stamped strips

...Our special ability lies in the processing of metal strips pre-coated with adhesives. With this material it is particularly important not to damage the surface mechanically whilst at the same time not to impair the ability to bond. This skill enables us to supply stamped parts for bonding with rubber and/or thermoplastics, such as Vibration damping elements spring elements stabilizers functional parts components We guarantee a functional workability of the product for 6 months after delivery.

...and application requirements. • Stamping grids • Busbars • Bus bars • Conductor strips • Carbon guides • According to material specifications including surface coating • Also produced as an assembly in injection molding • Customized to customer requirements • Prototype production possible within a few days Surface/heat treatment: according to customer specifications Material thickness: 0.1 to 6 mm...

... equipped to be antistatic, electrically conductive, and flame retardant. PE foam is ideally suited for durable cushioning and protection against impact, especially in packaging applications. When equipped with antistatic properties (colored pink), it is used for packaging electrostatically sensitive devices. Delivery forms: - Sheets - Cut pieces - Contour cuts - Strips - Stamped parts - Construction parts - Rolls - Antistatic versions - Electrically conductive versions - Self-adhesive versions We are happy to advise you and...

... velocity, and the rubbery material strips the surface free from grease and cleaning fluid residues. It is the edge that counts! Just a like a car window wiper, it is the edge that counts. Normally, the wipers are stamped from sheet goods. During stamping, the elastomer becomes distorted; the inner edge is therefore not dimensionally stable and is at an angle. Only part of the edge wipes emulsions from the surfaces depends on the profiles. This edge is rapidly worn down; the cleaning action is then unsatisfactory. Streakfree cleaning ...

...We supply the material cellular polyethylene as block goods, sheets, or rolls, further processed into strips, stamped parts, molded parts, or milled parts, with or without self-adhesive coating.

... 100% control through vision systems ensures the high quality of the delivered products. The contact-stamped and bent parts and assemblies are made from copper, copper alloys, nickel, nickel alloys, steel, or stainless steel, as well as contact materials based on gold and silver. Additionally, our surface technology can electrochemically or chemically coat stamped strips and parts.

...We manufacture interleaving papers for your precision stamped parts that you want to rewind. Whether for stamped metal strips, etched metal strips, or for your strip galvanization. Interleaving papers for strip galvanization, precision stamped parts, etched metal strips, etc. 6-1,100 mm width 20-1,000 mm width Kraft paper / Kraft liner from 60 to 300 g/m² exactly according to your specifications. Our interleaving papers are tailored precisely to your application. They enable clean rewinding. Without tearing and without piercing the contacts.

...Our stamping department manufactures stamped strips and parts for a wide range of technical applications. We focus on optimal material usage and select the best manufacturing process and suitable machine for your project. We process all common materials such as: aluminum, bronze, brass, copper, stainless steel, spring steel, cold rolled strip, hot rolled strip... Subsequent surface finishing (e.g., zinc, tin, gold, silver, etc.) or finishing of stamped strips with subsequent separation completes our stamping portfolio. We also offer post-processing services, such as welding pins, in-house.

...Filigree stamped and bent parts of the highest quality is our specialty. Constant quality control of the stamped parts is one of our most important principles. From steel: • rust-resistant spring band steel (1.4310, 1.4404, 1.4301, etc.) • cold strips (ST01/02, etc.) • hot strips • untempered spring band steel • hardened spring band steel (C60 / C67 / C75 / C100) From non-ferrous metals: • beryllium • copper • brass • tin bronze • nickel silver • titanium • nickel • tombak • zinc • and more - please inquire From aluminum: • raw • anodized...

...Parts for electronic devices for hot water supply, e.g. connection bridges, terminals, strips, and grounding safety clips for instantaneous water heaters made from various brass and copper materials.

...In our modern machinery park, we process nearly all types of metal; from slit strips (coils) to flat steel and sheet metal. We punch according to your individual specifications. In our modern machinery park, we process nearly all types of metal; from slit strips (coils) to flat steel and sheet metal. We punch according to your individual specifications; simply provide us with your idea, ideally...

...Processing of cold and hot strips as well as non-ferrous materials up to 8 mm thickness into stamped, pressed, and drawn parts. Stamping Machines: A wide range of more than 16 precision stamping machines with pressing forces from 500 to 8,000 kN and various designs offers opportunities to meet demanding customer requirements in forming technology. Processing: All common cold and hot strips as...

...Strips, cuttings, sheets, stamped parts, self-adhesive on one side or non-adhesive.

... with FDA CFR 21 §177.2600 and EC 1935/2004 regulations, MVQ fabric-reinforced silicone sheets are excellently suited for applications in contact with food. Available from stock in reddish-brown, standard width of 1000mm and the following thicknesses: 2mm, 3mm, 4mm, 5mm, and 6mm. Further thicknesses and colors available upon request. Our silicone sheets are available with or without self-adhesive backing, as rolls, or can be cut into strips, flat rings, seals, stamped parts, and as custom-made items.

...Due to the excellent properties of wool, manufactured technical felts are still used today in many modern industries— for example, as sealing felt, lubrication felt, primer felt, or as insulating felt, such as for sound insulation in vehicles. With our extensive machinery and technical capabilities, we are able to meet the diverse needs of our customers and offer customized felt products. Starting from simple cut parts and stamped parts, such as felt rings or felt strips, to special felt components according to customer specifications, we can provide a wide range of finished felts.

