Results for

Service Provider - Moulds for plastics and rubber

850 Companies

162 Products

NSB, LDA

Portugal

The company NSB, LDA, is a Manufacturer/ Producer, which operates in the Moulds, plastic and rubber industry industry. It also operates in the moulds for plastics and rubber industries. It is based in Leiria, Portugal.
TAKE CRAFT MÜHENDİSLİK TİCARET VE LİMİTED ŞİRKETİ

Turkey

The company TAKE CRAFT MÜHENDİSLİK TİCARET VE LİMİTED ŞİRKETİ, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It also operates in the moulds for plastics and rubber, Plastic injection, Metal processing, and manufacture of moulds for plastics industries. It is based in Ankara, Turkey.
MATRIZ JUBILANTE UNIPESSOAL, LDA

Portugal

The company Matriz Jubilante created in 2019 works in the sector of molds and shapes Pet and inflation with a focus on the packaging industry - water industry, pharmacies, detergents and food. We combine technical expertise in the development of plastic products with the development of durable and high precision tools in our factory. Our goal is to become a reference in mold design in Portugal and to keep up with technological innovations.

All the products for "moulds for plastics and rubber"

Moulding

Mould making

plastic glass rubber moulds

On-demand plastic injection molding parts

Moulding

Website See all products
STIELER KUNSTSTOFF SERVICE GMBH

Germany

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

Website
HODA, UAB

Lithuania

HODA, UAB is a company based in Lithuania specialized in plastic injection moulding since 1993. Over the years we became one of the biggest plastic injection moulders in the Baltic states with important production capacities. Our goal is to produce high quality products and meet our customers' requirements for a competitive price. At the moment our company operates with more than 70 injection moulding machines, which gives us flexibility to produce different sizes and purpose plastic parts from a fraction of gram up to six kilograms of mass. Our wide range of services includes mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting as well as assembly and packaging. We deliver both in Lithuania and all around the world. We are proud to be certified according to ISO9001, ISO14001, GMP and IATF 16949 standards. Moreover, we constantly improve our management system to preserve the environnement in accordance with food safety regulations. Don't hesitate to contact us for more information !

All the products for "moulds for plastics and rubber"

THERMOSET PLASTIC MOLDING

PLASTIC MOULD TOOL MANUFACTURING

PLASTIC INJECTION MOULDING

GAS ASSISTED INJECTION MOULDING

PROCESSING PLASTICS

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ITALSTAMPI

Italy

ITALSTAMPI has, since 1981, been designing and manufacturing dies, moulding plastic materials and stamping small metal pieces. Its modern premises cover a 9, 000m² surface area, 5, 000 m² of which is covered. The indepth knowledge, professionalism, production automation, rapid response to client requirements are the company's key components of success that have enabled it to maintain constant growth over the years.

Website
HEMOGUM

Serbia

Hemogum is a manufacturer/producer of technical rubber goods and offers cost-effective solutions for rubber, rubber-metal or rubber-plastic products. We achieve successful business results with constant development, stable investment policy and constant quality improvement of the existing and the introduction of new products. Hemogum disposes with CNC equipment, milling and spark erosion machines that are fully integrated in technological system. We design, manufacture and test new product from the previously determined requirements, from the design phase of virtual models using the most advanced 3D software, though examining with the end element method, up to the prototype and tools manufacture for mass production. We are able to maximally shorten the development time and expenses due to maximum usage of capabilities of modern software solutions. We are also very successful in dealing with reverse engineering according to the given sample, whether it is damaged part of an equipment or a new model. We are qualified to perform measurements, analysis and testing of highly complex parts, and then manufacture then as well, or make them as individual parts or either create a tool for their development. Hemogum produces custom products: parts for the needs of the automobile industry, freight traffic, agricultural mechanization, mining, construction, chemical industry, food industry and other products.

