static holder

... We also offer prism holders according to DIN 69881 (VDI3425 Bl.3) in all nominal sizes. Our standard portfolio includes Capto, HSK, KM and ABS adaptations in addition to the standard holders. Moreover, our scope of supply includes special holding fixtures made according to customer drawings or innovative solutions of the EWS engineers designed to master production engineering challenges. The tool holders are manufactured at our factory in Uhingen and rightly carry the label: Made in Germany! Boring bar holder BMT Capto C4 Double boring bar holder Capto Bar Gripper Infee...

...Static tool holder for machines: Biglia B42 Biglia B111 Daewoo PUMA 200 Duplomatic VDI 30 Hyundai Kia SKT 100 Weiler DZ 42 (12-fach Revolver \ 12 tool mounts turret) Weiler DZ 65 YCM GT 200 MA Biglia B56 Biglia B200 Hyundai Hit 250 M Hyundai Hit 250 S Topper TB 25 YMBL Available in the following versions: Square locking drive radial right Square locking drive radial left Turning Tool holder axial right Turning Tool holder axial left Boring bar holder...

...Antibacterial ball pen with push-up mechanism. Monochromatic design in a wide range of bright tones with a glossy finish, especially designed for pad printing. Blue ink refill. Products with antibacterial treatments are able to drastically reduce the bacterial levels present on the surfaces of the materials, thanks to the addition of permanent static microbial agents, with high effectiveness in...

... build the pallet box without having to walk around, which speeds up the assembly process. Eurobin 1210-980 from Macroplastics Base size: 1000×1200 External dimensions: Minimum order quantity Condition: New Wall thickness (mm): 38 Flap: Yes Mouse-proof: Yes Lid: Optional Length: 1200 Width: 1000 External height: 980 Weight in/out of pallet: including pallet Wall type: Closed Product consists of: Pallet & walls made from one piece UN certified: No Height when folded (mm): 308 Internal height (cm): 824 External dimensions: 1000x1200xH980 Item number: PUN.b75.F Weight (kg): 50 Stacking (Static): 1+5...

... (ZC) and Burst Firing (BF) start at 4, 8, or 16 cycles at 50% of the required power. Heater Break Alarm – HB to diagnose both total or partial load breakage, as well as SCR short circuit detection (optional). Integrated fuse and fuse holder (optional up to 40A). Fixed internal fuses (standard over 40A). Integrated Current Transformer (CT) (optional). System wiring to Flat Cable (optional up to 40A) for multiple connections of various Heater Break alarm relays or analog input. IP20 protection.

...The standard height of the product is 720 mm. A fixed traverse is used according to the measurements of the table. Electrostatic powder coating technique is applied to our products. Production in custom sizes and demounted shipment. Practical, easy installation. Our products have been patented. Matte black static coated iron profile foot Headphone holder Cup holder Cable organizer Plastic parts are non-breakable and 1st Class CE certified ABS. Practical, easy installation.

... origin: Germany Manufacturer: RK Rose+Krieger Maximum load capacity: 10 kg (static) Optional reducing sleeves: round or square 20, 25, 30 mm Swivel range: 60° Tablet holder: from 125-200 mm Keyboard tray: Optional Support arms (optional): Load capacity: 10 kg, 25 kg, 5 kg (telescoping) VESA mounting plate (optional): 50 / 75 / 100...

... guides adjustable micrometer Winding device holder with the magnetic track in the event detection cell decasse. Mounting Tape with voltage control, and adjustable positioning guides the rollers. Positioning + or 0.1 mm servo motor 0,75 KW Cleaning system with a double face support roller on the output Storage formats tracked on a table with two anti static set before laguillotine and before the...

... surface, bridge handles on both sides, anti-thread wheels, and an anti-static system. The cart is made of galvanized steel. The total load capacity is 200 kg. Insertable accessories based on needs include: extension set, document holder pocket, and additional handles. Customize the cart if you have specific requests. Delivered as a flat-pack kit on a pallet. The standard leather cart with a wide...

...5 external pockets including 1 zipped on the left shoulder with a pen pocket, 1 back pocket with removable "security" strap, chest flap "security" and badge holder, 4 internal pockets including a phone pocket, detachable sleeves, side openings, adjustable cuffs. Composition: 63% polyester, 35% cotton, 2% metallic thread, anti-static, water-repellent Brand: Cityguard Manufacturer: Cityguard Origin: Not specified Fit: One size Dominant Color: Not specified Packaging: Not specified...

...Portable bag folder for 12, 24, 48, or 120 CD, DVD, or Blu-ray discs. Flip-through transparent pockets for anti-static and scratch-free storage. Zipper opening and closing. Made from textile-trimmed polypropylene material.

... wheels. Simple aluminum gun with swivel connection, 2.7 m of anti-static dispensing hose. Dimensions / weight / flow rate: 90 x 53 x 38 cm / 18 kg / 0.25 L / double operation. Keywords: cuvestockagedistributionessencesupersp...

