nm3/sa) 5 5 7,5 Heating Area (m2) 200-400 250-500 325-650...

...CSN® Insulator Heaters are used in flue gas cleaning systems for preheating the insulators and as protection of the equipment against condensation and freezing during shutdown periods...

...Electrical air heaters for air or process gas heating in pressureless systems: ·         Ventilation systems, Ex HVAC plants ·         Supply air heaters for machines ·         Heating of process gases ·         Heating of containers or heating chambers ATEX, IECEx, TR-CU and other international certificates...

... called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs...

...Finned Tubular Heaters are the ideal solution for air or gas flow heating processes. The ribs enlarge the heat-releasing surface significantly. Basis of the finned tubular heaters are our 8.5 mm tubular heaters. The outer diameter of the fins is 28 mm. The elements can be delivered straight, U-shaped or circular (special design on request). Tubular heater as well as fins are made of stainless...

... compared with hot air or gas-burning “space ray” type heating systems or other forms of electric heating often used in these environments. Additional benefits: Silent operation, without fumes – consequently raising no health and safety issues; Cheaper installation than oil or gas alternatives – all you require is electric cable; No maintenance; Zoning so heat is “focused” exactly where you want it; No red glow; Lower consumption levels.

... worldwide. They are currently the most-efficient equipment and heat any type of fluid, directly or indirectly, liquid or gaseous, at the desired temperature, flow rate and pressure. They utilise electromagnetic induction to generate heat and do not require electrical resistances of any kind, nor the use of fossil fuels. DIFHEMI inductive fluid heaters have permitted realising heating projects...

...Liquid gas Material:Stainless steel Ignition type:Piezo ignition Width:780 mm Depth:780 mm Height:2220 mm...

...troubleshooting, and maintenance of your heating and plumbing Heating We provide sales, installation, and after-sales service for all heating systems and ensure that we offer you tailored solutions in terms of energy savings and thermal comfort. Electric, gas, and fuel boilers Heat pumps Reversible air conditioning Thermodynamic water heaters Underfloor heating Atlantic Fuel Gaz, the specialist for the maintenance and upkeep of your heating in Saint-Nazaire 5, av Barbara – BP 12, 44570 TRIGNAC 02 40 53 00 54...

...The HTI-Gesab combustion air preheater (LUVO) extracts residual energy from the flue gas and preheats the combustion air for the heaters. This significantly increases the efficiency of oil/gas-fired heaters and extends the lifespan of the systems. The HTI-Gesab combustion air preheater (LUVO) is designed as a smooth tube heat exchanger. This results in a high heat transfer to the combustion air and ensures easy cleaning of the heating surfaces.

...Ergonomic design, portability and easy installation Suitable for all indoor spaces as cafe, restaurant, shopping Malls and industrial spaces.. Equipped by stainless steel with high efficiency %98 Comfortable with low sound level Thermostatically equippied Gas saving with 15-24 minutes timer option 3-10 stage adjustable control system...

...OIL HEATER FAN IDE 50The indirectly fired oil fan heater IDE 50 ensures clean, dry hot air Indirectly fired air heaters such as the oil heater fan IDE 50 are an ideal solution to provide large amounts of clean and dry hot air, as it is required for the heating of construction sites, marquees, exhibition halls, workshops or stables. Longer outdoor applications are no problem for the oil...

... refrigerants. Air distribution and return are achieved through ducting, which is the best solution for cooling complex spaces. The use of various compressor and refrigerant types ensures seamless operation at high cooling water temperatures. Heating can be provided by electric heaters, steam, hot water, and thermal oil sources. Cooling Capacity: 5 kW - 192 kW Dust Resistant: Dust-resistant design Corrosion Resistant: Corrosion-resistant design Vibration Resistant: Vibration-resistant design...

...Gas.- Air heaters for clean gas flows up to 1200°C. Standard outputs from 3.5 kW to 40 kW. Standard flow rates up to 100 Nm³/h.

...Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for...

... offer a complete package, wide range of HVAC products directly from our huge stock in Turkey for export: Boilers (wall-hung domestic type boilers / industrial type gas boilers), panel radiators, towel warmers, electrical/gas water heaters (instantaneous water heaters, storage tank water heaters), air-conditioners, natural gas space heaters, gas heater fans, spare parts of boilers, plumbing...

We are a manufacturer of natural gas ceramic heaters and hot air heaters. We are looking for country distributors. Please contact us. We have a yearly manufacturing capacity of 5000 pcs heaters.

