Results for

Service Provider - Plastic injection molds

30 Companies

74 Products

Product recommendations

Turkey

Portugal

China

Portugal

See more products

MATRIZ JUBILANTE UNIPESSOAL, LDA

Portugal

The company Matriz Jubilante created in 2019 works in the sector of molds and shapes Pet and inflation with a focus on the packaging industry - water industry, pharmacies, detergents and food. We combine technical expertise in the development of plastic products with the development of durable and high precision tools in our factory. Our goal is to become a reference in mold design in Portugal and to keep up with technological innovations.

All the products for "plastic injection molds"

Mould design and manufacturing

Plastic injection and mold production

Plastic injection product

Moulding

Glass and plastic injection molding

Website See all products
CONTOR GROUP

Romania

Manufacturer and supplier of water meters and AMR systems for water markets. Core competence: WATER METERING PRODUCTS AND SYSTEMS: [1] residential water meters: single-jet dry dial, multi-jet dry and wet dial, rotary piston volumetric water meters; [2] bulk and industrial water meters: horizontal WPH, single-jet class C dry dial, irrigation and compound water meters; [3] full-package AMR technologies: meters and electronic heat costs allocators endorsed with radio emitters, portable receivers and data concentrators, GPRS/GSM communication equipments, specific software applications. ENHANCED PRODUCTS AND SERVICES: test benches for water meters, brass die casting parts, CNCs mechanical processing, precision plastic injection parts, electrostatic powder coatings, plastic injection molds & tooling, nonferrous casting dies & tooling, metrological testing & calibration, meters maintenance & refurbishing. Certification: ISO 9001, ISO 14001, OHSAS 14001, ISO/IEC 17025, 75/33/EC, 2004/22/EC.
CIC - KLAUS CZERWONKA

Germany

As a customer-oriented service provider and supplier, we offer a comprehensive and efficient range of services. In our business segments, we serve as an interface between market requirements and the possibilities offered by modern manufacturing processes. Through consulting, mediation, trade or in-house production – our aim is to provide you with the optimum solution for your individual tasks. In doing so, we build on essential values such as partnership, fairness, openness and honesty, diligence and safety, environmental protection and the careful use of resources. We are also fully aware of our social responsibility and are committed – in particular at a local level – to art, culture and the community. Be inspired by our wide range of pneumatic cylinders – double-acting, single-acting and standard cylinders. Our product portfolio also includes telescopic cylinders and rodless linear cylinders. Do you need special solutions? We also have electromagnetic cylinders, telescopic pneumatic cylinders and cylinders with anti-rotation lock. Whether you are looking for working cylinders, boring cylinders, stainless steel special cylinders or pneumatic tandem cylinders, we're sure to have the solution for you. In the automotive, mechanical engineering and medical technology industries, we accompany you through professional project management. We call on all our expertise and experience to support launch management, quality assurance and supply chain management.

All the products for "plastic injection molds"

PLASTIC INJECTION MOLDED PARTS, RUBBER PARTS, CARBON PARTS

Website See all products
HODA, UAB

Lithuania

HODA, UAB is a company based in Lithuania specialized in plastic injection moulding since 1993. Over the years we became one of the biggest plastic injection moulders in the Baltic states with important production capacities. Our goal is to produce high quality products and meet our customers' requirements for a competitive price. At the moment our company operates with more than 70 injection moulding machines, which gives us flexibility to produce different sizes and purpose plastic parts from a fraction of gram up to six kilograms of mass. Our wide range of services includes mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting as well as assembly and packaging. We deliver both in Lithuania and all around the world. We are proud to be certified according to ISO9001, ISO14001, GMP and IATF 16949 standards. Moreover, we constantly improve our management system to preserve the environnement in accordance with food safety regulations. Don't hesitate to contact us for more information !

