air intake filters

... filters, and products in which this method is implemented are indicated with Eurovent 4/11 certificate located thereon. Our Eurovent certified products protect your health and the environment while allowing you to save money. Our high technology pulse and static air intake filters preferred by well-known gas turbine manufacturers are ideal under harsh environmental conditions. We provide filtration solutions with negligible turbine fouling and maximized turbine heart rate and also offer solutions for coastal and offshore applications against the highest humidity conditions.

... industry. Depending on the location and application area, we optimize our electrostatic air filters with additional cleaning stages (TD/TR) as well as intake collectors and pre-separators. 1. Type: EL 1000 NS EC Extraction capacity: 1,000 m³/h Intake collector: without intake collector EC fan: EC with EC fan Filter stages: single stage Reinforced fan: with reinforced fan Pre-separator: without pre-separator...

... maximizing the air-water contact zone. The AER-AS is easily adaptable to nearly any basin configuration. With a lengthened intake cone section, the AER-AS can penetrate water depths up to 8 m. This allows the unit to draw activated sludge of low oxygen concentration from the bottom of the basin to be transformed into an oxygen-rich surface discharge. Easy to install, robust and reliable, the Aquaturbo AER-AS ensures efficient aeration and mixing for years of maintenance free service.

...G3 or G4 pre-filter in roll form, made of synthetic fiber suitable for pre-filtration and air intake for suction and ventilation. Filter used for all air intakes for suction, ventilation, air treatment units, electrical cabinets, and enclosures. Several thicknesses, densities, and efficiency levels available, in compliance with the EN779 / ISO16890 standard. Since 1992, Technicis Filtration has been a French manufacturer of filters, specializing in air filtration in industrial paint booths. G3 pre-filter: 150g/m² G4 pre-filter: 200g/m²...

... heated. - Fully compact and robust equipment. - Very quiet operation thanks to the acoustic insulation of the burner cabin. - 3 centrifugal fans with variable speed. - Efficiency over 90%. - External finish with dry polyester paint in the furnace. - Thermal insulation through an air chamber and/or fiberglass. - Air intake filters included to prevent dust spread in the area to be heated. - Electric panel with room thermostat included.

...Made of 18/10 stainless steel AIS304, with "crushed" pleat finishes. Non-visible surfaces made of AISI 430 stainless steel, fully welded sides. Fresh air intake chamber insulated to prevent condensation. Adjustment for incoming fresh air flow. Adjustable fresh air intake grilles on each side. 7 stainless steel filters with "labyrinths" measuring 500x500 mm. Welded peripheral gutter for grease recovery. Lower drainage tap. Recessed lighting with "IP65" neon. Reference: AUP4013 Brand: Diamant Europe Net weight (kg): 140 Dimensions in MM (LxPxH): 4000x1300xh500 Volume (M³): 3.57...

...RF-SE Filter Material: Synthetic Fiber Filter Efficiency (EN 779): G3 / G4 Filter Class (ISO 16890): ISO Coarse 60% / ISO Coarse 65% Dimensions: Available in rolls or cut pieces Color: White / Blue & White Final Pressure Drop: 250 Pa Operating Temperature: 80°C Application Areas Used as a dust-retaining pre-filter in ventilation devices, air conditioning systems, and clean air intake systems. Advantages High dust retention capacity and low pressure drop with advanced fiber structure Suitable product variety for all weather conditions...

...DuoPleat Filters are activated carbon and particulate filters in one. Their unique filter media combine a special activated carbon layer with a three-layer high-performance nonwoven fabric made from synthetic-organic fibers and microfibers on the air intake side.

...Viledon cassette filters meet high standards for clean air quality in: HVAC technology, intake air filtration for gas turbines, industrial processes in chemicals, pharmaceuticals, and food production. Characteristic of all Viledon cassette filters is their high performance: All models are distinguished by optimal airflow with low pressure differences even at high flow rates.

...Aero Pleat filters are designed as a pre filter in air conditioning and air intake applications. The filters are made up of cotton and synthetic fibers and areencased in wet strength card boards. Filters are classified with MERV9/F5/EU5 efficiency. Aero Pleat SC filters with standard capacity are made with apleat distribution of 10 pleats per linear foot. Aero Pleat HC filters with high capacity are made with a pleat distribution of 15 pleats per linear foot.

... Air Consumption: 120 Nm³/h Negative Pressure: 300 mbar at 6 bar Compressed Air Connection: ½“; with hanging silencer size 4. Features With an integrated 2.2 m² HEPA – safety filter cartridge class H Filter container RECLEAN EL with filter elements (total filter area: 2 m²) made of polyester needle felt EL – class M The filters are self-cleaning during operation. Manual cleaning, which generates a counter airflow through a bypass air flap, allows the filters to be blown out from the inside to the outside.

...The PURIFIAIR.620 air purifier from asecos effectively contributes to reducing pollutant levels indoors with its multi-stage filtration system. The dual-sided air intake ensures that the combination of EPA E12, HEPA H14, and activated carbon filters captures even SARS-CoV-2 viruses safely. The PURIFIAIR.620 air purifier offers the following advantages: ››› The mobile design allows for flexible...

