ptfe bearing

...High load capacity Good chemical resistance Machinable sliding bearing surface High speed capability Very good friction and wear properties Excellent resistance to contamination High load capacity: good chemical resistance Machinable: good friction resistance...

...Steel with porous-sintered tin bronze, which is coated with PTFE. The PTFE coating enables maintenance-free, self-lubricating operation with low friction. Type of lubrication: self-lubricating, maintenance-free Temperature range: -200 to +280 °C Max. sliding speed: dry: 2.5 m/s - oil-lubricated: 5 m/s Max. PV value: dry: 3.6 MPa m/s - oil-lubricated: 10 MPa m/s Max. dynamic surface pressure: 140...

...Wrapped composite sliding bearing Stainless steel / PTFE coated | Maintenance-free dry sliding bearing | Corrosion resistance | Chemical resistance | DIN 1494 / ISO 3547 NOX-MET® is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear...

...PTFE bearing with stainless steel counter surface Also available with PTFE bearing and stainless steel sliding plate...

... & Benefits * Available with electric or pneumatic drive * No lubricants, thus no contamination of the conveyed medium by lubricants * Optimized drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Sealing modules of the seal-less (DL) pump are interchangeable...

...particularly on metal surfaces Advantages and benefits Temperature range from -60°C to 120°C Resistant to all alkali and acid cleaning agents and disinfectants Good wear protection through PTFE NSF H2 registration Operating temperature:-60 °C → +120 °C NLGI grade:2 DN factor (dm x n):1,000,000 mm/min Base oil viscosity (40 °C):approx. 30 mm²/s Four-ball test rig (welding load):2,000 N...

...The composite bearing with PTFE from GGB, designed for filament winding, has been specifically developed for hydroelectric applications. The self-lubricating HPF bearing is a PTFE-loaded tape with a machinable anti-friction surface. With a high load capacity and a low coefficient of friction, the HPF filament winding bearing offers excellent resistance to shocks, angular loads, wear, and corrosion. This environmentally friendly self-lubricating bearing also exhibits good dimensional stability and does not swell upon contact with water. Contact GGB to learn more and get a free quote!

... fully synthetic base oil, this grease can continuously operate at temperatures nearing 180°C. Additionally, carefully balanced additives, enriched with solid PTFE content, confer outstanding anti-corrosion, anti-oxidant, anti-wear, and extreme pressure-resistant properties. These attributes are essential to ensure optimal performance in the most challenging and rigorous applications. Available in:180 Kg, 16 Kg, 15 Kg, 14 Kg, 4 Kg, and 1 Kg Item Code:VI9-3102...

...Lubricating and assembly paste formulated with mineral base oils, calcium soap and polytetrafluorethylene (PTFE) protecting against wear and fretting corrosion. Generally suitable for the lubrication of roller and journal bearings. Based on polytetrafluorethylene (PTFE):Protecting against wear and fretting corrosion...

...Multi-layer sliding bearings with steel backing and tinned surface protection | Sintered bronze inner layer with embedded PTFE running layer ADVANTAGES: ♦ self-lubricating ♦ maintenance-free ♦ ready for installation ♦ RoHS compliant ♦ REACH compliant FEATURES: ♦ suitable for all types of movement ♦ hydrodynamic operation possible with oil lubrication ♦ very good suitability for dry running ♦ resistant to many chemical substances ♦ good sliding properties (no stick-slip effect) ♦ low friction ♦ low wear ♦ high load capacity ♦ compact design...

...iglidur® X6: nano material The lifetime is up to six times longer than iglidur® J Thanks to nano-technology, iglidur® X6 has a service life of up to six times longer than the heavy duty iglidur® X bearing - even beyond 100°C. iglidur® X6 is available as cylindrical bearings and plain bearings with flange. Lubricants and maintenance-free Long term service temperature up to +250°C Up to 50% better press fit as iglidur® X High compressive strength Very good chemical resistance PTFE free...

The Plastic Experts... We are a very young and motivated team. Nevertheless, we have many years of experience in the development, design, and production of custom seals and other plastic components, specifically from PTFE. Plastic Solutions Various plastics are used, such as PTFE, UHMW-PE, POM, PEEK, PET, etc. Our customers benefit from our central location in Germany, which allows for very ...

...These thin-walled, rolled metal-polymer sliding bearings according to DIN 1494 / ISO 3547 are equipped with a sliding layer made of high-strength PTFE fabric [Type: RTW*]. The base material used here is also steel (RW), bronze (RWB), or stainless steel (RWN). These bearings are highly load-bearing and can be used completely maintenance-free.

...Sliding layer made of a mixture of PTFE and polymer fibers (approximately 0.01 to 0.03 mm thick), porous layer made of sintered bronze, carrier plate made of steel, corrosion protection layer made of tin • RoHS compliant • suitable for dry and oil-lubricated applications • very good bearing performance in oil-lubricated, hydraulic high-performance applications • particularly well-suited for intermittent operation (lifting and swiveling movements) • low water absorption and reduced swelling • improved wear and friction properties in lubricated applications compared to GGT50...

... bearings are manufactured exclusively through subtractive processes. In contrast to the mass production of injection-molded plastic bearings, this manufacturing method guarantees high quality, dimensional accuracy, and long durability. The following materials are typically used for the production of plastic ball bearings: Outer and inner rings: POM • PE • PPH • PETP • PTFE • PA • PEEK • PVDF • PSU Balls: Soda-lime glass • Duranglass • Stainless steel 1.4401 • Stainless steel 1.4571 • POM • PP • PVC • PEEK • Ceramic • PVDF Ball bearings made entirely of PEEK are also available.