All the products for "plastic injection molds"

PAINT FOR PLASTIC SURFACES

PLASTIC MOULD TOOL MANUFACTURING

PLASTIC INJECTION MOULDING

INJECTION MOLDING DESIGN

INJECTION MOLDING COMPANIES

Website See all products
SCHOCK GROUP

Germany

The SCHOCK GROUP is a group company with international operations and has its head office in the town of Urbach, near Stuttgart in south western Germany. At various sites across Europe, we develop and manufacture high-quality ball guides, telescopic rails, special profiles, plastic products and assemblies. These products are used all around the world in the automotive industry, major household appliances, the home and kitchen industries, as well as in many industrial applications . SCHOCK's key areas of expertise includes roll forming technology with a wide range of integrated processes. This means that we are able to produce high-quality smooth-running telescopic rails and high-precision profiles with extremely small tolerances and high material utilisation for our customers. Our high production depth enables us to offer a wide range of services in metal processing in order to produce your complex assemblies. With SCHOCK's powder coatings, we can produce high-performance and visually appealing product surfaces with long-term protection against corrosion and a customised colour scheme. SCHOCK uses advanced machinery to produce complex 1-component or 2-component plastic parts. Our areas of expertise also include mould manufacturing and tool manufacturing. Our German logistics hub supplies a continually growing range of over 150, 000 products in over 200 product categories for industry and trade right across Europe.

All the products for "plastic injection molds"

Injection Molds for Plastics - Highest Quality Achieved thro

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

PLASTIV SP. Z O.O.

Poland

Manufacturer and distributor of plastic parts with many years of experience and knowledge in the field of plastics processing and the development of injection molds for injection molding production. Comprehensive service for our customer's projects, assessed on their complexity. Product development services from designing the injection mold through their production to the manufacturing of the final product. Our staff has an assessment of the material and technology supported by many years of professional experience in the plastics processing industry and the production in the automotive industry. We also provide consulting services on request in areas listed below: • Project management • Technical consultancy • Strategic and operational management • Maintenance management • Production management COMPANY OFFER: • Custom injection molding production in cooperation on molds provided by the customer • Outsourcing of production - injection molding machines up to 100T and weight up to 158g PS. • Performing inspections of the molding tools on request (forms up to 1T) • Production and distribution of plastic products - details on request • Manufacturing of molds and customized metal precision parts - details on request • Distributor of standard parts for injection molds like date stamps, ejectors, standard sleeves and other components for the molds • Distributor of quick couplings for molding tools • Consulting services on request Please send an inquire to our email address.

Website
MOLDEO JAKUB MAJCHRZAK

Poland

Moldeo is a group of professionals from plastic industry.What do we do? We take care of technological records, We analyse finished products considering technological issues, we make prototype models, we make injection molds, we produce finished plastic parts.Our company's offer is addressed mainly to two target groups: 1)to companies which don't have any experience in plastic processing, but want to start production of plastic parts, 2)to injection molding companies which are interested in buying injection molds.Moldeo deals with technological consulting. Molds are produced by external toolshop.Adventages: -fast pricing from several toolshops which allows to properly estimate the price level of the given device-a possibility to advancement of implementation of multicomponent designs through splitting the production on few tool manufacturers.-Receiving the mold after tests with full technological records of process optimized by our specialists.
MOULD DESIGN, UROS BRUNCEK S.P.

Slovenia

We offer electrode design, mold design for plastic injection molding, JIG design with the latest CAD technologie PTC Creo. Design services includes complete 3D mold design and 2D drawing also sometimes plastic part design, development, and solid modeling. Range of Complexity Whether you need a simple open and shut mold or the complexity of a multi-action automotive instrument panel, our Design can accommodate your needs. Some of our designs include: - Automotive - Complex Actions - Hot Runners Experience and Capacity Variety of Mold Types Years of experience and a broad customer base have added to the diversity of our mold design experience, including: - Injection - Structural Foam
BDP MECHANICAL COMPONENTS DEUTSCHLAND GMBH

Germany

The bdp Group, founded in 1992 and comprising 150 employees, is based in Berlin with over 14 further offices in Bulgaria, China, Germany, Poland, Spain and Switzerland. The subsidiary bdp Mechanical Components, which has existed since 1982, is a specialist supplier in the international sourcing of casting, forging, machining and automotive parts for European manufacturing companies from China and Eastern Europe. We supply over 50 European customers in the automotive, mechanical engineering, rail, energy, gas and liquid transport sectors. Everything from a single source: Model making, initial sampling, parallel production (start-up), series production, optimisation. Product quality. Strategic acquisition: Optimisation of acquisition processes, reduction of acquisition costs. Selection of suitable suppliers, supplier audits: Evaluation of technical production and quality capabilities. Quality control on site: Monitoring production, outgoing goods inspection before shipping

All the products for "plastic injection molds"

Sealing

Website See all products
STIELER KUNSTSTOFF SERVICE GMBH

Germany

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

Website

POLY-PRAT,S.A.

