calibration of measuring equipment

...The Digimes Universel is a 5 KHz carrier current bridge for resistive, inductive or differential transformer transducers connected in full or half bridge. The sensitivity is adjustable by the user between 2 mV/V and 100 mV/V according to six measuring ranges. Gain and offset can be adjusted with potentiometers to allow calibration of the sensor. There is also the Digimes Compact, dedicated to one sensor.

... equipment management as a pillar of quality assurance; Measuring and test equipment management as part of the quality management system – test equipment officer; Suitability of devices and sensors as measuring and testing equipment; Traceability and calibration; Documentation and employee training; Monitoring and maintenance of the measuring equipment database.

...With Ellab's calibration devices, you can easily take care of the temperature calibration of your sensors yourself, saving you a lot of time and reducing your costs!

... Body. The calibration certificate records the displayed values for mounting positions at 0°, 120° and 240°. During calibration in field, the reference load cell is inserted in line with the flux of the press-fit measuring equipment. The force application is of central significance here for the quality of the measurement. Special force application parts are required, so that the line of action...

...High-precision angle measuring system with +/-0.1s accuracy for measuring and calibration applications. The signal sampling is done by an interferometric operating principle (laserscale) The graduation period is 1µm, the generated signal period of the output signal is 250nm. Scale errors are self-compensated by using six reading heads in a special arrangement. The measured values can be...

... use (rubber protective frame) — Dust and splash-proof, suitable for use in high humidity — Intuitive user guidance through symbols — Color illuminated display — Battery level indicator — Error message in case of malfunction Scope of delivery: — Residual oxygen measuring device — Charging cable with adapter plugs for worldwide use — Hose set, 1 m, including filter and cannula — Calibration...

...The pressure transducers of the 6L series have a small and compact design, making them ideally suited to OEM applications with limited installation space. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet. Pressure Ranges:0…10 to 0…200 bar Accuracy:±0,5 %FS Long Term Stability:±0,35 %FS Dimensions:⌀ 13 mm x 4,5 mm Temperature Range:-10…80 °C...

...Luminance standards and radiance standards are used in photometry and radiometry, in particular for the calibration and characterization of cameras and optical measuring devices. Another application is the determination of reflection, transmission and absorption properties of materials. Luminance and radiance standards are homogeneous light sources that have a uniform brightness over their...

... market and offer a selection of SI, metric and American units of measurement. Equipped with SI calibration as standard. Optionally available with calibration in imperial (ozf·in, lbf·in) or in metric (kgf·cm) units. There are various application types, even for measuring rotating objects. Combined with Measurement Board (No. 809), it can be fixed to use as torque screwdriver checker, etc.

... measurement. You can freeze the measurement values to avoid losing them and measure the temperature with automatic compensation. Additionally, it includes the necessary regulators for easy calibration of the device when needed. It is the perfect product for verifying the proper sanitation of the water dispenser. It operates on AG13 batteries, allowing complete freedom of movement without needing to be connected to the electrical grid.

... frequent service and calibration intervals are recommended. Our Calibration Laboratory Engineers perform routine servicing, commissioning, fault finding, repairs and installation services in accordance with our accredited quality system. Our calibration range of -90 °C to +20 °C dewpoint is traceable to National and International Humidity Standards at the National Physical Laborarory (NPL). SHAW products are developed to be reliable, easy to install and simple to operate, We are committed to providing the highest quality products and services for accurate and reliable moisture measurement.

... with 12 acoustic chords a flow conditioner is no longer required; standards such as AGA9, ISO 17089 and MID are met with just 5D straight inlet piping. CBM flowmeter diagnostics are standard and give an exact picture of what is happening inside the flowmeter. With the optional KROHNE Care diagnostic expert system an integrated web server becomes available that presents the results as an easy to access webpage – in plain language. Fluid::for gas Technology::ultrasonic Other characteristics::in-line...

...Multifunction scales with fully stainless steel structure with degree of protection IP65, suitable for being used in humid environments. Equipped with waterproof keyboard immune to dust and splashes with diplay 18 mm LCD backlit 4-digit legible. The weighing plate measuring 210x210 mm and is easily washable. Power is supplied via external network power supply included or rechargeable batteries...

...ELEVATED READING HEAD ON COLUMN Large stainless steel platform measuring 43 x 53 cm Sequential calibration system Non-punched Robust construction with overload safety Ease of use Easy reading thanks to a 27 mm high liquid crystal display Ergonomic control panel Operates on built-in rechargeable battery (100 hours autonomy) Built-in transformer Reference: SS150 Brand: Afi Collin-Lucy Net weight (kg): 19 Dimensions in MM (LxPxH): 430 x 700 x 790 Capacity: 150 kilos - 20 grams...

...Maintain the high accuracy of your BlowerDoor measuring technology by regularly submitting it to a calibration. Benefit from the high accuracy of the BlowerDoor measuring technology: At ± 4% or rather ± 5% (flow rings D + E), the accuracy of the BlowerDoor testing flow rings – as well as that of the pressure gauge DG-700 (± 1%) or DG-1000 (± 0.9 %) – clearly exceed the minimum legal requirements...

