stainless steel motor

...High flow Robust construction Reliable sealing Easy installation High-quality material Technical specifications: FSA motor ball valve body stainless steel 304 1" 2-way PN 40 Bore diameter: 20.0 mm Temperature: -30° to 120° C Thread: G-thread Pressure: 10.0 bar Kv value / Cv value: 12.90 / 15.00 Weight: 508 g Seal: EPDM...

...Vertical stainless steel multi-stage pumps in line Liquid temperature: -20°C to +120°C Nominal flow rate: 32 m³/h Maximum pressure: 28 bars pH range: 4 to 10 Motor IE3 motor Protection class: IP55 Maximum ambient temperature: +40° Application Transfer of low-viscosity liquids that are non-flammable and non-explosive, containing no solid particles or fibers. These liquids must not chemically...

...Rob. 3-Way Ball Valve PN 63 Stainless Steel 316 + Pneumatic Actuator Actreg Dimensions: 1/4’’ to 2’’ Connection: BSP threaded Fluid Temperatures: -30° C / + 180° C Ambient Temperatures: -20° C / + 80° C Compressed Air Motor: min 1 bar / max 8 bar Actuation: Double and single acting Certification: ATEX Zones 1, 2, 21, and 22 Material: Stainless Steel Pneumatic Actuation: 1 bar Maximum Supply Pressure: 8 bar Minimum Outdoor Temperature: +0° C Maximum Outdoor Temperature: +80° C...

... obtain a pumping solution for your entire distillation process with just one pump. More than 600 pumps of this type are reliably operating across a wide range of cannabis applications for many of our US customers. This robust and reliable pump series is used worldwide in demanding processes within the chemical and pharmaceutical industries. Actuation: with electric motor Self-priming: yes Technology: external gear Application area: for the chemical and pharmaceutical industry Other features: for pharmaceutical applications...

...5 grease filters with labyrinths (500x500 mm) Version with built-in "sealed" centrifugal turbine (IP55), low energy consumption "Energy Saving" Electrical housing (central position, vertical). Fully made of AISI 441 stainless steel, assembled by spot welding. Grease filters with labyrinths made of AISI 430 stainless steel. Peripheral trough for grease collection, equipped with a...

...-400V) - Shut-off valve gearboxes - Double eccentric shut-off valves Nominal sizes: DN25 - DN1200 Flange connection: PN6, PN10, PN16, ANSI 150 Length: DIN EN 558-1 Series 20 Disc: Stainless steel, GGG40, WCB Disc seal: EPDM, NBR, PTFE, FPM/FKM - (Viton) Pressure rating: PN6, PN10, PN16, ANSI Class 150 Actuation: Electric motor, Pneumatic double-acting, Pneumatic single-acting, Hand lever, Gearbox...

...Stainless steel motors are used in sanitary areas such as in the food and beverage industry or in the pharmaceutical sector. The smooth surface of the motors is designed in accordance to the EHEDG guidelines to avoid dirt accumulation. To ensure longlasting and lowmaintenance operation, critical components such as bearings and seals are specially tested. Due to an extensive stock of motor...

...The "INOX motors" feature a motor body made entirely of AISI304 stainless steel. Upon request, it can also be made in AISI316. The standard configuration includes a power cable already connected, L=1m. Upon request, a rear terminal box, also in stainless steel, can be provided. The joints are fully sealed to ensure an IP66 protection rating; upon request, a front labyrinth seal is available for...

...Submersible pump for clean or contaminated water. Can be used as a backup pump in case of flooding. Allows for the suction of residual water down to 5 mm thanks to its removable suction strainer. Maximum liquid temperature: 35°C Motor: Single-phase 230 volts Connection cable: Length 10 meters Weight: 11 kg...

...Specifically designed for the requirements of the food industry, we developed our low-play stainless steel gearboxes based on the EPL series. Key features: complete stainless steel construction protection class IP66 lifetime lubrication with food-grade grease low backlash low moment of inertia high torsional rigidity high dynamics integer gear reductions high torque transmission honed gearing coaxial arrangement of input and output shafts easy motor mounting any installation position...

...Wet/Dry Vacuum Cleaners with Large Container and Powerful Dual-Motor Suction Stangl StaVac vacuums are compactly built, powerful commercial vacuums designed for daily maintenance cleaning. Integrated accessory storage, a solid rear axle, two front swivel casters, and versatile standard accessories ensure high user-friendliness. The StaVac 80 Profi model features a practical, tiltable metal dirt container.

...Stainless steel electronic products mechanical parts.

...2 side sealing bars lenght 600 mm, vacuum pump 40 m3/h. Also available with MAP - Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V...

...Construction stainless steel 304 L. Electric cart with batteries 2 x (12 V – 20 Ah) + charge indicator. Mini charger 24 V 4 Amp 4 non-marking handling wheels, including 2 swivel wheels with brakes Ø 125 mm at the back, and 2 fixed Ø 80 at the front, as standard. Control box for lifting/lowering on a flexible cord. Protection class IP 65. Capacity rated for a load at 600 mm from the mast. Lifting...

...ADDITIONAL INFORMATION The filling cart includes * 1 stainless steel cart with 2 fixed wheels & 2 swivel wheels * 1 provision for transporting the gas bottle (not included) * 1 stainless steel 316 drum of 50 liters, pressurizable (max 10 ATM) * 1 pressure filling kit for the drum * 1 regulator to connect to the neutral gas bottle * 1 distribution lance with flexible hose and clamps Mobile cart designed for the supplementary filling of all containers, specifically for aging drums. Reference: D6042 Capacity: 50 liters...

