pressure transmitter

...The DMP 331P pressure transmitter is designed for use in the food industry and pharmaceuticals. Its compact design of the process connections, hygienic and sterilizable, ensures exceptional performance in terms of accuracy, temperature behavior, and long-term stability. The modular device concept allows for the combination of various process connections with different filling media and...

...The NIH100 pressure transmitters are based on the principle of silicon piezoresistive measurement. Utilizing advanced microprocessor technology and digital communication, and applying the principle that static pressure is proportional to the depth of the liquid level, the transmitter converts the millivolt signal from the sensor into a current and voltage signal. It then communicates with a PC...

...Electronic pressure sensors are used to measure pressures in fluid technology systems. The pressure sensors of the HDT series are designed for general industrial applications and stand out due to their accuracy, reliability, corrosion resistance, and mechanical robustness. 2-Wire: 4...20mA 3-Wire: 0...10V Fluid connection: G1/4 DIN 3852-E IP65: Angle connector DIN 175301-803 A IP67: M12x1...

...Differential pressure transmitters for measuring differential pressure and relative pressure (overpressure or underpressure). Typical applications include measurements in mobile and stationary filter devices, as well as in extraction, conveying, climate, ventilation, and filtration systems, as well as cleanroom technology and industry.

... 43650A or a 4-pole M12 x 1 connection is available. Measurement ranges: 0 … 0.05 bar to 0 … 500 bar Measurement type: Pressure measurement against atmosphere Output signal: 0 … 10 V / 0 … 5 V / 4 … 20 mA Operating temperature range: -40 ... +105 °C Burst pressure/protection: 900 % above nominal pressure Dead volume: 0.5 cm³...

...Bourdon brings mechanical pressure measurement into the digital age This innovative measuring instrument adapts to any platform for process monitoring, machinery, and preventive maintenance of plants supported by a LoRa radio protocol. Key applications include pressure measurement and monitoring for refineries, the petrochemical industry, and biodiesel plants. The instrument is aimed at applications used in the treatment of clean and wastewater, energy production and transmission, process industry, mechanical engineering, and construction.

...Measurement transmitter designed to convert any notnormalised DC voltage or current signal into a normalised signal while providing galvanic insulation. o Voltage or current input o Galvanic isolation 2 kV RMS. 50 Hz during max. 60 s between input, output and power supply o Selection of input and output ranges by jumpers behind the front plate o Wide range of power supplies o Rail DIN mounting...

...The pressure sensors with M12-connection are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...6 bar pressure measuring variant:relative pressure Burst pressure:18 bar Electrical connection:M12-Connector Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell...

...The highly dynamic and compact 21PHB pressure transmitter is suitable for use in liquids and gases, and can process pressure changes with a bandwidth of 20 kHz. This is achieved by means of the continuous analog signal that is adjusted by a digital circuit in real time and is amplified to a standardised 0...10V signal. The miniature sensor head with a fine M6 thread can withstand temperatures of...

...Process connection with thread for direct screwing Design with internal membrane Pressure compensating parts screwed Universally applicable...

...Pressure transmitter for general applications in air and gas From -1 ... 0 bar to 0 ... 200 bar OEM applications Outstanding price/performance ratio Compact and lightweight Manufactured in stainless steel or brass...

...The RPT 200 Transmitter enables accurate measurements from fine vacuum to atmospheric pressure. With its robust metal housing and digital interface, the transmitter is particularly suitable for use in vacuum systems and installations.

...Matchbox-sized pressure transmitter with an analog 0 … 10 V voltage output and a wide supply voltage range of 12 to 36 V, available in pressure ranges between 5 mbar and 2 bar.

... pressure transmitter series are used. Advantages: + High overpressure safety even in the smallest pressure range + Robust measuring sensor thanks to excellent synergy of membrane technology and ceramic element + Easy installation and commissioning + Maintenance-free + High protection class Medium: Air and neutral gases Pressure range: -5 ... 5 mbar / 0 ... 10000 mbar Output: 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA Accuracy: < 1.0% FS Electrical connection: Screw terminals Pressure connection: Hose fitting conical 4 ... 7 mm or quick coupling Installation: Screw mounting...

...Application Areas Pressure transducers for original equipment manufacturers, general pressure measurement tasks in hydraulics and pneumatics Pressure sensors: Standard version...

...The PDP combination pressure transducers feature an extremely overload-capable capacitive differential pressure sensor as well as a piezoresistive sensor for static pressure.

... high-pressure version for monitoring tasks in compressed air systems is available, capable of operating at pressures up to 150 Bar, featuring a ½" screw thread. For outputting measurement values, both analog and digital interfaces are available, with the possibility of custom adjustments for the measured variable (dew point, relative humidity, ambient temperature) in analog output as a 4-20mA current loop or 0-5V voltage output, as well as a combination of several simultaneously outputted measured variables at the digital interface.

