pp tubes

...Are you looking for packaging that combines metallic design and sustainability? Then the PirlONE SHINE is the right choice. All components of the tube are made from polypropylene (PP). This makes the tube recyclable. With the PirlONE SHINE, you get packaging with a high-quality and unique tactile experience. The metallic effect of the tube in either a matte or high-gloss finish showcases your...

...PP (Polypropylene) 16 x 100 Non-Sterile The 16x100 conical tube is made of PP (Polypropylene) material and has non-sterile properties. Consumables are essential products used in laboratory environments that enable various analyses to be conducted. These materials play a critical role in the reliability and accuracy of experiments. Consumable types such as Petri dishes, blood tubes, and conical...

...Two-way and three-way valves are used for the transfer of liquids or gases to release flow, block it, or change its direction. Material: PP/PE, PVDF...

... PVC-C, PVC-U, PP, and PVDF. The pressure-temperature curve is of great importance for the proper selection of a plastic valve. The nominal pressure of thermoplastic valves is generally determined for water at a temperature of 20°C and for a lifespan of 25 years. It should be noted that the higher the temperature, the lower the maximum service pressure, and that not only the transported fluid but also the ambient conditions of the piping system influence the pressure load.

... polypropylene laminate, making it highly recyclable. The PP laminate tube is the perfect packaging solution for food or pet food products that require a long shelf life without refrigeration. Size: 100% custom formats Height: Custom manufacturing Width: Custom manufacturing...

...PP tubes available in various designs upon request. Mini tubes made of natural PP for single use (Uni-dose). After filling and sealing, the tubes can be autoclaved at 121°C for 30 minutes. Mini tubes are only sterilizable once. Also available pre-sterilized.

... diameter and 105 mm high. On request it is possible to make a special tube holder for tubes with a diameter of 20 mm and a height of 70 mm. However, it is not possible to seal tubes with a diameter of less than 20 mm and a height of less than 70 mm. Length of sealing bars:mm. 405 Sealing width:mm. 4 Sealable material:PE, PP, PVC Tubes diameter: 20,25,30,35,40,45,50 mm (only one type)...

...Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion profiles,pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides,we can produce plastic extrudsion products from materials of PVC, ABS, PP,PE,PC,PMMA, AS /PE... The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure...

... comes with 3 interchangeable tubes. Each tube measures 18 centimeters in length, allowing them to reach the bottom of the bottle without any issues. Suitable for 3, 5, 6.25, 8, and 10-liter bottles, as it has a neck adapted to the standard 48-millimeter format. It also includes an adapter for 38-millimeter necks. Both the tubes and the water pump are made from Polypropylene (PP), a highly durable material that is completely safe for contact with water and does not leave a plastic taste.

...Products in the form of profiles (strips, blocks, seals, tubes, hoses, spirals, cords, etc.) are used in various industries including furniture, electronics, automotive, and construction. We manufacture the profiles through extrusion and co-extrusion from various materials: • NOVOPLAST® – soft PVC • NOVODUR® – hard PVC • PP, LD-PE, HD-PE, PS, ABS, TPE, PA, etc. The pressed products can be finalized directly in the production lines: cut to the required length, cut out, trimmed, and adhered with tape,...

...cylindrical, painted white on the outside, double inner protective coating, end rubber coating, with screwed closures made of white PP...

... printing equipment or prefers the ease of this service. With machines to print on mandel carried products, flat surfaces as well as cylindrical products, we can offer this service for a wide range of items. Furthermore, our range of heat trasfer technologies opens us up to print not only on differend shapes, but also different materials. From PP to ABS, glass, ceramics, wood, paper and many more. Reach out to us with your product or idea and we will come back to you with an honest answer.

... available in the form of tubes with or without side folds. Choosing the right film allows you to optimally present your products. Half-tube or tube film • for automatic packaging • in any widths and film thicknesses • material made from PP or PE or composite films • tube, half-tube, tube with side folds • unprinted or printed • printed up to 10 colors in flexo or gravure printing Color: Transparent...

...PP-R Pipes, fittings and valves, PE-RT and PE-X pipes and brass fittings and valves...

