test laboratory

... - looking for international agents to help us successfully distribute this across Europe and the Middle East. Invisio has a tableting facility and makes blank or placebo tablets for packaging manufacturing companies and pharmaceutical companies to test their packaging machines prior to running with active pharmaceutical agents. Lab scale development of IR or CR tablets can be performed now. Preferred supplier to the NHS in the UK. Established in 2016, we seek, source, store and supply. Invisio - inventive, Visionary, Intuitive - your partner of choice.

... facilities. The key to success and sustainability is to get us involved early in your project. We are a UKAS accredited testing laboratory (No.1833) with nearly 30 years experience in the conformity assessment business, Cranage has acquired a thorough knowledge of the standards, regulations and product approval requirements of many countries around the world. Using a UKAS accredited lab gives...

... privately owned, independent, and accredited testing laboratory with over 25 years of experience, offering you the following laboratory services: • Asbestos analysis: material, dust, air, and liquid samples according to current standards such as VDI 3866 Blatt 5, VDI 3492, BIA/IFA 7487 • Testing for respirable WHO fibers • X-ray microanalysis according to ISO 22309 • Image generation via SEM...

Explosion Hazard Testing Ltd carries out a full range of dust explosion and dust ignition tests to UK, EN, ASTM and ISO standards. Tests include Kst, Pmax, MIT, LIT, MIE, LOC, self heating, powder resistivity, UN classification, auto ignition temperature, flash point and flammability limits in air.

Fit to Fly PCR and Antigen Test Kent. We offer guaranteed results starting with same day results with a 3 hour turnaround time. All PCR tests are carried out on site in our laboratory. We guarantee that within minutes of receiving your test sample, it is taken into our laboratory for immediate testing. A Fit for Fly certificate will be emailed to you with your test result that you will need to...

... Fluid system testing. The Calibration Laboratory houses traceable and UKAS accredited flow rigs, for gas flow, air flow, water flow, oil flow, fuel flow, air velocity, pressure, oxygen clean pressure calibration, temperature, humidity, electrical, mass, torque and acceleration. The Thermal Fluids Test Laboratory houses calorimetric heat exchanger wind tunnels and component test rigs for burst...

York EMC Services is a leading, independent provider of Products and Services that enable manufacturers to get their products to the Global Market in the quickest, most cost effective manner. Laboratory testing: Three UKAS accredited test laboratories located near Bristol, Grangemouth and Leeds, provide easy access for manufacturers throughout the UK. These facilities offer, amongst others...

... solutions, and with their expertise and team of dedicated staff, Woodley Equipment has quickly become one of the world’s leading medical equipment suppliers. Today's pharmaceutical environment depends heavily upon technologically advanced equipment in order to accurately and reliably test the latest drugs and their effects. With constant technological advances and the high capital outlay involved, it can often be difficult to decide what products will provide longevity and value for money. Woodley Equipment Company can offer an alternative solution.

...GEOINVESTIGATE can provide a fully integrated total site investigations service. We acquire data and provide factual information and records such as borehole logs, soil samples, site monitoring records, laboratory test results or factual reports. Our geoscientists offer investigation services tailored for most types of geo-development. Engineering Geology & Geotechnical Engineering: foundation...

...We provide exceptional private healthcare laboratory and consultation services including blood and swab sampling for COVID-19 fit to fly PCR tests, Test to Release, Rapid Antigen tests and COVID-19 IgM/IgG antibody testing. With us, results and certificates guarantee within a day for all your covid-tests...

... • Digital load cells • Dosing scales • Through scales • Stainless steel scales • Moisture analyzers (with infrared, halogen, or DRS dryers) • Semi-micro scales • Industrial scales (standard up to 6 tons / accuracy 100g) • Inventory scales • Precision scales • Parcel scales • Pallet scales • Platform scales • Test weights • Stirring scales • Laboratory scales • Low-cost scales • Micro scales...

... interconnectivity and automation to ease the operation and management within telecom/datacom testing laboratories. Our services include: - Interoperability testing - RMA - NPI - Test System Service Solution - Laboratory Operating System We operate in a highly-controlled environment where our infrastructures are ESD safe and our cleanroom is ISO class 5 certified to ensure the highest quality...

... aging), product compatibility tests, determination of PAO (period after opening), microbiological quality, challenge test, and sun test). Quality Management System: Implementation of a quality management system, GMP (Good Manufacturing Practices), advice on ISO 22716 certification). Regulatory Services: Preparation of Technical Data Sheets / MSDS, conformity assessment, preparation of the PIF...

Optimum Test operates in accordance with the TS EN ISO 17025 Laboratory Management System criteria. In addition to providing services in various areas with its own laboratory, it also collaborates as a partner with many global laboratories both nationally and internationally. One of our primary goals is to create added value in the technological and industrial development of our country by...

Consulting and sales of high-power electronic equipment, especially for testing systems, test benches, production lines, research and development laboratories, engineering faculties in universities, and certification bodies. Supply of programmable power supplies, bidirectional and unidirectional, three-phase network simulators, battery cyclers for electric vehicles, testers for electric and...

The company OCME, founded in 1992, is a testing laboratory available to public services, engineering offices, study and control agencies, architects, contractors, real estate agencies, manufacturers and importers of materials, quarry operators, grass and gravel operators, and private individuals—in short, anyone involved in the construction sector.

