reinforced fibreglass

... surface veil which, since impregnated with a large quantity of resin, seals the profile surface, ensuring the protection from UV rays and atmospheric agents and preventing the fibreglass from blooming. The high mechanical performance, lightness, ease of processing, resistance to chemical and atmospheric agents of the profiles, allow to create versatile and long lasting structures. ...

... of structural plaster (with the “structural sandwich” technique). Armaglass Connector Twin is mainly used in plastering reinforced with sandwich systems comprised of mortars and fibreglass mesh. The rigid central section is available in segments of different lengths (200, 300, 400, 500 or 600 mm), while the two threaded ends are fixed at 200 mm in length. The ends are thus able to be opened...

...We can supply you with highly wear-resistant stainless steel pipe bends which have a service life 10 to 20 times longer than that of standard stainless steel pipe bends. This high degree of wear protection is required, for example for conveying fibreglass-reinforced plastic granules or similarly abrasive media. suitable for use of highly abrasive products easy installation no stepped pipe...

... Material:Silicone - coated fibreglass Insulation Material:Fibreglass Protection class:II Cable length:4 meters Type of cable:HO7RN-F with Schuko-plug Fastening:Quick-release buckles control:Capillary pipe thermostat | optional: digital Thermostat Control range:0 - 90 °C (optional: 0 - 40 °C) Heating zones:1 Special sizes possible:yes...

...Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the most widely used single-piece unit series. The tank can be made, at choice, in treated and painted carbon steel or in AISI 304 stainless steel. The cover, in both cases, is manufactured in fibreglass-reinforced polyester. It is noteworthy for the ease of installation (limited civil engineering...

... different profiles to be activated. • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn) Length in millimeters:95 Weight in grams:105...

... with no direct visibility through - 100% waterproof seams. Wet storage properties - Robust die cast central joints, centre joint rubber protection (INTEGRATED) non conductivity & finger protection - No loose components – integrated frame & cover, fibreglass framework, non-conductive - Rubber protected feet for extended product life, 3off guy straps & tent pegs - Standard storage bag and all spare parts available Other sizes are available, please contact us with your requirements ...

...Filling compound such as epoxy resin filler (“epoxy putty”), fine filler or repair putty are used for corrosion protection, repairing scratches and unevenness in metal, wood and fibreglass-reinforced plastics. These coatings are mainly used in boat building.

...Hinge and caps fibreglass reinforced PA thermoplastic. Hinge pin stainless steel. Version: Hinge and caps black. Pin bright. Note: These hinges have a detent mechanism. This mechanism holds a door or lid open at three different angles or tightly closed. The hinges are available with or without guide tabs for aluminium profile slots. The loading values given for the hinges are non-binding...

... perfect solution for all these requirements as the high-quality device of German manufacturing was specifically developed for this field of application. Integrated in a corrosion-protected, fibreglass-reinforced plastic housing the DS 30 accommodates a silently running high-performance radial fan as well as evaporator and condenser with additionally polyester-coated surfaces. Portability:fixed Product:air Other characteristics:for swimming pools,wall-mounted...

CROSEAGIFTS LIMITED is a diversified consumer product development company with manufacturing base in China, specialize in the design and manufacturing of high quality custom souvenir, gift, collectable products since 1986, our wide catagory includes collectibles, home décor, stationery, snow globe, ornament, seasonal, apparel, drinkware, leather bag, wallet, case, watch strap, solar light, electro...

...PI2 is experienced in design, manufacturing and installation of sliding tank covers for all industrial sectors tough a water treatment plant is where they are placed the most. Covers are made in GRP, reinforced polyester by fiberglass. This composite material adds many benefits to the tank covers as light weigth and resistance. Our tank covers are customised and produced by the specific...

...fine-grain solid carbide pyramid end mill: burr style for grooving, right-hand cutting, shank without clamping surface DIN 6535-HA, suitable for fibreglass-reinforced plastics and foams, also available with diamond-coating (price on request)...

...Rectangular profile Triangular profile Fibreglass reinforced...

... maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs. Material:Composite made of solid-woven reinforced fiberglass Diameter:50-1200 mm length:200-600 mm Bolts, nuts:Steel, can be made of carbon fiber Weight:Much lighter than steel ones Operating pressure:Up To...

... over long periods ▪ Internal trigger function ▪ External trigger function ▪ Online data transmission ▪ Display lighting ▪ Programming by PC and notebook ▪ Integrated USB interface ▪ CE certified ▪ Calibration certificate on request Materials ▪ Housing made of fibreglass-reinforced PA Dimensions and Weight ▪ WxHxD: 106 x 235 x 53 mm / 4.17 x 9.25 x 2.09 in ▪ Weight: 530 g / 1.17 lbs Measurements / Display ▪ Pressure: in bar, PSI, mbar, kPa, MPa ▪ Temperature: in °C and °F ▪ Volumen flow: in l/min and US GPM ▪ Rotational speed: in 1/min and RPM ▪ Digital LCD display: 128 x 64 Pixel ▪...

