copper sections

...soft, tinned; soft, bare; hard, bare; cross-sections: 10 mm² – 500 mm²; fine & multi-stranded; according to VDE 0295 / BS 7884:1997...

...Our company has a range of products in various variations, sizes, and cross-sections for use in the electrical engineering sector, such as in anodes and similar applications, produced on extrusion and drawing lines. Copper strips are manufactured in accordance with TS EN 1652 and DIN EN 13601 standards. The copper content of our product is a minimum of 99.99%. Width: 15 mm to 160 mm Thickness: 3 mm to 60 mm...

...Material: aluminum Strong adaptability Reliable mechanical structure Strong repulsion (adjustable) High efficiency in separation Applications: Electronic waste disposal (refrigerator dismantling lines) Separation of aluminum cans and ferrous metals Separates nonferrous metals from the bottom ash of boiler Separates aluminum or copper block from the sections of abandoned cars Separates...

...For conductor cross-sections from 0.14 up to 10 mm² (AWG 26-8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4...

...We produce flexible and rigid versions of our copper connections. Which connection would you like us to create for you? Flexible braids made from round or flat copper conductors are the optimum solution to link electrical connections subject to mechanical vibration. Different conductor cross-sections with tinned ends or crimped and punched ferrules, with insulation or bare: our customers...

...Reducers and increasers are used to reduce or increase the diameter of one to three REFNET® sections...

... to its concept based on great flexibility, this type of piping can accommodate bending radii of up to 180° while maintaining its shape. The versions offered come with textile reinforcement or metal reinforcement depending on the diameter of the pipes. The interfaces can vary widely, from typical 2-hole oval flanges to copper sections, as well as ends with fittings or threaded nuts.

...Belit Elektronik is able to make energy, battery cables and battery management system (BMS) cables up to 150 mm2 cross sections in line with the needs of the power electronics sector.

... rooms General Specification Zinc-plated steel case frame Hermetic, scroll or semi-hermetic type compressor Air-cooled condenser with fan motors Air fan guard made of plastic or metal Power supply cable Condenser coil made of copper tube and aluminum fins Condensing unit supplied with nitrogen holding charge...

...lengths, and cross-sections Benefits: - High Strength: Ideal for load-bearing structures and precise applications - Durability: Made from robust materials for a long lifespan - Versatile Applications: Suitable for construction projects, mechanical engineering, manufacturing processes, and more Trust the Eder Group for your solid and bar material needs and benefit from our extensive experience and commitment to quality.

...We supply Cu compounds in various cross-sections and constructions.

... on even the most demanding orders, offering to cut sheet metal made of a variety of materials, such as carbon steel, stainless steel, aluminum, copper or bronze. We also have a gas burning machine, dedicated to metal sheets up to 150 mm thick. In addition, we have specialized machines for cutting pipes, profiles and sections with maximum dimensions of 450 x 450 mm. We can cut tubes and profiles in straight sections as well as at an angle. The range: steel: 0,5 - 25 mm INOX: 0,5 - 30 mm aluminum: 0,5 - 25 mm brass: 0.5 - 10 mm copper: 0.5 - 10 mm galvanized: 0.5 - 4 mm...

... cables in cross sections up to 6 mm². Owing to their high temperature resistance up to 250 °C in the case of glass silk insulation and 600 °C in the case of mineral fibre insulation, these connecting cables meet the most demanding requirements.

...sleeves, knight heads, bases, piston rods, long pin inserts, dowel pins, drive pins and rods, ball head bolts, machined parts with long rods, tube sections with long threads, non-standard threaded bolts and nuts, extension rods, etc. We manufacture custom metal turning parts for all industries, offer precision CNC machining services, and welcome you to contact us to discuss your projects. sales@mxmparts.com WhatsApp +86 13780014913...

...Copper scrap for refining...

...In the field of turning technology, we can offer you a range of prototypes, pilot series, and small series, as well as the production of large series as a capable partner. We process all materials such as automatic, heat-treated, stainless steels, aluminum, brass, copper, and more! max. diameter for processing bars and/or coils: Ø 65 mm max. diameter for processing sections: Ø 380 mm max. processing length: 500 mm all common heat and surface treatments available assembly of components and more… We are also happy to assist you as a competent and efficient partner in the area of contract turning!

...In electric equipment and devices, as well as in electric system of railway.The conductor is made from copper multi-core wire by twisting, class IV flexibility according to standard GOST 22483-2012. Nominal section of the conductor is 1.5-up to 150mm2.according to the sections it is as follows: 1,5 : 6mm2 inclusive 50m 10 : 25mm2 inclusive 2000m 35 : 70mm2 inclusive 1000m 95 : 150mm2 inclusive...

