recycling of industrial systems

...Bio-oxidation system with bio-disks. Compact and modular solution, minimal energy consumption. M115 is the smallest series of monoblock units. It consists of a series of rotating disks complete with a tank and cover, both made of fiberglass-reinforced polyester. It is an economical version, easy to install. Typical applications: - condominiums - villas - small campsites - industrial premises...

...Recycling and waste management equipment encompasses a variety of specialized machinery and systems designed to efficiently process, separate, and manage different types of waste materials. These equipment play a crucial role in reducing environmental impact, conserving resources, and promoting sustainable waste management practices. We specialize in the design of recycling and waste...

...The neutralisation unit Neutrakon® SN90 is suitable for the neutralisation (increase of the pH value above 6,5) of acidic condensates of industrial condensing units up to 11 MW. Thanks to the single removable Neutra baskets, maintenance work is easy. The innovative matrix improves the flow of the condensate Made in stainless steel type 4VA With ball valve for easy maintenance Suitable for condensates of industrial heating units, CHP and flue gas systems up to 11 MW (1500 l/h)...

...which drive out the water from the screens, leaving the solid material at the surface of the screens. The material is conveyed along the vibrating screen deck and the expelled water separates away, leaving a drier, more manageable product in its wake.

...level the area, and lay the necessary foundations to prepare a site for the construction of a composting facility. - Installation: We install all necessary equipment and technological systems, including conveyor belts, composting chambers, and ventilation systems. - Commissioning: We ensure the complete commissioning of the composting facility, including testing and calibrating all systems to ensure optimal performance. Ventilation and Control Systems: - Installation of Ventilation Systems...

... cables and springs or guiding tubes. Depending on the application and the geometry of the basin, the FRMD can be mounted together with a MIX SL (directional submersible mixer) or MIX-AS (floating downdraft mixer) to help the flow towards the weir. Applicable for removal of oil, fats, bulking + aging sludge, recycling of scum in sludge stabilisation + biogas, SBR and ASP tanks.

...forestry, recycling, hydraulic technology, drive technology, construction machinery, construction equipment, fire service, energy technology, special solutions, cable car technology, railway technology, buffers, buffer plates, buffer systems, running rollers, mining accessories, mining technology, drilling platform, drilling technology, drill heads Die-forged parts: up to 130 kg Maximum length: 600 mm Steel grades: heat-treated steels, nickel-based, chrome-vanadium, molybdenum, alloyed, unalloyed, corrosion-resistant Special steel: titanium alloys, titanium-stabilized CrNi steels, molybdenum, vanadium...

... recycling and provide safer work areas. Available as a system integrated unit for use with chip processing/scrap removal equipment or as a stand-alone unit for volume reduction at the source. The development of automated scrap removal systems begins with reducing the volume of metal turnings. Milling, turning, screw machining, and swiss machining operations all produce waste that varies in size, length, hardness, and configuration depending on the tool, operation, and material characteristics.

... energy recycling, lowering the energy demand at individual stations, converting energy, or utilizing it multiple times simultaneously, and ultimately disposing of it sensibly. The result is a significant energy saving that leads to cost reduction and contributes to environmental protection. Feature: central, with heat recovery, for energy recycling...

... Tailored to the specific conditions, we offer you a customized technical solution that considers not only functionality and reliability but also energy efficiency. In a collaborative partnership with our customers, we develop economically viable air handling systems. Our range of services extends from planning, manufacturing, assembly, and commissioning to after-sales service. In addition to on-site balancing, we also supply spare parts and install...

...The installation of filtration systems equipped with both compressed air backwashing and vibrators is a highly effective solution for maintaining optimal performance in air treatment or dust capture in industrial environments. This type of system is particularly useful in sectors where particles and residues can quickly clog filters, such as in the wood, cement, metallurgy, or recycling industries.

...Compact yet efficient lights recovery separation systems comprising an adjustable vacuum head unit fitted over a stockpile conveyor belt or screen box. Suitable for removal of plastic or lights contamination from Compost, Bark, skip waste rejects and recycled aggregates. Electrical, Hydraulic and Diesel Engine made. Site Set up time 10 minutes & Custom made versions to adapt over any conveyor or screen box. Also comes with a universal fit conveyor ATTACHMENT...

...The Prostock is most commonly used for logistics (warehousing, storage), production, and maintenance, as well as for hangars. It can be utilized for covering ground remediation or recycling facilities, and due to its versatility, it has also been used to accommodate bakeries and kindergartens. The Prostock is equipped with a wide range of supplementary elements, such as doors, roller shutters...

...These systems fall into two main groups: 1. Separation systems for industrial recycling and waste treatment 2. Magnetic separation systems for food and pharmaceutical industries.

...As Inan Plastic Machinery, we manufacture recycling machines and serve the plastic recycling sector. In addition to crushing machines, we also produce recycling facilities and lines. For more information, simply contact the Inan Plastic sales team. https://www.inanplastics.com/urunlerimiz...