...Lift castor system for a fast and flexible placing of plant and machinery or assembly tables; gear transmission ratio: 10:1 Max. Load: 500 kg per lifting unit Material: Housing: Die-cast aluminum with PTFE bearing Roller: Plastics PA with ball bearing Roller housing: Zinc plated steel Set: 4 lifting units 1 hydraulic drive unit 4 hydraulic pipes at each 3 m, pre-filled Extras...

...The GleitTherm ® high-performance materials are made from organic fibers and are irregularly pressed with special resins and lubricants based on graphite, PTFE, and Molykote. Due to this homogeneous structure, GleitTherm ® is equally load-bearing in all directions and is suitable for continuous operating temperatures of up to 600°C. GleitTherm ® materials are used where, in addition to shape...

... PRODUCT VARIANTS - as type FMD with sealing lantern and shaft seal - as type LMK with coupling and bearing lantern - as type FM - FU with built-in frequency converter for stepless speed regulation FEATURES - Three-phase motor in TMR stirrer design and reinforced bearing. - Speed range 800 - 3,000 rpm. - Express delivery possible within 24 hours (applies to stocked stirrer components)...

...Ceramic bearings Si3N4. Bearing cage PTFE. For most applications Si3N4 is the preferred material for ceramic bearings. Silicon nitride bearings are light, very hard and highly wear resistant. High and ultrahigh performance bearings are used in e.g. aerospace technology, metal production industries (high application temperatures), machine manufacturing, chemical industries (chemically aggresive...

... manufacturing processes, LEGROM® can meet even the most unique customer demands in the modern rolling bearing industry. Needle Bearings | Angular Contact Bearings | Linear Bearings | Axial Bearings | Ball Bearings | Thin Ring Bearings Thermoplastics for Cage Components PA 6 | PA 6.6 | PA 6T | PA 4.6 | POM | PPA | PES | PEEK | PAEK Fillers Glass Fibers | Carbon Fibers | Aramid Fibers (Kevlar) | Special Formulations with Mixed Reinforcement | Tribologically Modified Graphite, PTFE...

... trust in their long-lasting durability and exceptional performance, making them the ideal choice for critical industrial applications. Material:ARKPEEK-MOD Composition:10% Carbon Fiber + 10% PTFE +10%  Graphite + 70% PEEK Temperature:High Temperature Resistance Engineering:High Performance Chemical:Chemical Resistance Mechanical:High Mechanical Strength characteristics:Sliding, Abrasion & Wear Resistance Size:Custom...

...Maintenance-free dry sliding bearing, CSB-FR bronze fabric, PTFE and fiber coated, RoHS compliant Available as cylindrical bushings, flange bushings, and sheet material.

...Bearing and transport chain lubrication (dry band lubrication). There are five systems in operation, of which 3 are combined.

... clamp) to 300 mm (with two pipe clamps) Optionally as sliding bearings with PTFE or PA6 sliding plates Standard materials: Unalloyed structural steels according to EN 10025-2 S235JR - Hot-dip galvanized (other materials available upon request) Country of origin: Germany...

... specifications = Stainless Steel INOX 316 TI support + woven metal fabric with PTFE Self-lubricating ring with high load capacity Common diameters = 8 to 1200 mm - Thicknesses = 1; 1.5; 2; 2.5 mm Applications = In all corrosive environments: petrochemicals, chemicals, offshore, food processing, packaging, machine tools, dosing pumps, shipbuilding and mechanical constructions, vehicles ...

... steel 1.4571 with bonded PTFE fabric, alternatively made of high-performance steel 45S20 galvanized; available in internal, external, right-hand, and left-hand threads, in standard and fine threads. All joint bearings and joint heads for motorsport are available from stock. Joint bearings and joint heads in inch dimensions are available upon request. As accessories for all joint heads, we also offer matching lock nuts, rubber protective caps, seals, and reducing sleeves to increase the tilt angle.

...Plastic sliding bearings made of Moldflon® or highly wear-resistant Polytetraflon® PTFE compounds | Wide temperature range, FDA-compliant materials | Excellent chemical resistance Plastic sliding bearings from ElringKlinger Kunststofftechnik - Excellent chemical resistance - Wide temperature range from -100 °C to +250 °C - Suitable for high peripheral speeds in dry running - Suitable for high p...

... carriers. The vacuum-compatible encoders are distinguished by the following features: • Air vents • Production in a clean room • Specialized cleaning and packaging • Cable with PTFE insulation and tin-plated copper braiding...

...maintenance-free, dry-running according to DIN ISO 3547 Permaglide® strips PAS P11 Usage: maintenance-free, dry-running applications Material: P1 according to DIN ISO 3547-4 • Steel carrier back with sintered bronze and sliding layer made of PTFE with additives • Contains lead Standard dimensions can be found on our homepage. Didn’t find the right size? Contact us for your custom sliding bearings made from original Permaglide material. RoHS compliance: no...

...Here too, whether it's a standard or custom solution, we offer you the complete range of high-performance plastics. PTFE and Plastic Parts Here too, whether it's a standard or custom solution, we provide you with the entire selection of high-performance plastics such as PTFE and compounds, PCTFE, PEEK, PTFE and plastic parts, e.g., turned, milled, and stamped parts, semi-finished products, corrugated hoses, flat seals, bearing bushings, basically everything to fully meet your needs.