...Our Electrolytic Copper (C11000) shaped wire is used in magnetic applications such as superconductors in MRI scanners that require high copper content and rectangular cross sections. Electrolytic copper wire products have engineered channels to accept round superconducting wire such as Nb based low temperature wires. We have the expertise to manufacture C11000 copper wire to your exacting...

...We offer twisted pair installation cables in various conductor cross-sections, shielding, lengths, and performance classes such as Cat.6A, Cat.7, and Cat.7A for a future-proof network. Other cable variants available upon request.

The LEONI Business Group Wire Products & Solutions is a leading provider of advanced products and solutions made from copper, electroplated copper, LEONI-Histral® alloys, and special materials. These are developed in close collaboration with our customers for specialized applications in electrical engineering and electronics, as well as for cable technology. Our versatile product portfolio include...

...cu DIN EN 13602. The diameter of the copper wire is 0.20mm. They are generally used for grounding connections, power cords, flexible connections subjected to vibrations or repetitive movements. Upon request, we can also produce other sections or constructive dimensions.

...Pin clamps for the electrical industry made from non-ferrous metals such as brass, lead-free brass, and copper alloys in batch sizes ranging from 1,000 pieces to 10 million parts depending on cross-sectional size. Services and processing cross-sections Shape: Profile, rectangular, round Pin diameter: from Ø 0.8 mm to a maximum of Ø 10 mm Material dimensions: Ø 2 mm to Ø 12.5 mm Part length: up to a maximum of 65 mm Drill diameter: Ø 0.8 to Ø 8 mm Thread: Ø 2 to 8 mm Galvanization: Bare, tin, zinc, nickel, gold, silver, copper, or according to customer requirements...

...The Rigid Bending Line can operate with reels of 6 + 12 + 18 + 24 + 30. It can process up to 91 wires. The transmitter reels used in cages are available in optional sizes of 400, 560, and 630. With this line, it is possible to create round, front twisted, and front untwisted sector sections in copper & aluminum. This line can perform flex and solid bending between cross-sections of 10 mm² and 630 mm².

...Top Features: - 1200-piece Premium Ferrule Set - Cable cross-sections from 0.5 to 10 mm² (DIN color code) - Material: Polyamide, Copper alloy - Voltage resistance (max.): 440 V...

...The Profile and Pipe Bending Machine is used to roll the profiles of materials into rings, circles, or sections of a circle. It can operate in both horizontal and vertical positions. The Profile and Pipe Bending Machine can handle a variety of bendable materials, including low-carbon steel, medium to high-carbon steel, stainless steel, aluminum, copper, cast iron, and tubular or rod-formed iron...

...We are well-equipped for saw cuts that require minimal machining allowances. Our KASTOwin guarantees the highest accuracy for both single and series cuts, thanks to the latest technology. Saw cuts from rolled plates in aluminum, copper, and brass are another focus of our delivery program, which we can provide for you with the highest precision and short delivery times. Saw sections of bars and profiles from 10 mm in length and up to 460 mm in cross-section Cost-effective large series through fully automatic saw feed Saw cuts from rolled plates in all formats...

... Wire Sections and Materials Processed: We work with the following metal wire sections: round, half-round, square, flat Diameters: 0.2 to 18 mm In terms of materials, we work with the following wires: C9D mild steel wire, S235 steel wire, galvanized mild steel, stainless steel wire (430 stainless, 304 stainless, 302 stainless, 316 food-grade stainless), spring steel wire, galvanized spring steel wire, aluminum wire, stainless spring wire, copper wire, brass wire, zinc-aluminum wire, Crapal, Bezinal, rope for...

...Compact design, screw technology, - connection points for bridging combs, - quick integration of custom electronics solutions, - solder-free PCB contact. Connection cross-sections Solid wire (rigid) 0.25 mm² - 2.5 mm² Stranded wire (flexible) 0.25 mm² - 2.5 mm² Stranded wire with ferrule 0.25 mm² - 1.5 mm² Dimensions Strip length 6.0 mm Torque Torque 0.50 Nm Materials Solder tab Copper alloy Spring clip Stainless steel Insulating material Material PA 6.6 Flammability class UL 94 V-0 Temperatures Operating temperature -30 °C - 105 °C...

...Single wires configured with contact and tinned. Marked, labeled, identified. Single wires are electrical conductors offered in various cross-sections. They consist of multiple thin copper strands, providing high flexibility. The conductor is usually insulated with PVC. Single wires are predominantly used where flexible conductors are required. They do not break even under frequent mechanical...

... adjusted to facilitate the installation of any device and simplify the configuration of connected cables. The black-colored right and left sections of the tempered glass door located at the front of the network rack cabinet help conceal excess cables from the user's view, providing a more aesthetic appearance to the cabinet. The disassembled (Flatpack) option offers savings of up to 60% in shipping costs and storage space.