Results for

Service Provider - Electronic system testing

29 Companies

5 Products

Product recommendations

Germany

Test bench development & special test benches

Germany

See more products

EVEREST TEAM

France

Everest Team is a group of 7 companies with complementary skills on powertrain and vehicles R&D. We provide a complete offer from research to manufacturing for the automotive, transportation & energy sectors and conduct multi-metier R&D projects. For that, Everest Team is fully-integrated in terms of design, simulations, testing & prototyping means. We support the complete development, manufacturing, tuning & validation of technological demonstrators (powertrain & vehicles) in a short time. We also have been developing new concepts of motorization such as recovery energy, downsizing, low consumption, low emissions...In-house expertise & means : mechanical, electrical & electronic engineering, complete simulations, manufacturing & rapid prototyping (sand casting, machining, embedded electronic systems, complete engine & vehicle, test means), testing (fluid measurement, engine emissions & performances, NVH, injection & filtration, durability & relability, laser vibrometry.
DHD CLEAN PARTS GMBH & CO. KG

Germany

DHD Clean Parts GmbH & Co. KG was founded in November 2017 after the separation of DHD Technology GmbH & Co. KG. DHD Clean Parts GmbH & Co. KG's key area of expertise is industrial parts cleaning. In addition, DHD Clean Parts GmbH & Co. KG also runs a laboratory for residual dirt analysis. This is where testing to ensure internal quality assurance is carried out, as well as testing on behalf of our customers. This laboratory acts completely independently of the company's other business activities. Our customers are in the automotive industry, as well as their suppliers, the electronics and electrotechnical industry, the heating systems and heat technology sector, mechanical engineering, environmental and process engineering and many more sectors of industry.

Website
MMD - MODERN MICRO DEVICES

Germany

Technology for Tomorrow‘s World - Since 2003, we have provided you with innovative products and professional solutions for the renewable energy, automotive and consumer electronics sectors, industry and other electronics branches. Our engineering office addresses the daily challenges encountered in the complex and ever-changing field of electronics. Boasting a global network, we place particular importance on a sustainable approach to work in order to drive your future-proof technologies forward. We or our long-standing partners cover the entire value chain for electronic modules, devices and systems and are also happy to take over specific tasks within your product development activity. Our range of services stretches from development and production to after-sales service: - hardware design - embedded - high-current and communication technologies such as W-LAN and 5G connection - circuit board layout - module construction - software development and the definition of testing and inspection concepts. As a service provider with numerous customers as well as modern, versatile facilities, we can keep project costs low, even for small volumes. We can also call on extensive project experience in the field of mechanical design, all the way up to complete equipment assembly. We provide development, prototypes and 0 series through to shipping from a single source. MMD - engineering your innovation

Website
MAXON MOTOR AG

Switzerland

Drive systems, micro-drives, DC micro-motors, precision gearboxes, servo components, control systems, CIM and MIM components, medical technology, industrial automation, safety technology, measuring and testing technology, communication technology, automotive industry applications, consumer applications and aerospace applications. Other products: Speed control systems for small electrical motors, planetary gearboxes, electronic speed control devices for electric motors, brushless and electronically commutated motors, DC electric motors

See all products
ASSMY & BÖTTGER ELECTRONIC GMBH / A+B ELECTRONIC

Germany

A+B Electronic has embodied quality, flexibility and customer focus for more than 50 years. We are the right system supplier for your electronic demand. As an EMS service provider, we place great importance on the latest production standards regarding our machines and systems. Around 125 employees produce and develop our customer projects every day, whether in prototypes or serial production. In addition to the equipping of SMD and THT assemblies, we also take care of, for example, installation, testing, conformal coating and logistics. Part of our philosophy is: Reliability through Made in Germany. The advantages for you are: Fixed contact persons and the best possible planability for your projects. This is why we have been working with many of our customers for several years. We face new challenges in the market with enthusiasm. Your business drives us to find new solutions – today and in the future. We embody "Variety with a system".