...The cable transmitter µCAN.1.sg-TRS is the universal data acquisition module for standard analogue full bridge strain gauge signals. The bridge is powered via the transmitter. The TRS family is ideally suited for being integrated directly in the measuring lines at a short distance from the sensor. Voltage ± 20 mV:Supply voltage 4.5 V Strain gauge full bridge:Accuracy 0.2% (FS) Resolution 16-bit (1 µV):Sampling rate up to 1kHz Fieldbus CAN classic / CAN FD:Protocol CANopen / CANopen FD / J1939...

... ± 2 °C (± 3.4 °F). The output is configurable to display in °C dewpoint, °F dewpoint, ppm(v), ppb(v), g/m3 and lb/MMSCF. Incorporating the unique AutoCal function designed by Shaw Moisture Meters, allowing the user to ensure accuracy between laboratory calibrations by checking the span of the hygrometer and correcting for any deviation. This high performance dewpoint transmitter can cope with extreme environmental conditions, offering protection to IP66 NEMA 4X. Its rugged construction has been tested to withstand 35,000 kilopascal (350 bar) maximum pressure.

... % RH and -40 °C to +125 °C) — Very low drift — Very stable at high humidity — Directly interchangeable without recalibration — Pressure-resistant version (up to 16 bar) available upon request Installation type: integrable, built-in Application: for OEM applications, air conditioning, industry, concrete, and more Additional features: digital, with temperature measurement, high precision...

... applications. With a response time of 125 ms, this transmitter ensures high accuracy and stability under all process conditions. We are the only manufacturer that performs a complete 3D linearization of its differential pressure transmitters, taking into account differential pressure, ambient temperature, and static pressure. This guarantees precise measurement even under changing conditions. The OPTIBAR...

...Manometers and thermometers are suitable for various applications in pressure and temperature measurement. We offer solutions for both gaseous and liquid measuring substances. The range includes capsule, diaphragm, or bourdon tube manometers and measuring devices in various materials, from standard models to stainless steel versions for use in corrosive environments, as well as electronic measuring technology.

...This pressure transmitter is particularly suitable for measuring the volumetric flow of town gas or other natural gases such as butane, methane, etc., in industrial furnaces or combustion systems. The device does not create an ATEX zone, as it poses no ignition hazard due to constructive and technical measures. The measuring ranges are scalable from 10 to 100%. This can optionally be done via...

...The DAIP Series incorporates a heated sensor tip, which limits the potential for sensor damage relating to the membrane, resulting from installation or removal of the pressure transmitter. Additionally, it offers the comfort of the DAI series in combination with temperature measurement, allowing for heater control. The Gneuss patented heated sensor tip allows the sensor to be easily removed...

...The AMS 4712 series consists of ready-to-install pressure transmitters suitable for absolute pressure, relative pressure, and differential pressure measurement. They are designed for industrial applications and feature a current output. The transmitters are unilaterally media-resistant due to back pressure compensation and are delivered in a robust and compact plastic housing (IP67) for quick...

...Electronic differential pressure transmitter including two ceramic sensors and a transmitter The Deltabar FMD71 electronic pressure transmitter is a differential pressure system used to measure the pressure, level, volume, or mass of liquids in pressurized tanks or distillation columns/evaporators. The high-pressure (HP) sensor measures the total pressure. The low-pressure (LP) sensor measures...

...Pressure transmitter systems are made from various materials, depending on the type of measuring substance or application. However, the standard material is exclusively stainless steel. The pressure transmitter separates the measuring device from the measuring substance and ensures the nearly instantaneous transmission of pressure to the measuring device by filling the system with a pressure...

... transmitter is the proven GEMÜ CleanStar® technology • Operating medium is hermetically separated from the measuring transducer by a patented PFA double membrane • Free positioning of the manometer by 360° allows for individual user options • Production, assembly, calibration, and packaging in a cleanroom ISO 6 • Low dead space Connection type: Flare; NPT thread Drive type: without drive Max. operating pressure: 10 bar Max. medium temperature: 60 °C Min. medium temperature: 5 °C Nominal sizes: DN 4; DN 6; DN 10; DN 15; DN 20; DN 25...

...Different types of pressure transmitters exist: differential pressure transmitter for measuring a pressure difference ΔP but also a relative or absolute pressure transmitter. For more specific applications, it will be necessary to use: a differential pressure transmitter to correct variations of pressure and temperature of a gas two transmitters for the same differential pressure flow element to increase the measuring range For more details on these cases, please see the Frequently Asked Questions tab on this page.

...Description Technical Data • Materials: aluminum, acetal resin gears • Max pressure: 70 bar (K400-I and K604-I), 20 bar (K700-I) • Ports: 1/2'' H (K400-I), 1" 1/2" H (K604-I), 2" H (K700-I) Features and Performance: • Electronic oval gear flow meter with pulse emitter Fluid: Antifreeze, Diesel, Oil Technology: With gears Atex: No Flow rate: 1 to 30 L/min - 15 to 150 L/min - 25 to 250 L/min Port: 1/2'' F, 1"1/2 F, 2" F Body: Aluminum Mechanism: Acetal resin Usage: Diesel, oil, antifreeze...