... thermostat can be equipped on each device in order to regulate the needed temperature. For a more efficient use of the gas heaters, it is recommended to destratify the air inside the greenhouse using recirculation fans. Advantages: - the most efficient means of heating the greenhouse - the possibility of setting the necessary temperature - reduced maintenance costs - relatively low installation costs - zero operation costs (automation) The heater has additional accessories that can be viewed on our website, as well as other types of heating systems.

...\nMaximum ambient temperature 40°C\nConnection: 230 V single-phase, 230 V three-phase, 400 V three-phase to be specified\nSpecify T3 or T4 when ordering\nOptional: Built-in ambient thermostat in a housing","REA 10":"REA 10","REA 20":"REA 20","1000":"1000","1165":"1165","* 230V mono uniquement":"* 230V single-phase only","2000":"2000","3000":"3000","500*":"500*","790":"790","595":"595","Ref":"Ref","970":"970","1500":"1500","Sections":"Air and gas heating, space heating, ADF radiators - Air heaters","1540":"1540","REA 30":"REA 30","Watts":"Watts","LONG HT T4 135°C":"LONG HT T4 135°C"}...

...HECHT 3015 is suitable for heating buildings and other adequately ventilated areas. Connection 220V / 50Hz The electrical power is only 28 W Must be connected to butane. Gas consumption is approximately 1.07 kg / h Heating power of 15 kW. Airflow turbine of 300 m³ Air temperature at 600 °C Maximum recommended space: 100 m². Protection degree IP44. The blower is equipped with a safety...

... gas, oil, and solid fuels. Criteria for differentiation include the type of air supply (forced air/atmospheric) and the type of flame monitoring (ionization electrode/thermocouple), as well as the type of gas with which the ignition burner operates (e.g., natural gas and liquefied gas). The ignition burner must be installed in such a way that safe ignition of the main burner is ensured.

... building applications, the EX-TEC® PM 580 indicates the concentration of carbon monoxide in the ambient air and triggers an audible and visual alarm in case of excessively high levels. Toxic carbon monoxide is formed in combustion appliances, such as heaters, when there is insufficient air supply, posing a risk to individuals.

... heating presence) to the biggest boilers located in central heating sources (big boiler rooms with pipe distribution network to remote objects). Boiler´s media: Water (warm/hot), Steam (low/mid/high pressure), Oil b) air heaters (air/air, water/air exchangers) c) ovens/furnaces (generally) d) dryers (generally) e) food industry (bakery, brewery, sugar refinery, … ) f) industrial drying furnaces (stone, wood, …) g) paper industry – drying oven h) communal waste incinerators i) composting and sanitary process...

... necessary. The high airflow and low noise level make this an excellent and versatile heating solution. For good airflow over long distances. Suitable for commercial applications, both indoors and outdoors. Ideal for both large-scale and localized heating. To save fuel, an external thermostat can be used. Can be deployed for HVAC applications, for both the industrial sector and construction, wherever warm air is needed. DESIGN AIRFLOW: 25,000 CONNECTIONS: 32 A 5-pin POWER: 380/415V 3P neutral and earth 50 Hz HEIGHT (M): 1.89 LENGTH (M): 3.80 WIDTH (M): 1.20 WEIGHT (KG): 1,100...

...The centerpiece of the Schwank infrared heaters is the unique Schwank ceramic plate invented by Günther Schwank. The infrared energy is generated through clean combustion of a gas-air mixture in the ceramic plates. The surface of the ceramic plates heats up to about 950°C, glowing "brightly" and emitting infrared radiation. Reflectors direct the radiation specifically downward into the occupied...

...duct air heaters, pipelines, heat furnaces, exhaust gas purification systems, and filter systems. Options -various standard flanges -insert module for existing ducts -complete solution with control and electronic monitoring -with additional fan -finned tube radiators Ø 8.5 mm with fins Ø 25.0 or 50.0 x 25.0 mm possible...

... welding nozzles in screwable (M10 thread) or plug-in designs. Round nozzles for surface welding, tack nozzles, or nozzles for pull welding (quick welding nozzles) for round wires or variously shaped triangular wires are available. For all our welding machines, we also supply suitable wide slot nozzles in different designs and sizes. However, the use of certain nozzles in conjunction with air heaters or hot air welding machines is not limited to the welding of thermoplastics but...