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ALFA-MED LLC

Russia

Alfa-Med is a manufacturer of medical equipment for health assessment. The basement of the electronic diagnostics of the human is applied on the wave nature of biological objects: frequency-wave effect and imprinting. Own research and production facilities, as well as cooperation with the world's leading R&D and medical institutes enables Alfa-Med LLC to produce diagnostic equipment employing modern research methods used in medical institutions of Russia, Europe and the USA •SensitivE Audit allows for a complete medical diagnosis of the body with highest accuracy up to 97%. SensitivE Audit is the latest generation based on Sensitiv imago device, but has a unique capability to plug-in additional modules: TempoHeart, TempoLab, DynamicBIA, LineBIA, NeuroStim. •Sensitiv imago (530/535) is a device for instant health assessment and supplement testing. The company has been manufacturing medical electronics, apparatus and equipment since 2001. Our team is represented by MD and the best specialists with PhD in degree in Medicine, Biology and Technical Sciences, a team of scientists and physicians with 20 years of experience in quantum physics, holistic medicine, homeopathy, naturopathy, bioresonance and biofeedback systems. We are ready to supply you and develop installations and equipment for health care, electromedical equipment capable of detecting organ dysfunctions at the preclinical stage.

See all products
BRUDER ELECTRONICS, LDA

Portugal

Development Services & Electronic Product Design BRUDER ELECTRONICS design and develop industrial electronics and electronic systems. According to our Life Cycle Engineering approach, manufacturing, assembly, logistics, maintenance, support, user training, recycling, etc. are integral parts of the design process. With our guiding principle ‘Quality cannot be tested in, Quality must be designed in! ‘, we can support and accompany our clients in all stages of the design flow. Our services include: Systems Engineering, Hardware Engineering, Software Engineering Integrated Product Development, Project Management Requirements Engineering Life Cycle Engineering Hardware Synthesis and Code Generation System Level Modeling and Modeling Tools Verification-, Validation- and Test Procedures Software Development, Firmware, Embedded Programming Hardware Software Co-Design Microelectronics, Micro System Technology, Optoelectronics Microprocessors, Microcontrollers, Signal Processors, FPGA Design Real-time Systems Communication Protocols and Bus Systems Design for Manufacture and Assembly Production Management. Our products include: PCI Express analog and digital I/O cards USB and Ethernet Mesuring Systems.

See all products
KRÜGER & GOTHE GMBH

Germany

Krüger & Gothe GmbH is a medium-sized electronic services provider serving both national and international customers, with locations in Germany and China (Kunshan). We operate in the automotive, rail, medical, industrial and aerospace sectors. The company was founded in 1997 and has become one of the leading electronic services providers. Our high-performance production ranges from electronic components right through to complete electronic products and terminals; we can also cover samples and large-volume orders. Our wide range covers all modern technologies, such as our high-performance SMD lines, optical inspection systems, automated ICT and functional tests and boundary scans. Customers will benefit from our wide-ranging experience throughout all our processes, from product development and development support, right through to product validation.
RVL

United Kingdom

RVL is an electronic engineering company, specialising in the design, testing and manufacture of innovative electronic systems From our secure site, we provide a full engineering service from prototype creation through to delivery of finished product. Clients can pick and mix from our services for a tailor-made solution to their electronic engineering requirements. RVL is fully equipped with the latest technology. With ISO 9001: 2015 certification and engineers trained to IPC-A-610 workmanship standards, you can be assured of the highest quality service and products. Electronic design engineers specialise in PCB design and layout, microprocessors & microcontrollers, prototyping, simulation & testing, FPGA development, RF design, testing & certification. Software development engineers specialise in embedded firmware development, embedded Linux development, embedded Linux distribution build & customisation, embedded Linux application development. Our manufacturing facility offers a high-quality PCB assembly service, whether for just one prototype, a small run of 50 units or a larger run of several thousand, you can benefit from our attention to detail, flexibility and speed.
ILUMTECH

Slovakia

iLumTech provides solutions to other manufacturers of lighting fixtures that cover everything from the concept to the final product, within the framework o which we deliver a wide range of services across industrial, optical, thermal, electronic and mechanical design, all of which are supported by excellent supply chain management, full system testing and prototyping. iLumTech has some of the best equipped in-house laboratories in Europe, therefore can provide customers with an array of tests side-by-side with the other services. These services include optical laboratory, thermal laboratory, electronic laboratory as well as mechanical testing. Under the brand “Connected Lighting” iLumTech presents several lighting control components (fully DALI compatible) for small and middle size installations. All of these devices have the common aim: to deliver to customers the most often functions from the intelligents lighting management products for a reasonable price with an easy installation.

