small steel parts

... products are widely used in construction machinery and equipment, coal mining and power transmission industry in more than 30 countries. We sincerely welcome friends from all over the wold to visit us and cooperate with us! Material:carbon steel, stainless steel, brass Surface Treat:galvanize Yellow Zinc, Black Zinc, Nickel Application:widely used in the hydraulic and fluid conveying system of...

... Directive DGRL or KTA or RCCM or ASME/ASTM. Example: high-alloy nickel-chromium-based high-performance steels from the NiCrMoV group such as 1.6959 and similar. Die forged blanks: up to 130 kg Maximum length: 600 mm All steel grades (formerly: steel qualities): heat-treated steels, nickel-based, chromium-vanadium, molybdenum, alloyed, unalloyed, corrosion-resistant Special steels: titanium...

...We manufacture die-cast parts, stamped parts, deep-drawn parts, turned parts, milled parts, and contact springs, both as small precision components and large parts. The produced metal parts can be completed with sealing elements, threaded inserts, and bearing bushes. We also offer cold pressing processes and cost-effective surface finishing. We support our customers throughout the entire project process, organizing tool and sample production as well as manufacturing (including surface finishing) and optionally the assembly of series parts.

...All kinds of customized parts made by steel for different industries.

...Our team of qualified welders can weld large components and also highly complex small parts of steel. Welding methods: - MIG-MAG and TIG (WIG). Capabilities: - We own a workshop hall of 6.000 sqm. - With cranes capacity of up to 50 tones. - Stress relieving treatment - Thermal or Vibrations. We ensure all of our products meet the highest standards through rigorous quality checks: - Penetrating liquids, magnetic powders, or ultrasonic tests, if needed. - Geometrical control in place with laser tracking.

...Seaming chucks and rolls made from tool steel are generally considered the industry standard for can factories, while canneries generally use stainless steel. Other types of steel are commonly used in the production of seaming chucks for Easy open covers, especially for those chucks that suffer from a weak chuck lip.

... economical for small parts due to cost reasons. The Stalder team focuses on specific refinement in the drum. With these processes, tiny components such as rivets, nipples, screws, nuts, bolts, or turned parts can be processed in large quantities more economically. Bulk materials enter the drum during pre-treatment and undergo the most efficient process until final assembly. This allows for the refinement of hundreds of thousands of parts daily. Additional modules for further process steps offer a whole.

...We manufacture custom parts, cleanly welded and electro-polished according to drawing. Single pieces or small series are also possible.

...We produce handles suitable for a wide range of applications, including ovens, refrigerators, hoods, and small appliances. We use materials such as thermosetting plastic and metal, and offer various finishes, from brushed steel to a 'soft touch' effect, as well as aluminum and brass. We can also create finished products by combining components made from different materials and finishes through bonding or mechanical assembly.

...Phosphating is another one of our steel coating processes, although unlike phosphating, it does apply a small superficial layer of a few microns. The purpose of this coating is to achieve a rough finish to allow for painting over the material, but it can also act as an antioxidant if a protective grease is added after the bath. The phosphated coating has several uses. The main one is corrosion...

...The new 3 and 5-axis CNC milling machines allow us to produce complex parts of excellent quality. We machine parts made from ordinary steel, stainless steel, aluminum, cast iron, and brass. The maximum dimensions of the machined part are 1200 x 600 x 600 mm, and for 5-axis machining Ø 320 mm. The maximum weight of the part is 1000 kg. The company also has universal milling machines used for the production of small series of details, instrument repair, and the fabrication of unique parts.

...Optimal handling due to compact design Very low consumption For hard-to-reach areas Small and powerful No power connection needed, as it operates pneumatically Maintenance-free For cleaning injection molding tools, equipment, small parts, circuit boards, ...

...Parts for Steel Machine Builders - Medium dimensions...

...Pinions are gear wheels with a small number of teeth that mesh with a larger gear called a "cog". It is a type of gear used in various mechanical systems to transfer motion or power from one component to another. Pinions, like other gears, can be made from a variety of materials, such as steel, brass and plastic, depending on the requirements of the application.

...Our turned parts are characterized by the highest precision and quality, manufactured on state-of-the-art CNC single-spindle and multi-spindle machines. With diameters ranging from 3 to 65 mm, we offer a wide range of precision turned parts that can be produced in both small and large series.

...Wire bent parts according to customer specifications ✓ Wire diameter from 0.1 mm to 26 mm ✓ State-of-the-art CNC manufacturing ➤ Find your technical solution now! Lesjöfors manufactures wire bent parts both as prototypes in small series and in large quantities on state-of-the-art machines. Our CNC-controlled bending machines enable cost-efficient and flexible production of complex parts with minimal tooling effort. Our material range includes all common materials suitable for the production of wire bent parts.