...Adjustable anchor from small 560 mm to 160 x 1150 mm with ETA approval and static calculations...

...Roof Holder for -on Roof-Mounting- Terrace Roofs, Carports, and Conservatories The roof holder is designed for the retrofitting of conservatories, carports, terrace roofs, etc. It is vertically adjustable, corrosion-resistant, very easy to install, and can also be continuously adjusted for horizontal attachment to the supporting structure. Custom color options available upon request for an additional charge. Static calculations from the University of Applied Sciences Münster, Institute of Civil Engineering, Prof. Dr. Jan Vette are available. Germany: EU Weight: 3.2 kg...

.../rotation) Material details: 100% recyclable corrugated PP External dimensions: W. x L. NR Internal dimensions: W. x L. NR Number of feet: NR Number of blocks: NR Weight: NR Version: N/A Option: lid Static load: NR...

... 6005 A Pole diameter: 75 mm Pole height above ground: 5-8 m Weight per linear meter: 5, 6, 7 m: ~ 1.5 kg 8 m: ~ 2.0 kg Standard surface: Aluminum silver anodized, E6 Ev1 Material of arm: Aluminum Arm diameter: 20 mm Type of rotating arm: Hem finishing, telescopic Length of rotating arm: 1500 mm Adjustable from min. 1000 mm in 100 mm increments Standard pole top: Round aluminum, with arm holder...

...The FRM 700 turning and milling center features a stable 60° slant bed in a 70° column. It can be equipped with various power clamping chucks. A 12-station tool turret (VDI 50) for static or driven tools, hydraulic, self-centering tailstock, C-axis, Y-axis, milling head B-axis with tool changer, counter spindle, boring bar holder, chip conveyor, etc., make this machine a very powerful machining unit. Spindle speed: 1,800 rpm Spindle torque: 3,800.0 Nm Spindle power: 33.0 kW Control: CNC...

... protective frames. With static pre-wash and motor-driven main wash for targeted area washing (only 30% heating reduction during washing). Modules made of sturdy ABS plastic (UV-stable and temperature-stable up to 95 °C exhaust temperature) with highly effective active heat exchange area via screw-shaped, counterflow air guidance - without fans, motor protection, actuator, and control unit - pressure loss approx. 60 - 100 Pa - air flow rate 5,000 m³/h - 7,500 m³/h - Dimensions: approx. L1137 x W577 x H3065 mm - Weight: approx. 140 kg Weight: 140 kg Performance ratio: 1:100...

... information on request. Please consult us. Matter: REGULAR (pool palette/rotation) Material detail: 100% recyclable Dimensions w. x L.: NR Height: NR Internal dimension: NR External dimension: NR Number of soles: NR Number of blocks: NR Weight: NR Version: N/A Options: gates Static load: NR Dynamic load: NR Rack load: NR...

... 69881 (VDI3425 Bl.3) in all nominal sizes are also included. Custom holders are one of our strengths. If the right tool holder is not available despite the extensive range, we will find an economical solution for your manufacturing requirements with our considerable design and technical expertise.

...External dimensions: 649 x 816 x 845 mm Internal dimensions: 559 x 764 x 713 mm Payload: 300 kg Foldable (Height: 310 mm) Stackable (3/1 static – 1/1 dynamic) Self-locking handles 1/2 foldable door at the front 1 label holder at the front: 160 x 80 mm 2 side label holders: 100 x 50 mm on the box Empty weight: 27 kg Coating: electro-galvanized CR3 Ref: CONTFILP-MINI-INDUS External dimensions: 649 x 816 x 845 mm Internal dimensions: 559 x 764 x 713 mm Payload: 300 kg Empty weight: 27 kg...

... highly efficient. It allows for complete control over: sample positioning, needle selection and positioning, electronic syringes, tilt of the stage and sample holder, as well as various temperature chambers. It also enables the generation and execution of automatic measurement procedures. Thus, the automatic sequencing of measurements and video processing provide reliable, fast, and reproducible...

... with Label Holder • Containers are Accessible from Below • Sold Only in Full Packaging Units Volume: 620 l Weight: 57 kg Load Capacity: 500 kg Static Stacking Capability: 4 on 1 Dynamic Stacking Capability: 2 on 1 Item Number: 2330456502 Dimensions: 1200x800x950mm Length: 1200 mm Width: 800 mm Height: 950 mm Usable Volume: 593 Net Weight: 53.75 kg Pallet Volume: 2.4 m³ Pallet Length: 800 mm Pallet Width: 1200 mm Pallet Height: 2286 Packaging Unit: 6 Pieces/Pallet: 6 Label Holder: one long and one short side...

... manufacturers such as Index Traub; Mori Seiki; Gildemeister (Gital). With around 1,000 different tool holders (driven and static) for all common machine series and currently over 500 WFB adapter variants, we solve nearly all machining problems. The highest quality standards, long service life, and maximum flexibility of our products guarantee you economical production. Whether milling technology or turning technology. WFB – developed by us for you!