TRESCAL LTD

United Kingdom

Trescal, international specialist in calibration provides a broad range of services for the test and measuring equipment market. Trescal are represented in 22 countries: Austria, Belgium, Brazil, Canada, Czech Republic, Denmark, France, Germany, Italy, Luxemburg, Malaysia, Mexico, Morocco, Singapore, Spain, Sweden, Switzerland, the Netherlands, United Kingdom, United States, Romania and Tunisia. Supplementing the standard technical services (verification, calibration and repair of T&M instruments), Trescal offer their expertise for the implementation and acquisition of measurement systems, customized equipment pool management software solutions, metrology and technical support, and training. Trescal operate in more than 120 owned calibration laboratories and employ over 3200 people across the world. Trescal service 40 000 customers in various sectors such as Defence, Aerospace, Aeronautics, Automotive, Power Generation & Utilities, Electronics Manufacturing, Communications and Medical & Chemistry. Trescal’s Pro Forma sales reach 297 million Euros.
SOBUILDIT LIMITED

United Kingdom

Sobuildit Design is a low-cost highly responsive Electronics Design Service based in Hampshire. Serving the UK, with 15+ years of hard-fought Electronics industry experience, I can handle most aspects of Electronics prototyping and product design. Design capabilities include: - System modelling - Analog and Digital Electronics - Micro-controller hardware/firmware - PCB design including mechanical, thermal and EMC/EMI design - Custom power supply design - FPGA hardware and RTL design - Physical prototyping (traditional leaded and doubled-side SMD) - Production test jig design and automation - Application software development - Pre-certification testing and management. By the hour or longer projects accepted, at very competitive rates. Call now to get started on turning your idea into reality. No job is too small.

FELMI-ZFE ELEKTRONENMIKROSKOPIE UND NANOANALYSE

Austria

Knowing the structure of your articles & materials on a sub-µm scale reveals potential of next generation materials! FELMI - the Institute of Electron Microscopy at the TU Graz - & ZFE - the Centre of Electron Microscopy - is a research network that is characterized by decades of experience in dealing with complex analysis methods for demanding materials with electron microscopy, atomic force microscopy and spectroscopy. We are well equipped for • failure and damage analysis, • to ensure continuous quality control, • for peak coverage or reducing backlogs, • to supplement internal tests, • to solve individual challenges by experts. Well-maintained and controlled measuring systems for the analysis of fine & nano structures and experienced and trained personnel allow measurements to be outsourced to the FELMI-ZFE as a reliable partner. Orders are planned and processed in a timely manner, the consistent/reliable/professional preparation of a largevariety of samples is highly developed. FELMI-ZFE is well equipped with • Electron Microscopes (ESEM, SEM, TEM) , Energy- and wavelength-dispersive X-ray spectroscopy (EDX, WDX)• Focused Ion Beam Microscopes (FIB), • IR- & Raman-Spectroscopes (also correlated with SEM-EDX), • Atomic Force Microscopes (AFM), • X-Ray Diffraction instruments (XRD) and • Light Microscopes (2D and 3D). We are looking forward to working with you – mail to office@felmi-zfe.at or visit our homepage www.felmi-zfe.at for starting! (+43 316 873 8321)
IOMICO

United States

iomico is a full-cycle IoT engineering company that builds impactful solutions powered by Edge AI, Machine Learning, and CV. We have advanced experience in BLE/Bluetooth, Zigbee, Lora/LoraWAN, RFID, NFC, LAN/Ethernet, Mesh Networks, Thread, MLM2M, GSM (LTE/5G), Wi-Fi, etc Our team consists of experts in: - Electronics engineering - Embedded development: C, C++, Python, Bare-metal, RTOS (Zephyr, FreeRTOS, Chibios), Linux (OpenWRT, uCLinux, Yocto), low-level & FPGA programming, Embedded DevOps - System and client-server SW development: web (Node.js, C#, .Net, Python, JavaScript (Vue.js, Angular.js, React.js)), and mobile; image, and video processing; connectivity to devices, cross-platform QT and React Native - Edge AI / Computer Vision: PyTorch, TensorFlow, MediaPipe, OpenCV, Deepstream - Industrial Design and Mechanical Engineering - Penetration Testing: Certificates: OSCP, CISSP, CCNA Cyber Ops; Reverse Engineering; Analysis of HW, FW, communication, web services, app/interface
CONTOR GROUP

