pressure flap

... Scheuch COMPONENTS, we develop and manufacture swing gates in all dimensions. The largest gates produced in our company measured 622 x 622 mm. Regardless of their size, all Scheuch COMPONENTS industrial gates are characterized by their high quality in design and production. Our swing gates withstand thermal loads of up to 250 °C when sluicing goods in and out of pressure differential spaces, such as those found in filter systems. Max. Temperature: 250 °C...

... (e.g. hand nozzle, flap valve etc.) possible - Suitable for use in hazardous areas zone 1 Flow rate::max. 240 l/min Delivery head::max. 13 mwc Viscosity::min. 1 mPas - max. 1000 mPas Outer tube diameter::max. 41 mm Immersion length::for horizontal use Materials outer tube::Stainless steel Media / Fluids::Solvents, Aqueous salt solutions, Petroleum products, Highly flammable media Seal::with mechanical seal Container::1000 l IBC, Container with floor drain...

...Stainless Steel Check Valve with Disc All Positions PN 40 Dimensions: DN 15 to DN 100 Connection: Between flanges ISO PN 10/16/25/40 Min Temperature: – 20°C Max Temperature: + 200°C Max Pressure: 40 Bars Features: Disc valve - All positions - Metal/metal sealing Material: Stainless Steel...

... negative (for infectious patients) pressure is generated inside the room (easily up to 20 Pascal). Filters used in this Isolation Unit are of HEPA14 or ULPA15 quality, leaktested and airtight secured. – Automatic differential pressure regulation – Automatic pressure loss alert – Filter detection by ID code (filter condition) – Complies with CDC guidelines (Centres for Disease Control and Prevention) Used in hospitals, clinics and medical facilities Immune-compromised patients Oncology, haematology, neonato...

...The AR60 is an aluminum air vent that self-regulates and features thermal break. This air vent is designed for both windows and doors made of PVC and aluminum. The AR60 air vent is equipped with a self-regulating airflow system. This intelligent air vent has a pressure-regulating flap that ensures a constant supply of air indoors, regardless of the weather conditions outside. The Renson AR60 air...

... the sand silo). Advantages of this installation: - The contact pressure of the measuring medium on the sensor surface remains constant from a certain silo fill height - Self-cleaning due to material flow over the measuring surface The measuring electronics are fully encapsulated in a high-quality stainless steel housing. The probes are available with various wear protection surfaces: - 3mm...

... flap and an automatic opening system. Main Features - Airflow of 21,000 m³/h to 39,800 m³/h - External structure made of galvanized steel. - Galvanized steel pressure relief flap. - Stainless steel AISI 430 BA blades. - High-quality bearings. - Three-phase electric motor IP-55 - V-belt drives. - Aluminum magnesium drive pulleys. - Motor support with tensioner. - Roof supports. - Air intake with protective grille. - Rain shield.

...Application Areas: Steel Industry / Industrial Combustion Technology / Renewable Energy Technology Single-piece housing, tightly sealed, with a central flap disc. With blow-out-proof shaft. Design for clamping between flanges according to DIN EN 1092-1. Length according to DIN EN 558-1-R20. Leak rate A according to DIN EN 12266-1. Max. permissible operating pressure 10 bar, from DN 350 ≤ 1.5 bar...

...Equipped with exterior spring load to more quickly close the flap and avoid flap impact Type RSK-UD: Bypass line with pressure shock damping valve to reduce/avoid pressure shocks Type FTUD: a combination of the above types to optimally protect the pumps in case of a power outage, etc. Housing:EN-GJL-250 (GG 25) Coating:Acrylic combination paint...

... Regulation 305/2011, which is duly certified. Options such as integrated rainwater drainage or insulated flap blades complete the system. Function: shut-off, regulation, and pressure relief Cross-section available in round or rectangular design Design: flange flap Number of flap blades: single or multi-leaf Medium: gaseous, pressure ranges up to 0.5 bar, temperature ranges -50 to +800°C Ex-protection optional Sealing: shaft packing also compliant with TA-Luft / O-ring Sealing: flap blade metallic, sealing / soft material,...

...Check Valves Fcv - Goodridge Alloy Check (Flap) Valve for all low pressure Fuel and Oil systems...

...Flap valve seals are used in various industries, including chemical, pharmaceutical, and food industries. The low-pressure deformation residuals, along with physical properties such as low friction and high elasticity, ensure a long service life.

...Two front pockets with bellows, two top pockets with flap closure and velcro, two slanted, two medium height pockets with zip closure, pen compartment and an interior pocket with velcro to keep everything accessible and available. Includes internal back zipper to facilitate customization of embroidery and transfers Ideal for workwear, work uniforms and promotional textiles composition:65%PES 35%CO 250GR/M21...

... applications. Here we can only show the tip of the iceberg. Challenge us! Nominal diameters::DN 50, DN 80 Length::EBRO factory standard Flange standards::Bolt circle corresponds to connections in tank construction Flange facing::EN 1092 Form A/B, ASME RF/FF Marking::EN 19 Leak testing::EN 12266 (Leak rate A), ISO 5208 Category 3 Component testing::for use according to GGVS, GGVE, GGVSee Temperature range::-20°C to +160°C Max. operating pressure::max. 4 bar Housing::Aluminum alloy GD-AlSi9Cu3 (3.2163) Gasket::PTFE Disc::Stainless steel G-X6CrNiMo18-10 (1.4408)...

...Corrosion resistant, light Aluminium heat exchanger Efficiency upto %109 Five capacities options (70 , 95, 125, 155, 190* kW) Cascade system with 16 boilers 17 modulation ration Workıng pressure 6 bar High combustion performance with low exhaust emission Different zone controls with Siemens control panel Compability with Open Therm ve BUS comunication systems External chimney flap Low noise level Easy to use and maintenance...