Paul Joachim Prause founded the company Schichtstofftechnik Prause in 1974, which was renamed P. J. Prause Durotec GmbH in 1998. Prior to this, P. J. Prause significantly contributed to the technical applications of plastic leaf springs in Germany and Europe with the composite material Scotchply™ at 3M Deutschland. As a result, Prause Durotec GmbH has over 35 years of experience in the manufacturi...

Manufacturer of GRP profiles and grating. The fiberglass profiles are produced according to EN 13706. The plastic gratings are made according to DIN 24537-3. Standard profiles available from stock. Custom profiles can be implemented promptly through our own toolmaking. Even in the quotation phase, we support our customers in selecting and optimizing products. Prototypes using 3-D printing technolo...

Do you need specialized, ready-to-install products based on composite materials? Then we should get to know each other. Creative solutions with composite components / Ready-to-install GFRP / CFRP / customized / series products & unique items We are your system supplier for high-quality composite components. [Consultation and Planning] We don’t want to push composite materials on anyone. Replaci...

... that perfectly meets the operational and stylistic needs of the customer. La March has specialized in the production of car hoods, military tarpaulins, protective mattresses, hoods, waterproof tarpaulins, including those with reinforced edges, as well as custom tarpaulins and car covers. It offers the services of an excellent and skilled artisan workshop for the repair and replacement of car...

Broadwater Mouldings, is an innovative British design engineering and composites manufacturing company, which specialises in moulding high quality fibre reinforced plastics (FRP) and fabricating finished assembled FRP components for a diverse portfolio of customers in the UK, Europe and worldwide. Its experienced and highly skilled production and design teams are able to provide re-engineering...

We have been at the forefront of Water Taxi manufacture since our company was founded.We have designed a truly unique range of water taxis that are available to the worldmarket.The Dolphin water taxi range are the flagship models and have been since our company’s existence. We give the option to have your vessel built traditionally by hand lay-up or the resin infusion process, with cutting edge li...

Fiberglass was established in 1965 and since then we have been pioneers in the manufacturing of fiberglass reinforced polyester products, reinforced plastics, and thermoformed items. From our base in A Coruña, we supply both the National and International Markets, producing products aimed at various sectors such as industrial, chemical, construction, agri-food, aquaculture, and environmental. WE DESIGN AND MANUFACTURE ALL TYPES OF CUSTOM TANKS FOR AQUACULTURE Custom design and manufacturing of hatcheries.

...IBK-Fibertec designs, calculates, and manufactures components made from composite materials, primarily for high load-bearing applications. The manufacturing processes used include infusion technology, hand lay-up, and winding techniques. Our products: • Antenna masts / antenna cylinders • Plastic radomes • Wound tubes made of glass fiber reinforced plastic (GFRP) • Engineering offices for...

... with an interior liner made of thermoplastics, with large capacities in modules that can be assembled on-site. We also handle pool linings and other tanks. Thermal insulation for tanks made of polyurethane coated with fiberglass. We execute any type of compact wastewater treatment plant (ETAR) or other equipment in fiberglass reinforced plastic (PRFV) based on project specifications. We sell...

... with a polyester coating suitable for your pool should be considered to achieve perfect and lasting pool waterproofing. We invite you to explore the various photos of our pool renovations on our site, which we have completed using reinforced polyester for our clients. Our work involves the renovation of traditional pools and polyester shells, as well as the treatment of osmosis and hydrolysis for the polyester coating.

... of our company. We offer a wide range of polyester or epoxy resin products reinforced with fiberglass (composites), among which we highlight: - Pipes for water supply, sewage networks, and the chemical industry - Tanks and reservoirs for storing water, chemicals, and industrial products - Flat and corrugated sheets for roofing and partitions - Materials for public works - Civil engineering works related to the installation and assembly of aerial and buried pipelines made of fiberglass-reinforced plastic - Application and assembly of pultruded profiles and structures.

...ORM Omnia Resina Mazzotti s.r.l., founded in 1967, initially operated in the production of laminates and lightweight GRP (Glass Reinforced Plastic) coverings. Today, the company is a leader in the design, production, installation, assistance, and sale of biological plants for wastewater treatment and GRP (Glass Reinforced Plastic) tanks for the chemical and agri-food sectors. ORM's production...

PISCINAS CANO, OVER 20 YEARS MANUFACTURING FIBERGLASS POOLS, THE BEST QUALITY AT THE BEST PRICE. Piscinas Cano was established in the 1990s. Since then, Piscinas Cano has never interrupted its activity, always dedicated to the transformation of fiberglass. From our beginnings, our main activity has been in the manufacturing of monoblock (one-piece) pools made of fiberglass-reinforced polyester...

Pur Industrial Consulting Our company specializes in the distribution of materials and finished products for industry and trade. De-icing salts: We are a supplier of de-icing salt and can provide you with large quantities. Our current offer is sure to be of interest to your customers. Glass fiber reinforced plastics (GFRP). Gray board: Gray board for bookbinding, furniture industry, and as...