Romania

Manufacturer and supplier of water meters and AMR systems for water markets. Core competence: WATER METERING PRODUCTS AND SYSTEMS: [1] residential water meters: single-jet dry dial, multi-jet dry and wet dial, rotary piston volumetric water meters; [2] bulk and industrial water meters: horizontal WPH, single-jet class C dry dial, irrigation and compound water meters; [3] full-package AMR technologies: meters and electronic heat costs allocators endorsed with radio emitters, portable receivers and data concentrators, GPRS/GSM communication equipments, specific software applications. ENHANCED PRODUCTS AND SERVICES: test benches for water meters, brass die casting parts, CNCs mechanical processing, precision plastic injection parts, electrostatic powder coatings, plastic injection molds & tooling, nonferrous casting dies & tooling, metrological testing & calibration, meters maintenance & refurbishing. Certification: ISO 9001, ISO 14001, OHSAS 14001, ISO/IEC 17025, 75/33/EC, 2004/22/EC.
DNC ELECTRONICS LTD

United Kingdom

Independent Fanuc CNC electronics specialists to the machine tool industry. Supporting many industries reliant on CNC machining too manufacture for their own industries. Offering Fanuc parts and repair of Fanuc electronics inclusive of spindle drives and servo amplifier modules, power supply units, control system pcb's, and monitor displays. Further full diagnostic, testing and overhaul of AC servo and spindle motors, encoders and spindle sensor for feedback. Deep into CNC's such as memory, axis controller pcbs, servo control, FSSB, Type A, Type B, I/O Link and other serial interfacing. Contact us for more information on what repair and testing services can offer for your Fanuc CNC control or Fanuc parts available today for immediate shipping.
ZETA-LAB

Lithuania

Who are we? We are the company UAB "Zeta-Lab", which has gathered a large team of professional and ambitious engineers, aiming to share many years of experience in designing various types of automation and electronic equipment. We design production automation and accounting systems. We program PLC controllers for technological process control. When working, it is always important for us to have a satisfied customer and high-quality and timely work, so we are convinced that using our knowledge and experience we can find and implement the optimal technological solution for your daily tasks. How can we help you? We will evaluate the possibilities of product development We will calculate the development and production costs We will create, manufacture and program the electronic part of the product We will design and manufacture the mechanical part of the product We will certify your product in our partner laboratories We will perform full product testing We will prepare technical documentation We will give your product a CE certificate Our work experience Programming of integrated OpenWrt, Yocto, Android and other Linux-based systems and applications Design and programming of microcontroller ARM, AVR and microprocessor ARM, MIPS, x86 systems Design of input and output circuits and their protections Control of professional LED lighting Measurement of alcohol in exhaled air Data collection and processing and storage AI DI FFT etc.
ENGINEERING DESIGN SERVICES

United Kingdom

Engineering Design Services offer a diverse range of expertise for the Industrial Engineering, Automation and Technical Documentation marketplace. Original equipment design, development, prototype build and test. Mechanical, electrical, electronic design to customer specifications. Electronic design, prototype printed circuit board manufacture and test. Modifications to existing equipment and control systems. Industrial Engineering and Automation Conveyor systems, product flow control, conveyor diversion, stacking, photo detector applications for product sizing, orientation and bar code reading. Technical documentation preparation from working designs, drawings, components. User, service, maintenance manuals, exploded view of assemblies and spare parts. Installed customer base in the UK and Ireland
INOBALT

Lithuania

Company INOBALT specializes in test and measurement systems and equipments for industrial use. Our product range covers everything from transducer to the full size production tests solutions. We design and manufacture customized test and measurement systems. Our services include automation design, manufacturing and commissioning. INOBALT measurement solutions are mainly used in product development, research and maintenance. INOBALT has a wide selection of devices from transducer to the high-end analyzers. Typical measurable values are temperature, vibration, pressure, rotation, force, torque, strain and noise. Systems are widely used in vehicle- and defense industry, universities, research institutes, electronics and in machine building applications. Production machines and devices should work without unplanned interruptions. High usability of productive machinery assumes predictive maintenance measurement to avoid expensive device damages and manufacturing interruptions.
PINI SERGIO

Italy

The garage Pini Sergio handles mechanical drive and electronic control diesel engines and air valves, overhaul and repair of injection pumps and injections, EDC systems (Electronic Diesel Control) and H pumps, diagnosis and repair of common rail systems, diagnosis, overhaul and bench-testing of injector pumps. Diagnosis of vehicle electronic systems and supply of multi-brand components.