Spain

The company POLY-PRAT,S.A., is a Manufacturer/ Producer, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Quality - certification, Plastic injection, mould building, and Quality - certification industries. It is based in El Prat De Llobregat (barcelona), Spain.
FIG PLÁSTICOS

Portugal

The company FIG PLÁSTICOS, is a Manufacturer/ Producer, which operates in the Plastics - industrial products industry. It also operates in the Injection, plastics - machinery, Ultrasound systems - Processing plastics, Extrusion of rubber and plastic, Plastic injection, Injection, plastics - machinery, Ultrasound systems - Processing plastics, and Extrusion of rubber and plastic industries. It is based in Zona Industrial En 1 Norte, Portugal.

Product recommendations

Portugal

Portugal

China

See more products

MECANHOR

France

The company MECANHOR, is a Service Provider, which operates in the Spare parts for cars industry. It also operates in the Pad printing, Pad printing, Pad printing on stoppers, Plastic injection, and Plastic injection stopper caps industries. It is based in Decines Charpieu, France.
FERONYL

Belgium

The company FERONYL, is a Multi-Category, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Plastic injection, moulding of plastic materials, and injection moulding of plastics industries. It is based in Mouscron, Belgium.
MK TRADE

Finland

We are trading company in Finland. We have 10 years of international experience about mold manufacturing, injection molding and design - planning work. We can do the planning and realization from the beginning to the end, all we need is your idea of what you would need. The companies we work with have been in this industry for more than 30 years. Hence, they understand exactly what a complete solution should look like. Please contact us for further information and for your inquiries. Mesut Kaya
NATIGAM SA

Portugal

The company NATIGAM SA, is a Service Provider, which operates in the Plastics moulding industry. It also operates in the Injection moulding of rubber and plastic, Injection moulding of rubber and plastic, Plastic injection, IML plastic injection, and assembly lines industries. It is based in Estarreja, Portugal.
ASPEL POLYFORM

Belgium

The company ASPEL POLYFORM, is a Service Provider, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Rubber and plastic - processing, Rubber and plastic - processing, and Plastic injection industries. It is based in Limbourg, Belgium.
PRO-MOULDS (MIDLANDS) LTD

United Kingdom

Pro-Moulds (Midlands) Ltd was established in 1993 to provide a complete toolmaking service to the plastic injection moulding industry! Ever since that day we have grown and adapted until now where we are widely regarded as one of the UK's leading toolmaking companies. Run by hands on and experienced directors, working with a highly skilled team of toolmakers, we have completed a large number of projects for some of the UK's leading companies. Precision and efficiency is key to our business, and it is this lean operation that has allowed us to grow at the rate we have for the last 25 years! We are experts in plastic injection moulding, tool repair, toolmaking and even laser welding! working to create a wide array of tools for large UK, and European customers. For more information about us, what we do and how we can help you, get in touch with us today! Our team would be more than happy to help you with your toolmaking, tool repair, injection moulding and laser welding requirements. Customer service is key to us here at Pro-Moulds, and we aim to ensure that every customer we work with is happy with the workmanship and the overall quality of the products!
CAFUTA D.O.O.

Slovenia

We are an innovative company specializing in the development of new products, improving the construction of existing products, and in solving production problems. We offer tailor-made support in all stages of product development, from design to validated prototypes, including support in establishing serial production. We have many years of experience with working in the automotive industry and in product development meeting the requirements of OEM and TIER1 suppliers. We can provide most of the activities of the development project: communication, 3D modeling, computer simulations, drawings, prototype manufacturing and testing. Our clients are tool industry companies and production companies. In addition to consulting services, we also offer process optimization and development of tools and new technologies. We are ecologically conscious and want to make an important contribution to the low-carbon economy. For that reason, we strive towards successfully completing at least one development project in the field of low-carbon technology per year, in addition to other market activities. We enthusiastically share our experience with you and utilize them to accomplish your goals. A challenge motivates us, by overcoming it, a company learns, develops, and grows.