... • highly elastic • very durable • high-quality appearance • pleasant tactile feel • grammage available in a wide range • flame retardancy according to FMVSS or similar standards possible • anthracite or colored upon request RAW MATERIAL • Roll goods up to 1,200 mm in width and up to 400 m in length (depending on material thickness) CUSTOM FABRICATION: • Cut pieces • Strips • Stamped parts, kiss-cut stamped parts • self-adhesive coated • Water jet parts • Narrow rolls starting from 4 mm in width and up to 50 m in length...

...Sheet metal parts made of steel, stainless steel, aluminum, and spring steel from 0.3mm, laser / stamped parts up to 25mm, bent parts / profiles / rails / sides / strips / gutters, panels / front plates / covers Sliding / protective / ventilation sheets Sheet / profile frames Hinged parts / latches / tongues Trays / containers / steps / treads Lighting sheets / lamp sheets Sliding sheets Mounting plates...

...Deburring system for stamped parts, sintered metals, ceramic pads, sheets and strips, coils, and metal sheets.

...For the coating of full strips, stamped strips, and semi-finished products, we utilize our modern strip systems. Through selective processes such as adhesive tape, dipping, or brush techniques, we can meet the wishes and requirements of our customers and guarantee the highest selectivity for optimal consumption of precious metals. Strip thickness up to 1mm Strip width up to 100 mm Coil weight up to 1000 kg Reel diameter up to 1200 mm Options for coatings in strip galvanization: Gold (AuCo) Silver Copper Ductile nickel Bright nickel Matt tin Bright tin Passivation (metallic/organic)...

... the form of strips, assembled units, in special packaging, or fully automated in trays. Years of development and manufacturing experience enable us to offer individually optimized tooling solutions. We place great emphasis on personal contact and short communication paths with our customers.

...Our stamping shop operates with eccentric and hydraulic presses as well as stamping machines with a capacity of up to 200 tons. We process strips with a thickness of 0.1 to 5 mm and a width of up to 320 mm. Various qualities of steel and stainless steel, non-ferrous metals, and plastics are used in the process. Of course, we also offer all common hardening processes and coatings for all our...

...In our small series production department, we manufacture for you using modern eccentric presses with a capacity of up to 55 tons and hydraulic presses with a capacity of up to 100 tons, as well as thread cutting machines with lead screws M2-M10 and small bench drilling machines. We process strips ranging from 0.10 to 3 mm in thickness and up to 220 mm in width, and additionally, we also work with strips made from sheet material. We also produce stamped parts from plastics here.

... transport goods such as drives and gearboxes. The motor technology sector often relies on our disposable packaging with PP ribbed plates. For motors and pumps, for example, these are often the suitable packaging solution. Reusable packaging made from polypropylene ribbed plates proves to be very useful for users in the long run. Companies in the mechanical engineering sector transport and store their stamped and pressed parts in them, among other things.

...With our machinery, we are in the EMS Champions League. With our in-line special assemblers, we are capable of pressing electromechanical components into the circuit board. The joining process is monitored with 100% force-path measurement, and the pressing tolerances are within a few hundredths of a millimeter. We excel at stitching contact pins, terminal strips, and other stamped parts with a...

...Materials: EPDM - Ethylene-Propylene-Diene Rubber, CR - Chloroprene, NR - Natural Rubber, NBR - Acrylonitrile-Butadiene Rubber, PE - Polyethylene, PU - Polyurethane Execution - Stamped parts - Strips - Sheets - Roll goods - Block goods with and without adhesive surfaces in various densities and thicknesses...

...We have a large selection of bubble foam in various bubble heights in the color anthracite constantly in stock. However, we can also produce custom bubble heights from different PU foams/colors for you—also available in antistatic or electrically conductive foams. All bubble foams can also be equipped with self-adhesive backing or can be glued with cardboard, etc. Also available as cut pieces, stamped parts, strips, etc.

...With our 12 eccentric and hydraulic presses, boasting up to 100 tons of pressing force, we are your specialist for small to medium-sized series of stamped parts made from a variety of materials. In addition, we also manufacture your deep-drawn parts on our hydraulic presses, accommodating part diameters of up to 400 mm. Material feeding can be done from the roll, in strips, or as individual...

... strips for plugs and connectors or stamped parts, we offer a wide range of different materials and surfaces that are appreciated globally and used by leading manufacturers in Europe, America, and Asia. We always guarantee user-oriented solutions that are tailored specifically to you. With the cornerstones of functionality, appearance, and reliability, we have proven ourselves for many years, ensuring...

... of our more than 100 employees, who, with great commitment, years of experience, and technical know-how, meet the highest demands for precision and quality every day. Our products: spacers, tuning plates made of plastic and metal for all industries, fitting washers, precision stamped parts, stamped parts, metal foils, self-adhesive metal foils, contract manufacturing of mechanical assemblies, engine mounts, peelable fitting elements, 2-D laser processing, precision assemblies made of sheet metal.

...MOLLIFICIO F.LLI PAGNIN produces springs for all industrial applications in every type of material, working in compression, tension, torsion, and helical forms, according to RINA ISO 9001:2015 standards in wire and strip. Additionally, we manufacture stamped and bent metal components, based on designs. They are precise, punctual, and reliable in their deliveries. MOLLIFICIO F.LLI PAGNIN is located at via Guglielmo Marconi 10/A in Selvazzano di Trento- Caselle (PD).