Website See all products
WERKZEUGBAU KRÖGER GMBH

Germany

The company WERKZEUGBAU KRÖGER GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Lohne, Germany.
KMT KUNSTSTOFF- UND METALLTECHNOLOGIE GMBH

Germany

The company KMT KUNSTSTOFF- UND METALLTECHNOLOGIE GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Treuen, Germany.
WERKSTÄTTEN HAUS HALL GMBH

Germany

The company WERKSTÄTTEN HAUS HALL GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Gescher, Germany.

SI-TECH SINGER GMBH

Germany

The company SI-TECH SINGER GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Dornstetten, Germany.
ANTON CLEMENS GMBH & CO KG, KUNSTSTOFFVERARBEITUNG

Germany

The company ANTON CLEMENS GMBH & CO KG, KUNSTSTOFFVERARBEITUNG, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Bergisch Gladbach, Germany.

Product recommendations

Manufacturer of plastic injection moulds

Portugal

China

Plastics injection for auto and non-auto components supplier

Romania

Plastics injection for auto and non-auto components manufacturer

Romania

See more products

ZMT WERKZEUGBAU DEUTSCHLAND GMBH

Germany

The company ZMT WERKZEUGBAU DEUTSCHLAND GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Niederkassel, Germany.
STEPHAN KUNSTSTOFFSERVICE INH. TILO STEPHAN

Germany

The company STEPHAN KUNSTSTOFFSERVICE INH. TILO STEPHAN, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Rangsdorf, Germany.
2 M KUNSTSTOFFTECHNIK GMBH

Germany

The company 2 M KUNSTSTOFFTECHNIK GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Walting, Germany.
ZABEL TECHNIK GMBH

Germany

The company ZABEL TECHNIK GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Krefeld, Germany.
HINTSTEINER GROUP GMBH

Austria

The company HINTSTEINER GROUP GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Mürzhofen, Austria.
MARCEL BÜTZER AG

Switzerland

The company MARCEL BÜTZER AG, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Munchenbuchsee, Switzerland.
KÄSBAUER LOHNVERPACKUNG GMBH

Germany

The company KÄSBAUER LOHNVERPACKUNG GMBH, is a Service Provider, which operates in the Blow moulding of rubber and plastic industry. It is based in Wernberg-Köblitz, Germany.
PER-PLEX ACRYL UND PLEXIGLAS PRODUKTE NACH KUNDENWUNSCH

Germany

The company PER-PLEX ACRYL UND PLEXIGLAS PRODUKTE NACH KUNDENWUNSCH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Bonn, Germany.

KHK-KUNSTSTOFF-HANDEL HASSEL & SEITER GMBH

Germany

The company KHK-KUNSTSTOFF-HANDEL HASSEL & SEITER GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Eggenstein-Leopoldshafen, Germany.
KAISER INGENIEURBÜRO GMBH

Germany

The company KAISER INGENIEURBÜRO GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Endingen, Germany.
PMB CONSULTING GMBH & CO. KG

Germany

The company PMB CONSULTING GMBH & CO. KG, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Berlin, Germany.
KRES ELEKTRONIK + SERVICE GMBH

Germany

The company KRES ELEKTRONIK + SERVICE GMBH, is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Fraureuth, Germany.
LÜCO-PLASTIC WILHELM VAHLE INHABERIN ANGELA STRÖCKER E.K.

Germany

The company LÜCO-PLASTIC WILHELM VAHLE INHABERIN ANGELA STRÖCKER E.K., is a Service Provider, which operates in the Moulds, plastic and rubber industry industry. It is based in Melle, Germany.
SCHOCK GROUP