... materials, fine bars, as well as finding recycling pathways for industrial materials. For example, stamping waste, thermocouples, and contacts with precious metal coatings. Thanks to our own analysis laboratory, we are able to test incoming materials in the shortest possible time and examine their exact composition.

... Through our flexible frame construction, we are capable of mastering even very demanding tasks in electroplating. Two company locations ensure good accessibility and customer proximity. We ensure the quality of our products through extensive testing procedures in all areas of production. In our own laboratory, we test workpieces in a salt spray chamber according to DIN EN ISO 9227 for their corrosion...

... state-of-the-art light microscopy, we conduct examinations in a cleanroom according to VDA19 / ISO 16232, based on the requirements of your customers and in accordance with the drawing entries, CCC component cleanliness code. ISO 17025 ensures the reliability and comparability of our results. - Creation of a test specification / decay measurement - Residual dirt analyses - REM-EDX material analysis - Examination of components weighing up to 3000Kg - Monitoring of production / particle traps - Determination of gravimetry...

We are an independent testing laboratory for lead batteries (Flooded, VRLA, SLA, AGM, GEL, EFB, EFB+, SLI, Pure Lead Batteries, PzS, PzB, PzV, OPzS, OPzV). We test lead and lead-acid batteries according to applicable standards (from both automotive manufacturers, battery manufacturers, and international standards) (VW 75073, EN50342-1, EN50342-6, EN60896-11, JIS, EN61056-1, IEC60254-1...

... to deburr (remove residual burrs) components made of rubber, plastic, and non-ferrous metal parts. With the MEWO manufacturing facility, we have the opportunity to directly support machines and systems, and we also have various options for special applications or short-term test series available. This way, we can often deliver the desired deburring result under series conditions even during a...

... Akkreditierungsstelle GmbH DAkkS, ZLS, ZLG, KBA, BNetzA, and IEC/IECEE. We are a recognized CB testing laboratory (CBTL) and national CB certification body (NCB) in the CB scheme of IECEE, an international system for the recognition of test results. SLG was founded in 1992 by three shareholder families. We see ourselves as a dynamic, expanding company, working innovatively on behalf of our customers. Always...

...). With its multidisciplinary and experienced team, EXTRACTIS offers original fractionation strategies for all types of plant raw materials, co-products, or fractions, and evaluates innovative technologies through an in-depth understanding of plant materials. EXTRACTIS PRODUCTION provides its services for the realization of industrial pre-series for test markets and custom production of ingredients...

... Center stands for mobile and stationary materials testing and a technically and organizationally modern materials testing laboratory. In addition to acceptance tests with all acceptance bodies, the issuance of test reports, and the execution of damage analyses, TPW Testing Center offers you a wide range of specialized services such as the preparation of expert opinions and engineering services...

... plants, testing of welds and pipes, testing of fasteners, as well as component testing for mechanical engineering. When it comes to material testing, we are your right partner. With over 25 years of experience in destructive and non-destructive material testing, as well as material inspections, we offer you, as an accredited testing laboratory, all tests according to national and international regulations. Immediately after the completion of the material tests, you will receive your test report from us via email. Fast, straightforward, and tailored to your needs.

... (Federal Institute for Risk Assessment). For the analysis of various parameters, we can draw on the extensive analysis portfolio of the Eurofins group worldwide, allowing us to offer different tests from a single source, such as laboratory analytics, microbiology, suitability tests, consumer studies, etc. Through our ISO 17025 accreditation, we ensure reliable and precise test results, which is...

...-ray fluorescence analysis, coulometry, titrations, asbestos analysis, carcinogenicity index, artificial mineral fibers, formaldehyde determination, mold analyses, polymer analyses, soil and waste analyses, building material analyses, steel analyses, non-ferrous metal analyses, emission spectrometry, surface tests, coating thickness measurement, corrosion tests, damage analysis, test certificates according to DIN EN 10204, calibration laboratory (DKD) for material testing machines, accredited according to DIN EN ISO 17025:2000.

... 8062 General tolerances - DIN ISO 2859-3 Acceptance sampling inspection Further standards (e.g., your company standards) will be adhered to upon submission of the standard description. Quality Assurance - Melting analysis using vacuum testers - Melting analysis using thermal analysis - Hardness testing according to Brinell - Initial sample inspection reports will be created upon your request - Test certificates upon request according to DIN EN 10204 - Leak testing, if required - External tensile strength testing - External X-ray testing - External metal analysis for factory certificate 3.1...

The TELUS Test Laboratory for Environmental Simulation GmbH is a company founded in 1998, originating from DaimlerChrysler Aerospace AG. Under this name, more than 30 years of experience in the field of environmental simulation are consolidated. The tasks and requirements from the aerospace sector have led to the development of expertise since the 1950s, which we can now offer to our clients. A...

... of the few companies in Germany that operates its own DAkkS laboratory (German Accreditation Body). To continuously develop current standards and measurement procedures, we explore new paths in measurement and testing technology for gases and liquid media in collaboration with partners from science and academia, and maintain a close cooperation with the Physikalisch-Technische Bundesanstalt in Braunschweig.