DNC ELECTRONICS GMBH

Germany

Fanuc CNC parts specialists to the machine tools industry. Supplying Fanuc parts, such as drives, motors, monitors, system boards power supply units, batteries and much more. Unlike third party companies DNC Electronics GmbH also offer our Fanuc testing facilities and repair capabilities on servo amplifiers, spindle modules and ALPHA / BETA units. Contact us for 24 hour repair turnaround.
ERTEMES GMBH

Germany

ErTeMes GmbH offers efficient and proven expertise in the testing and measuring of technical systems that can be used in any technical sector. Our mission is to provide user-orientated and method-supported solutions for your measurement task that are tailored and pragmatic. Our customers benefit from our many decades of experience in testing and metrology, and our tried-and-tested methodology. We provide you with expert support to help you plan and carry out your test campaigns and analyse your measurement data. We develop proposals for determining measurement uncertainty and optimising your measurements. ErTeMes GmbH is proud to represent the HGL Dynamics Group in Central Europe. We not only provide you with innovative measurement hardware and powerful software solutions, but also highly qualified technical support. We can also offer you a tailored range of training courses and workshops on testing and measurement and other related areas.

Website See all products
HILSTER TESTING SOLUTIONS GMBH

Germany

The company HILSTER TESTING SOLUTIONS GMBH, is a Service Provider, which operates in the Engine testing and regulating equipment - electronic industry. It is based in Hamburg, Germany.
MAR-CAR ELEKTRONIKA SAMOCHODOWA DYMURSKI MARIUSZ

Poland

The company MAR-CAR ELEKTRONIKA SAMOCHODOWA DYMURSKI MARIUSZ, is a Multi-Category, which operates in the Car tuning equipment industry. It also operates in the Engine testing and regulating equipment - electronic, air-conditioned cars, electronics, and Engine testing and regulating equipment - electronic industries. It is based in Reńska Wieś, Poland.
MIKROTEST ELEKTRONIK KONTROL SISTEMLERI SAN TIC LTD ŞTI

Turkey

The company MIKROTEST ELEKTRONIK KONTROL SISTEMLERI SAN TIC LTD ŞTI, is a Service Provider, which operates in the Automation - systems and equipment industry. It also operates in the automatic electronic card test instruments, and electronics industries. It is based in Istanbul, Turkey.
BETA TECH

France

The company BETA TECH, is a Service Provider, which operates in the Engineering - industrial consultants industry. It also operates in the Onboard electronic systems, Design of electronic systems, Onboard electronic systems, and industrial electronic automatic mechanisms industries. It is based in Saint-Orens-De-Gameville, France.
DIGICONCEPT

Belgium

The company DIGICONCEPT, is a Multi-Category, which operates in the Onboard electronic systems industry. It also operates in the Computer engineering, Computer engineering, Custom software development, and Design of electronic systems industries. It is based in Angleur, Belgium.
TDM INGENIERIE

France

The company TDM INGENIERIE, is a Service Provider, which operates in the Onboard electronic systems industry. It also operates in the Design of electronic systems, and aeronautical engineering industries. It is based in Mérignac, France.
AD ELECTRICAL TESTING

United Kingdom

AD Electrical Testing are a family run business covering Essex and Hertfordshire. All electrical installations deteriorate with age and use. They should therefore be inspected and tested at regular intervals to check whether they are in a satisfactory condition for continued use. Such safety checks are commonly referred to as an EICR (Electrical Installation Condition Report). Also known as an electrical safety certificate, landlord electrical safety certificate, landlord's certificate or home buyer's certificate, EICRs will soon be required for certain landlords in the private rented sector. Tests are carried out on wiring and fixed electrical equipment to check that they are safe. A schedule of circuits is also provided, which is invaluable for a property.

Find quotes for

Filters

Results for

Service Provider - Electronic system testing

Number of results

29 Companies