... textiles, the Triad Wedge Welding System is ideal for your in house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, etc. The Triad can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non supported material in thickness of 5 to 100 oz. and is designed to be portable, versatile and user friendly. HOW DOES IT WORK? The welding of various thermoplastics occurs by a combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers.

...PA & PP Flexible Corrugated Tubes...

... will work together with you to find the right solution. Whether for consumer or packaging films, PP/PE films, stretch and construction films, plastic or metal films, aluminum, laminates, labels, paper, printed materials, hygiene products, rubber, fabrics, carpets, plastics, filaments, strapping tape, yarns, adhesive tape, or wire... just to name a few applications. Trust in our know-how!

...For every packaging, there are suitable closures; PP Plastic or metal closures are an essential component of any container. A screw cap is used to seal containers such as tubes, plastic cans, screw jars, and beverage bottles airtight, which are equipped with a thread at the opening for this purpose. Without a closure option, no filling can take place. Item number: 12053173 Neck: 25/1...

... made of plastic (ABS) while the internal cartridge core is oxidized aluminum. Clients worldwide are welcome to select our customized services including various decorations. Item Code:LSS-A1353 Dimensions:L13 x W13 x H115.7mm Volume:1.3g Material:Cap - ABS / Base - PP & ABS / Cartridge Core - ALU Colour:colour match Minimum Order Qty:12,000pcs Cup:6.5 mm...

...PPR-C Pipe Underfloor Heating Systems PPR pipe and fittings PPR pipe and fittings PP-R underfloor heating system...

Kayalar Group was established in 1970 to produce semi-manufactured materials for armatures. Subsequently, Kayalar Pres Ltd. Şti. was founded to continue its activities by manufacturing semi-products and fittings made of brass. The KAS brand name was registered in 1994, allowing us to present our radiator valves and brass rakor products to the domestic market under our own brand. In 1999, our group...

... materials/maximum operating temperature: PP 100°C PA6 120°C PA12 120°C Application automotive, agriculture and construction engines; for ventilation applications for air filters or fuel systems Our corrugated tubes with integrated connecting geometries (bayonet lock) are made to customers specifications to guarantee reliable connections and to ventilate or drain duct systems. This saves weight and reduces the risk of leakage. The snap-in geometry allows for time-saving and user-friendly assembly and disassembly. Of course we offer a wide range of accessories and nominal sizes.

...The Cup is made of food safe polypropylene (PP) and is 100% recyclable. The smooth yet very resistant material guarantees a good grip and optimal stability. TOP CUPS come in 18 different colors and are colorintensive and shiny. TOP CUPS fit all standardized cup dispensers. Burns without residue. Units of packaging Made in….:Size: 225ml, 50 pieces / tube, 30 tubes / carton, Sales Unit: Carton...

...New generation PP-RCT installation pipe with less coefficient expansion.

...MPLAST Ltd. is a Bulgarian company specializing in the production of PP-R pipes, fittings, PP pipe mute systems, PE-RT pipes, and PE-RT/EVOH/PERT for the construction of water supply and sewage systems, as well as heating installations. The company manufactures pipes and fittings made from polypropylene random copolymer, designed for water supply installations within buildings. To meet the needs of its clients, the company offers pipes for both hot and cold water. These products are made from high-quality materials sourced from leading European manufacturers.

...Plastic tubes / test tubes made of PP (polypropylene), available in various volumes (4.5ml, 5ml, 10ml, 13ml, 20ml), with and without rim, cylindrical or conical, with screw cap or without. Matching stoppers / plug stoppers made of PE (polyethylene) in diameters of 12mm and 16mm.

...This connector is specially designed for mesh-reinforced flexible tubes. As all of the Generation+ connectors, it consists of only two parts: the connector body and the pressure screw. The clamping ring is incorporated into the pressure screw. An extra clamping ring is not required. The thread and connecting sleeve are integrated inside in the connector body. The advantage: they cannot be damaged and are protected against external effects. Pressure Stage:PN16...

Plastherm; Plastherm is one of the leading companies in its sector that produces PPRC pipes and fittings, as well as PVC pipes and fittings. Since its establishment in 1992, Plastherm has adhered to the principle of maintaining quality at every stage, from product manufacturing to the final consumer, and offers more than 350 product types. Facility and Product Diversity Plastherm's production fac...