Germany

The SCHOCK GROUP is a group company with international operations and has its head office in the town of Urbach, near Stuttgart in south western Germany. At various sites across Europe, we develop and manufacture high-quality ball guides, telescopic rails, special profiles, plastic products and assemblies. These products are used all around the world in the automotive industry, major household appliances, the home and kitchen industries, as well as in many industrial applications . SCHOCK's key areas of expertise includes roll forming technology with a wide range of integrated processes. This means that we are able to produce high-quality smooth-running telescopic rails and high-precision profiles with extremely small tolerances and high material utilisation for our customers. Our high production depth enables us to offer a wide range of services in metal processing in order to produce your complex assemblies. With SCHOCK's powder coatings, we can produce high-performance and visually appealing product surfaces with long-term protection against corrosion and a customised colour scheme. SCHOCK uses advanced machinery to produce complex 1-component or 2-component plastic parts. Our areas of expertise also include mould manufacturing and tool manufacturing. Our German logistics hub supplies a continually growing range of over 150, 000 products in over 200 product categories for industry and trade right across Europe.

All the products for "moulds for plastics and rubber"

Injection Molds for Plastics - Highest Quality Achieved thro

See all products
3D HUBS - DIGITAL MANUFACTURING PLATFORM

Netherlands

3D Hubs is an online manufacturing platform (for 3D printing, CNC machining, injection molding & sheet metal working) that enables engineers to access virtually unlimited on-demand production capabilities through a global network of manufacturing partners. Engineers can upload their designs directly, receive an immediate offer and can start the production of their prototypes & parts with just a few clicks. The company founded in Amsterdam in 2013 is one of the fastest growing and most innovative companies (Deloitte, 2019) and already works with more than 35, 000 companies worldwide to manufacture their prototypes & parts, including 27% of the Fortune 500. With the motto "Offer in Seconds, parts in a few days ", 3D Hubs has set itself the goal of accelerating innovation in all industries, offering all common digital manufacturing processes, including 3D printing, CNC processing, injection molding and sheet metal processing.

All the products for "moulds for plastics and rubber"

Injection Molding Service

See all products
MOULDS AND TOOLS - TECHNIC S.R.O.

Czech Rep.

The Moulds and Tools company is a dynamically developing private company which since 1999 has dealt in the market segment directed towards the production of prototypes and small series injection moulds. However, we have gradually changed into a company which ensures a complete service for our clients. This means that we are able to produce either moulds, as well as the development of pressed pieces, form design and, of course, the pressing of samples. The processing of all data on high-performance CAD and CAM systems is a matter of course. As an input model we often use only sketches; however in most cases the basis for further work is a 3D digital model from another CAD system. Due to our specialization in prototype moulds, we exclusively use aluminium alloys for the production of moulds.
PRO-MOULDS (MIDLANDS) LTD

United Kingdom

Pro-Moulds (Midlands) Ltd was established in 1993 to provide a complete toolmaking service to the plastic injection moulding industry! Ever since that day we have grown and adapted until now where we are widely regarded as one of the UK's leading toolmaking companies. Run by hands on and experienced directors, working with a highly skilled team of toolmakers, we have completed a large number of projects for some of the UK's leading companies. Precision and efficiency is key to our business, and it is this lean operation that has allowed us to grow at the rate we have for the last 25 years! We are experts in plastic injection moulding, tool repair, toolmaking and even laser welding! working to create a wide array of tools for large UK, and European customers. For more information about us, what we do and how we can help you, get in touch with us today! Our team would be more than happy to help you with your toolmaking, tool repair, injection moulding and laser welding requirements. Customer service is key to us here at Pro-Moulds, and we aim to ensure that every customer we work with is happy with the workmanship and the overall quality of the products!
WALONA - TODOROV CO

Bulgaria

Walona company was established in 1989 in Sofia city, Bulgaria with all private capital.We have injection moulding machines for production of plastic parts and moulds to produce. Most of our production is loaded with a matrix and plastic details by the requests of our clients. We work with sole traders and companies from all our country. We can give you an assistance for design and make a matrix with the desired form. We have own production and work with materials supplied by the customer. We have highly qualified personnel with extensive experience in manufacturing.We have potentiality and willingness to solve your specific technological problem in the special field which we are working in.Since the beginning of 2011. company is certified by international quality standard ISO 9001: 2008