All the products for "plastic injection molds"

Simulations

See all products
WALONA - TODOROV CO

Bulgaria

Walona company was established in 1989 in Sofia city, Bulgaria with all private capital.We have injection moulding machines for production of plastic parts and moulds to produce. Most of our production is loaded with a matrix and plastic details by the requests of our clients. We work with sole traders and companies from all our country. We can give you an assistance for design and make a matrix with the desired form. We have own production and work with materials supplied by the customer. We have highly qualified personnel with extensive experience in manufacturing.We have potentiality and willingness to solve your specific technological problem in the special field which we are working in.Since the beginning of 2011. company is certified by international quality standard ISO 9001: 2008

LOVRIC MASCHINENHANDEL

Austria

The company LOVRIC MASCHINENHANDEL, is a Service Provider, which operates in the Used machines and equipment industry. It also operates in the Injection, plastics - machinery, injection moulding of plastics, and Injection, plastics - machinery industries. It is based in Tribuswinkel, Austria.
DEXPROM

Portugal

The company DEXPROM, is a Manufacturer/ Producer, which operates in the Moulds, plastic and rubber industry industry. It also operates in the Injection moulding of rubber and plastic, Moulds, precision, Injection moulding of rubber and plastic, injection moulding of plastics, and Moulds, precision industries. It is based in Maceira, Leiria, Portugal.
APITECH S.R.L.

Italy
BARON SOLUTIONS

Germany

The company BARON SOLUTIONS, is a Multi-Category, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Injection, plastics - machinery, Injection, plastics - machinery, and Surface treatment industries. It is based in Aschaffenburg, Germany.
3D HUBS - DIGITAL MANUFACTURING PLATFORM

Netherlands

3D Hubs is an online manufacturing platform (for 3D printing, CNC machining, injection molding & sheet metal working) that enables engineers to access virtually unlimited on-demand production capabilities through a global network of manufacturing partners. Engineers can upload their designs directly, receive an immediate offer and can start the production of their prototypes & parts with just a few clicks. The company founded in Amsterdam in 2013 is one of the fastest growing and most innovative companies (Deloitte, 2019) and already works with more than 35, 000 companies worldwide to manufacture their prototypes & parts, including 27% of the Fortune 500. With the motto "Offer in Seconds, parts in a few days ", 3D Hubs has set itself the goal of accelerating innovation in all industries, offering all common digital manufacturing processes, including 3D printing, CNC processing, injection molding and sheet metal processing.

All the products for "plastic injection molds"

Injection Molding Service

See all products
DANESI PIETRANGELO

Italy

The company DANESI PIETRANGELO, is a Service Provider, which operates in the Injection, plastics - machinery industry. It also operates in the injection press for plastics industries. It is based in Fara Gera D'adda, Italy.
AQUILA SERVICE S.R.L.

Italy

The company AQUILA SERVICE S.R.L., is a Service Provider, which operates in the Injection, plastics - machinery industry. It also operates in the injection press for plastics industries. It is based in Breganze, Italy.
A.T.P. DI BARBON RENZO & C. S.A.S.

Italy

The company A.T.P. DI BARBON RENZO & C. S.A.S., is a Service Provider, which operates in the Injection, plastics - machinery industry. It also operates in the injection press for plastics industries. It is based in Conegliano, Italy.
FOR. PLAST

Italy
CABRO-PLASTIC AG

Switzerland

The company CABRO-PLASTIC AG, is a Manufacturer/ Producer, which operates in the Tubes and pipes, rubber and plastic industry. It also operates in the Rubber and plastic - processing, Injection moulding of rubber and plastic, Plastics - industrial raw materials, Plastics - construction industry, Rubber and plastic - processing, Injection moulding of rubber and plastic, Plastics - industrial raw materials, and Plastics - construction industry industries. It is based in Goldach, Switzerland.

Find quotes for

Filters

Results for

Service Provider - Plastic injection molds

Number of results

30 Companies