...The IBL-97 filter press is designed for the recovery of water or liquids and the dewatering of sludges or waste from: - Wastewater. - Wineries. - Carbide/mineral mines. - Filtering coolant liquids. Equipped with a pre-installation for blowing to prevent residual dripping.

...The NEWtainer® band dryer, with its unique design and air circulation, dries a wide variety of products flexibly across many applications and industries, such as: industry, agriculture, wood, sludges, recovery and recycling, food and chemicals, among others. Our drying systems are designed and built for industrial demands, ensuring long operating times and high loads. The standardized containers in various sizes provide a stable framework as well as a weatherproof and transportable housing.

...Are you looking for a water softener for your industrial process? You may be confident that when you buy a Grünbeck water softener, you're getting a high-quality, cutting-edge installation. Our GENO-mat® and Delta-p® softening systems have shown to be a trustworthy option for softening in hotels, trade, and industry. The Delta p series from Grünbeck, for example, has the lowest pressure loss of any water softener on the market. This saves you energy and water! Take a look at our various models. ...

...These mobile units allow for the suction and filtration of dust, vapors, and odors. They recycle purified air back into the premises. They are primarily used in laboratories or for small tasks such as gluing, cleaning, painting, sanding, etc. Their modular construction allows for different combinations based on filtration needs: - Pre-filters; - Absolute filters; - Activated carbon filters; - Filter clogging control; - Articulated arms. The advantages of this type of equipment: - Recycling of the suctioned air, - No restrictive duct network.

...Translation of all types of documentation for service companies, industrial maintenance, and the environment: services, modeling agencies, recruitment offices, services for equipped offices and industrial premises, trade organizations, patents and commercial protection, protection and security: services, recovery and recycling of various products, repairs of consumer goods, repairs of industrial...

...New washing plant for plastic material recycling, positioning of Folcieri mill, electrical panels, and new power lines.

...REDWAVE is your reliable partner for innovative and cost-effective solutions in the recycling and mining industry. We guarantee the most advanced sorting solutions to ensure the maximum yield of your recycling plant. The REDWAVE sorting machines ensure an economical and high output rate with the highest purity throughout the entire sorting process due to their powerful and industrial design.

...Decoupling for the plastics industry, Stripping of paint hangers and production parts Decoupling of motors and stators Pyrolysis ovens for thermal cleaning processes - Industrial pyrolysis ovens for thermal cleaning are used in many areas of industry, such as in the recycling of electric motors, cleaning components from powder coating systems, or tool and mold cleaning in plastics technology...

...This medium-sized baler has a height of less than 2 meters, making it ideal for limited spaces. The compaction cylinders are mounted on the sides of the chamber walls of the LH300 model, which makes it a plug-and-play baler with reduced setup times. The LH300 cardboard baler has a compaction force of 20 tons and can create bales from various materials, including cardboard boxes and plastic films. It is equipped with 4 strapping rolls positioned on a bar at the back of the baler for bundling the bales.

...Compact fully automated cross-flow filtration system for the treatment of industrial process and wastewater. Typical applications include degreasing and rinsing baths from metal part cleaning. This compact filtration system is versatile. It can be equipped with both polymer and ceramic membranes. Classic application areas include the maintenance and recycling of industrial degreasing baths and...

...BEKOSPLIT separation systems clean emulsified condensates that have arisen due to unfavorable starting conditions or specific lubricant/compressor combinations. In addition to compressed air condensate, other oil-containing industrial wastewater can also be treated. Water-insoluble organic substances as well as a variety of solid contaminants are removed from the water. Any existing heavy metals, dirt, and color particles are reliably adsorbed. Applications: Treatment of emulsified condensate...

...Our process cranes are tailored to meet the needs of your production processes. They are designed and built to specific requirements. In this way, we ensure the highest efficiency, availability and safety for your installations. We have extensive expertise and knowledge of our customers' specific industrial processes – in the paper industry as well as in process integration, in recycling and bulk...

...Our recycling process is based on proprietary process developments. Industrial waste materials are incinerated at high temperatures in two independently operating rotary kilns. Building on traditional sulfur and zinc chemistry, Grillo developed systems for recycling waste materials. Our recycling process at the Duisburg site is based on proprietary process developments. Industrial waste...

... solutions. Our systems have proven themselves over the years in various industrial manufacturing processes, ensuring clean exhaust air, such as in: • Paint and coating production • Pharmaceutical industry • Chemical industry • Automotive industry • Waste/recycling...

... boilers and steam, which increases the overall system efficiency. Waste heat boilers designed and produced for heat recycling are to be heated according to flow and process; Industrial facilities Power Plants In cogeneration plants It is used in organic rankine conversion systems (ORC). These heat recovery steam generators (HRSGs), which are used to convert steam back into electricity from steam turbine back-burning gas, are also called HRSG (Heat Recovery Steam Generator) in the Combined Cycle Power Plant (CCPP).