... laser into the desired contour. This process is continued on a revolving basis until the workpiece is complete with the final geometric form and the relevant functional properties. Incidentally, we reclaim excess powder material during this process and use all of it for later productions again. Our services in sample development also include technical springs, which we produce in small batches for your sample application. Traditional sample development services are a new addition to our portfolio. Here, we produce a small-scale series of your bent strip parts from original materials.

... / Lower Guides • Wheel Set Bearing Covers • Lubrication Containers • Lower Pivot Pin Carrier • Lower Spring Hook Stone The parts listed above are just a small part of our manufacturing program. If you haven't found what you're looking for, simply send us your inquiry. We can also manufacture sizes outside of standard specifications upon customer request.

... capabilities allow us to handle a wide range of project sizes with ease and accuracy. When it comes to material thickness, our laser cutting centers excel. We can effortlessly cut through steel up to 25mm thick, stainless steel up to 20mm thick, and aluminum up to 15mm thick. This versatility enables us to accommodate various project requirements and deliver precise results every time. With our cutting-edge laser technology and skilled team, we ensure that every component we produce meets the highest standards of quality and precision, meeting the diverse needs of our customers across industries.

...The fire dampers are manufactured in the following nominal sizes DN100, DN125, DN160, DN200. The fire dampers are equipped with a thermal fuse mechanism ensuring the damper switch to the safe position in case of reaching an ambient temperature equal to or higher than 72°C. The fire dampers allow using limit switches signalling closed position of the damper blade (1 limit switch) or blades (in case of using 2 limit switches). The casing is made from galvanised steel sheet; the fire damper blade is made from a silicate cement board.

...We manufacture electrical steel laminations for the construction of magnetic cores in the form of rotors, stators, or transformers. To produce the laminations, we use state-of-the-art fiber lasers. We cut stator and rotor sheets up to a maximum diameter of 1,000 mm. Our laser-cut laminations meet the highest quality and tolerance standards and are particularly suitable for the production of prototypes and in small series production (1-10,000 individual laminations).

...An important machining method at ZERMOTECH is milling. We have several multi-axis machining centers available for this purpose. In milling, the rotating tool moves along the desired contour of the workpiece, or the workpiece is additionally moved according to the requirements. Our milling operations are carried out with vertical machining centers that are CNC-controlled and equipped with automatic tool changers. These machines enable us to manufacture custom parts as well as small and medium series.

... equiped cold forging & hot forming production line, can produce blanks for our steel turned parts, greatly reduce the material cost, improve the processing speed and cost, improve the quality of the workpiece. According to quantity & precision requirement, optimize the turning processes to make the machining cost to be lowest. We produce turned parts from raw materials of bars,tubes,forged blanks...

...It can't be challenging enough for us, because our employees love a challenge! Especially when it comes to geometrically complex, core-intensive, or double-walled cast parts. This is where our expertise lies, both in the production of small series and in the reliable manufacturing of single castings and prototypes.

...We specialize in stamped parts weighing from 0.05 kg to a piece weight of 150.00 kg. Both small series and large batch sizes can be produced economically with us.

...We paint your mass-produced small parts made of metal, plastic, wood, or glass.

...Small Parts with Plugged Threads The plugged threads ensure that the interior of the thread is not coated with powder during the coating process, allowing for trouble-free assembly and functionality of the thread. The small parts are available in various designs and can be used for a wide range of applications, such as in the automotive industry or mechanical engineering. The powder coating provides the small parts with a uniform and durable surface that protects against corrosion and wear.

...Powder Coating, For the past 10 years, we have been utilizing the technology of plastic powder coating. With our small parts coating system, we are able to cover all RAL colors.

...We process everything from large to small parts. Tumbling / mass finishing means: -avoiding inefficient manual labor -saving time -achieving top results quickly and cost-effectively -smoother surfaces/edges on the workpiece, thus requiring less rework. In tumbling, also known as mass finishing, the workpieces are set in a rolling motion with the abrasive media in the working container. The friction with the abrasive media grinds the workpieces, and by choosing the right machine and media, the surface finishing can be controlled to achieve the desired result.

...In our coating facility, we perform wet coatings. We can produce all RAL colors, DB colors, and also special colors like NCS. Due to manual processing, we can coat small series and individual parts as well. We can easily handle various dimensions up to a size of 5 x 5 x 11 m. If larger workpieces need to be coated, we will find a solution for you.