...Self-priming stainless steel pump with single/double-acting mechanical seal - The UP series is designed for a wide range of applications and is perfectly suited for pumping tasks in stainless steel systems as well as under high thermal stress. Materials: Stainless steel 1.4581 Maximum flow rate: 460 l/min Maximum delivery height: 39 m Motor power: 0.18 - 5.5 kW Advantages: » available with...

...This standard tank from our stock has been fitted with a custom agitator. The agitator was equipped with a frequency regulator and additional cooling for the motor.

...Slow agitators are used to keep any type of liquid mixture (such as ceramic slurries, clay milk, paints, glazes, etc.) in suspension within suitable tanks. All agitators are equipped with blades of varying shapes and numbers depending on the tank in which they will operate, and a gear motor with a very high reduction ratio. The blades ensure the slow and continuous movement of the hydro-suspension to prevent the settling of materials that need to remain in suspension.

...Ventilated pressure tank cap made of plastic or plastic and stainless steel, available in three different versions: - passage diameter 30 mm - passage diameter 33 mm - passage diameter 40 mm The profile of the pressure cap spout is directly derived from the molding of the tank. This product is mainly used in the tanks of cleaning machines and environments such as pressure washers, floor scrubbers...

...Bearing block and carriage aluminium alloy. Guide column and threaded spindle stainless steel. Plain bearing for guide columns and spindle nut highquality special plastic. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Stainless steel hardened and ground. Threaded spindle with ball bearing. Note for ordering The unit is supplied with the position of...

...Custom Auto Shaft 1. All Custom Auto Shaft is produced according to your CAD and 3D drawings or sample. Please send the blueprint or drawing artwork first, and we will offer our quotation to you ASAP. 2. Materials: Copper, Brass, Phosphor bronze, Beryllium Copper, Aluminum, Stainless steel, Carbon steel, and Iron. 3. The surface finish of the Precision Stainless Steel Machining...

...China CNC Turned Parts Manufacturer custom produce all kinds of turned parts according to customer's drawing or samples, we can produces stainless steel Turned parts,carbon steel Turned parts, aluminum turned parts,brass & copper turned parts. Specialize in producing stainless steel motor shaft eccentric shaft knurled shaft precision parts China If you are interest in our CNC machining services, please feel free to send inquiry to us, and then our professional sales manager will get back to you ASAP! sales@mxmparts.com WhatsApp +86 13780014913...

... eliminated. By directly measuring the position at the output shaft, high positioning accuracy is achieved. The galvanically isolated supply voltages for control and power electronics enable the easy implementation of an emergency stop function without interrupting bus communication. Nominal torque / nominal speed: 1 .. 5 Nm / 210 .. 40 rpm Protection class: IP 65 Material: Stainless steel housing Design...

...DC 12V Mini Diesel Water Oil Fuel Transfer Pump - Truck Boat Submersible Motor Stainless Steel 38mm Car Vehicle Oil Pump...

... stainless steel and/or hexagonal aluminum with internal reinforcement - 4mm wall thickness. HPL panels: Outdoor quality, 13mm wall thickness, anti-UV and anti-graffiti treatment. Brown floor panels made of 15. Fasteners: Stainless steel screws (uniformly 10 mm in diameter), theft-proof and vandalism-resistant. The nets: Made of reinforced Hercules steel cable with 6 strands and polyamide yarn coating. Connections and cable shoes: and QUALI-Cité® design polyamide connections and thimbles. Slide: Maximum platform height of the slide 1.50 m made of stainless steel or Starboard®.

...P-1001 wall mounted cooker hood combines sophisticated design and the latest technical innovations. Serial and bespoke manufacturing. This model can be equipped with a motor up to 1675 m3/h. Professional stainless steel filters, LED lighting, remote control, and specially custom-made flues. 100% European manufacturing.

...7153 HAND DRYER MACHINE WITH JET MOTOR AND PHOTOCELL (STAINLESS STEEL) - Automatic Sensor Hand Dryers...

FMH Conveyors is the world's largest manufacturer of loading and unloading conveyors and mobile conveyor solutions. FMH Conveyors International, the European branch of FMH Conveyors, develops, manufactures, installs, and maintains ergonomic equipment for bulk loading and unloading as well as for the transport and distribution of products throughout the entire supply chain process. FMH Conveyors ...

... are also available with zero voltage reset. Motor drive: Actuating force: 800N; Motor voltages: 24V AC/DC, 230V, 110/120V; Control: 3-point; (0)2-10V; (0)4-20mA Nominal diameter: DN 15 - DN 50 Nominal pressure: PN 40 Materials: Stainless steel 1.4408 Temperature: -30°C to +220°C; Connections: Whitworth pipe thread; NPT thread Application: Gases, vapors, liquids Protection class: IP65...

... installed capacitor Insulation class F Three-phase power supply 230/400V 50Hz with user-provided protection Pumped liquid temperature up to 50°C Pump body: AISI 304 stainless steel Support: aluminum alloy Motor shaft: AISI 416 stainless steel Impeller: Noryl® or steel upon request Diffuser and Venturi system: Noryl® Protection rating: IP44 Maximum operating pressure: 6 bar...