... up to 16 air changes per hour on-site. This system can be installed parallel to an existing system or connected to the fresh air intake to provide additional fresh air (either cooled or heated). Return air systems – if return air systems need to be applied, we can supply MERV or HEPA filters on the intake side of our AC units or air handlers.

...Medium and high efficiency filters M6-F9 specially designed for air intake in air conditioning systems.

...Euromat'équip can meet your filtration needs with its range of fuel, lubricant, coolant, and air intake filters, hydraulic filtration, and bulk storage tanks.

...Automobile and Truck Filters * Fuel Filter * Cabin Filter * Air Intake Filter * Oil Filter High-quality, CE-certified filters suitable for all brands, models, and series are available, made in Turkey.

...Intake filters with and without bends for side channel blowers Intake filters with and without bends from 1 1/4" to 4"...

...The Raasch RSB filter mats are designed for pre-filtering or coarse dust filtration of the intake air in climate and ventilation systems. Areas of Application The Raasch RSB filter mats are designed for pre-filtering or coarse dust filtration of the intake air in climate and ventilation systems in public buildings, offices, factories, and facilities of all kinds. They ensure balanced dust...

...Sandwich style EPS (Epispastic Polystyrene) 50 mm thickness. Door: 3 pieces of luxury front doors with 0.8mm thick colorful steel skin. Air Circulation System: 1X5.5kw intake fan. Belimo damper burner: Riello FS10 burner, 100000Kcal/h. Ceiling filters capture granules larger than 5 μm.

..."Made in Germany" ABAC HVLP Paint Spraying System SG 2000: Motor Blower ABAC SG 2000, Spray Gun ABAC PN 1A, Air Hose 6 m., Dipper for Viscosity Checks, 2 Spare Intake Filters. Scope of Supply: Adjustable low-pressure motor blower SG 2000 with continuous pressure regulation and 5 m connecting cable. Spray gun PN 1A with intermittent air supply, with 3 nozzles 1 - 1,5 - 2 mm and 0,7 I...

... degree of separation of a cyclone is not normally sufficient to meet the usual environmental protection requirements. The cyclone exhaust air must be post-filtered in most cases. Product description A cyclone essentially consists of three parts: the intake cylinder, the cone and the immersion tube. In the intake cylinder, the raw air is brought into a circular path by means of tangential injection...

...Color mist extraction station with pre-assembly and lighting An intake system draws in fresh air and blows it into the interior of the spray booth through fine filters. At the same time, the explosion-proof exhaust unit sucks in the booth air and the overspray, directing it through the dry filter units to the outside. The dry filters capture the sticky paint particles, and the cleaned exhaust air can then be expelled through the roof. Due to the constant need for fresh air, there is an increased demand for heating energy to warm the intake air, especially at lower temperatures.

...Gas analysis filters for air and gas filtration. For all gas filtration applications, whether intake, particle, coalescence, or bypass filters, as high-pressure or high-temperature filters. Protection of measurement and control technology. Separation of fine particles and droplets using coalescence methods, adsorption of disturbing gas components. Filter elements for every application...

... French Installation Manual French User Manual French Design Manual English Service Manual English 2 sizes of indoor units available: power range from 3.6 kW (cooling mode) to 5.6 kW (heating mode). 2 options for air return: from below or behind the product. Integrated condensate lift pump. Built-in washable pre-filters. Pre-cut for fresh air intake. Adjustable available pressure from 10 to 50 Pa. Compatible with most market diffusers. Available in Twin version,...

...Proton's industrial ventilation chambers efficiently and effectively remove harmful fumes and smoke. With a wide range of design configurations, our ventilation chambers can meet most production requirements. The dry separator filters capture overspray particles carried by the air before the filtered air is released into the atmosphere through the exhaust system. Air exchange units and intake...

...To avoid any risk of oil contamination or premature failure of the parts in your screw compressor, you need to replace the filters on time with this filter set from HBM for screw compressors. The set includes an air/oil separator, an air intake filter, and an oil filter. The filters in this set are perfectly suited for Fiac and Michelin screw compressors in our HBM range. ⊕The three-piece filter...

... protects electronic components from overheating. The series of fan filters utilize a new technology for exhaust air flaps, achieving a high degree of airflow. A latching mechanism is used for installation, ensuring high stability and tightness. The system is typically installed with a filter fan at the bottom of the cabinet, which provides fresh air intake. This system consists of filter fans and an exhaust filter.

...Compressor filters in a stable, round design as pocket filters. The filter for cleaning the intake air for stationary compressors or compressor stations.

Filter New Service srl is located in Corsico (MI) at via Bernini 4 and specializes in the production, installation, and maintenance of ducting, components for suction and air conditioning systems, and filtration. The company also offers maintenance services for systems, installation of other machines and industrial equipment, and the construction and maintenance of air purifiers for industrial and civil uses. We provide technical consulting, informational sheets, and test reports.

The company PDAIR specializes in comprehensive service for compressed air installations. We supply our clients with both new machines and equipment such as compressors, dryers, filters, valves, and other components of compressed air systems, as well as a full range of consumables. We have the necessary technical and workshop facilities to carry out all repairs, overhauls, and regeneration of...