...Infusion device with ventilation for pressure and gravity infusions • Sharp piercing needle for easy insertion even into hanging containers • Bacteria-tight ventilation with closure flap • Handy drip chamber design with highly transparent viewing window and flexible pump chamber for easy and quick adjustment of the liquid level • 15 µm filter in the drip chamber to protect against coarse particles • Pressure resistance up to 2 bar and suitable for use with infusion pumps designed for a 3 x 4.1 mm tube • Luer Lock connection • Tube length 150 cm • Latex and DEHP free...

...WB abrasive non-woven fabric based on corundum (alumina), zircon (ZK), silicon carbide (SIC), ceramic (KK) for the processing of wood and lacquer surfaces, plastics, and metals. Available as non-woven belts, sleeves, rolls, discs, hook-and-loop discs, coarse cleaning discs, flap discs, flap discs combined with abrasives, discs with finished connections – rotary connections or push-button...

...Mulitplex-Power-Cut Ceramic High-Performance Flap Grinding Wheel Ø 125 K 40 Straight design Newly developed ceramic high-performance grain Newly developed technology in the scattering type Higher material removal rate with lower pressure and less heat generation cooler grinding, no discoloration on stainless steel Free from Fe – Cl – S therefore also suitable for processing stainless steel, e.g.: in the pharmaceutical industry and food industry.

... dual plate check valve. Do not install the valves directly onto a pump flange. Pressure range PN10 … PN16, see data sheet Temperatur range 0°C … +80°C Media Non aggressive liquids Material Body: GGG-50, FBE-coated Flap: Steel, nickle plated Stem and spring: Stainless steel 1.4301 Seals: EPDM The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

...Intermediate Flange / End Fitting Application Area: Silo / Tank Vehicle Construction Installation Situation: Intermediate Flange / End Fitting Medium / Aggregate State: Liquids, Bulk Goods, Gases Nominal Diameter: DN 50 – DN 200 Pressure Range: -0.8 bar to +6 bar* Special Feature: Maintenance / Repair Friendly Materials Ring Body: EN-AC 46200 / EN-AC 51100 Disc: 1.0619 / 1.4408 / 1.4408 HP...

... drive, an air supply is required. An electro-pneumatic control unit including pressure monitoring is included in the delivery. Type: AK-L Component description: Material Housing: PVC, PP, PE, PVDF, ECTFE, PP-FRP, PVC-FRP, PVDF-FRP Disc: PVC, PP, PE or PVDF Shaft: 1.4301 coated with plastic Seals: EPDM, FPM, FEP coated. Connection type: with flanges according to customer specifications Pressure: Standard: max. 0.1 bar overpressure or underpressure Temperature: PP/PE 80°C, PVC 60°C, PVDF 120°C...

...The HP series offers the right solution for high temperature and pressure loads. Nominal sizes DN 50 - DN 1200. Design: Double-acting pneumatic linear actuator Piston diameters: Ø 100 Ø 125 Ø 160 Ø 200 Ø 250 Ø 320 Control pressure: max. 10 bar Temperature range: Standard: -30 to +100 °C High and low temperature versions available upon request Stroke range: from 90 mm to 1030 mm Force range...

...The CORAL non-return valves are equipment designed to withstand explosion pressure. They are capable of preventing the transmission of the dangerous effects of an explosion, a pressure wave, and flames in one direction, while isolating areas with potentially explosive atmospheres. In the opposite direction, the valve allows the transport of flammable powdery materials in potentially explosive...

...● Stainless steel handwheel ● Limit switch ● Closing stroke limiter ● Opening stroke limiter ● Operating rod extension ● Locking device (locking) Pressure class: PN16 - 16 bars Body material: stainless steel / special forged alloy - 1.4435; 316L; Hastelloy MD: MD30-202 Actuation: Manual; pneumatic actuator Sealing: Embedded membrane with load distribution spiral Surface condition: Electropolished...

... replacing fiber and grinding discs. - The durable heavy Y-woven backing features controlled, even wear, allowing for full utilization in medium to high pressure applications. - Integrated grinding aid reduces grinding temperature on heat-sensitive alloys, thereby extending lifespan.

...you can quickly reverse the motor's direction of rotation before separating your workpieces from the abrasive media. This ensures that no workpieces or abrasive media are left on the gate that could get trapped between the separator flap and the working channel. Ideally suited for ball polishing and pressure deburring The CB circular vibrators stand out thanks to their robust steel...

...Aeromat midi: an intelligent passive ventilator! It is particularly appealing due to its double mechanical closure structure, but it also impresses with its air flow limitation thanks to a flap and the integrated mosquito net in the outer grille. Thanks to its significant air flow, based on natural pressure differences, and its effective acoustic insulation, the passive ventilator allows for...

... well as the camera-based O-ring assembly inspection. Parts of the cell accessories: - 2 pcs. KUKA KR 210 R2700-2 - 2 pcs. Adapter plate grippers - Safety fence enclosure - niO flap - Camera monitoring for O-ring inspection - Double pump station - Volume dosing unit with pressure monitoring - Needle seat dosing valve with special nozzle. For more features and application examples, please visit our website.

...This is 3 port normally closed valve. Upon actuation, it controls linear actuator attached to the flap of the exhaust brake valve 12V or 24V DC Pressure rating 0 -8bar and 12 bar Compliant to IP6K7...

... or custom sizes can be made according to customer specifications. Water-based cleaners are used. Equipment Electric direct heating, high-pressure submersible pump, radial wheel with direct drive, stainless steel nozzle system, drying unit, steam extraction, coarse filter basket, door flap.