...A complete “all in one" compact system, for multigas measurements, based on the fieldproven MIR 9000 analyzer and onboard SEC sampling system. Fast & simultaneous measurement of up to 10 gases among HCl, NO, NO2 (NOx), SO2, CO, CO2, HC, CH4 (TOC), HF, N2O, O2, at the sampling location. • integrated sample drying & system conditioning, no sample line necessary • designed for measuring wet & corrosive samples • complete CEMS in one cabinet combines infrared analyzer, sample conditioning • highly accurate, excellent calibration stability with automatic optional check...

... sensitivity and stability. Low start pressure is achieved through use of a hollow piston and aluminium head. NOTE: Model BGP1 can be used on vacuum with a model 24 adaptor. All certificates issued for Budenberg Dead-weight Testers are fully traceable to national standards via equipment with UKAS calibration certificates.

... Dynamometer; any Magtrol Dynamometer Controller and M-TEST Software for more demanding motor test applications. If currents continuously reach above 20 amps, an external sensor must be used. APPLICATIONS: - AC/DC Motors - Lighting Fixtures/Ballasts - Office Equipment - Household Appliances - Power Tools - HVAC Equipment - Calibration of Test and Measuring Instruments - Transformers The 7500’s...

... and faulty processes and products be avoided from the outset. For companies that wish to obtain or maintain ISO 9001 certification, regular calibration of testing equipment is mandatory. Since 1999, the German calibration service DKD, or the German Accreditation Body GmbH (DAkkS), has accredited our calibration laboratory according to DIN EN ISO / IEC 17025, among other things, for the...

... another. The measuring device can be placed manually or with a device for sampling measurement between rolling stands and can measure the profile of the still hot product in seconds. The measurement result is displayed as a point curve on the system's tablet PC, and the profile can be evaluated against predefined measurement specifications and target contours. When measuring with Calipri, the...

... the requirements of ISO or other quality standards. Pressure Calibration checking on Leak and Flow testers Checking of other types of pressure measuring instrument Automatic sleep mode Print out (USB or RS232) Battery level check LCD display (4 x20 characters) 1 year warranty Accessories : Carrying case, pressure generator (1000 Pa), pocket, protective holster. Operating:+ 10°C at + 45°C Storage:0°C at + 60°C...

...DWL-8500XY is a 2-Axis ultra precision inclinometer with built-in Vibrometer, having resolution and accuracy of 1 arcsec. or 5µm/M and wide measuring range for precision leveling, plane angle measurements, surface 2D profiling & alignment tasks, and capable of real-time wireless Bluetooth/USB remote measuring & data logging. The accuracy performance is verified by accredited calibration & test bodies in Japan & Singapore National Metrology Center, under ILAC & A2LA certifications traceable to NIST, JIS & DIN.

... pistons are driven by a stepper motor via a spindle. In the initial state one piston is fully retracted and the other fully extended. The volume flow can be set with high precision via the piston cross section and the travel speed. At the end of the calibration process, both pistons are in the opposite position to the initial position. The calibration device is preferably operated with air, which can be supplied with up to 6 bar. The EP gas bell pistons convince by highest measuring accuracy up to 0.15% (k=2).

... supplied USB cable. + high accuracy due to high sample volume of 13 liters + bulk density compensated + quick measuring results + wide range of calibration curves + customer calibration function Measuring range: 5 to 50% water content Resolution :0.5% water content Calibration accuracy :+/- 1.5% sample volume:13 liter Automatic temperature compensation:yes...

...-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT...

... permanent accuracy of torque measurement is facilitated by a semi-automatic calibration routine. Existing engine/motor test beds can be modernized by an MP Computer. Examples of optional additional functions: - Automatic gravimetric determination of the specific fuel consumption. - Several possibilities of output and documentation of measured values. - Acquisition of non-electric and electric measuring values on combustion engines, electric machines, etc. - Special functions required by certain measuring tasks.

... the electronic unit are mounted outside the conditioning chamber. Modular, digital hardness testing system in conjunction with a conditioning chamber for individual or series testing. Electronic unit Through the electronic unit, various parameters such as dwell time, heating time, and profiles for series testing can be set. Series tests are automatically conducted after the parameters are entered. Our service offerings: - Calibration - Reminder service - Loan equipment - Contract measurement - Maintenance contract - Training...

... specific application. With Memosens digital technology, the CUS51D sensor combines maximum process and data integrity with simple operation. It is resistant to corrosion and allows for laboratory calibration. Process Temperature: -5 to 50 °C (23 to 122 °F) Ambient Temperature: -20 to 60 °C (-4 to 140 °F)...

...- Consulting on the introduction and implementation of a measurement equipment management system according to DIN 32937. - Consulting and creation of work instructions/process descriptions as well as calibration instructions in the field of measurement equipment management. - Training employees in the handling of measurement and testing equipment. - Taking on measurement tasks on-site for the measurement quantities of length (e.g., component measurement), pressure (e.g., manometers), torque (e.g., torque wrenches, torque screw tools), and force (e.g., industrial scales).

...Year: 01/2018! Hours of use: 6,100 h Press force: 170 ton Folding length: 4.080 mm Machine is in very good condition and can be inspected under power in France. Immediately available. Standard equipment closed car chassis RAM Spherical suspension of the piston, with the inclination of the piston Electro-hydraulic drive down Hydraulic unit measuring system along the Y axis hydraulic oil in the...