plastic testing machine

...Innovative Solutions in Electronic Sector At Take Craft Engineering, we have successfully delivered numerous projects in the electronics sector, offering innovative and high-quality solutions tailored to the rapidly evolving needs of the industry. From the production of precise and complex electronic components to assembly and testing services, we provide a comprehensive range of services.

...trapezoidal curve, or needle pulse. Our test stands are characterized by exceptional ergonomics and are designed in the Poppe + Potthoff machine style. Pressure ranges: 600 bar, 1,500 bar, 3,000 bar, 4,500 bar, 6,000 bar Max. test frequency: 30 Hz (depending on the test volume) Optional: Media & ambient temperature control, burst pressure & leak testing Test curve: Sine wave, trapezoidal curve, or needle pulse Test medium: Hydraulic oil, gasoline...

...The assembly and testing system is designed as a rotary indexing machine. The rotary table is equipped with 6 stations that are manually loaded by the operator. The basic structure of this machine is self-supporting and consists of ground steel base plates with six galvanized support legs made of square steel tubing, along with a leveling device. The station setups are equipped with variable fastening, ensuring easy changeovers and adjustments. Possible products of the rotary indexing assembly machine include, for example, dashboard connectors, check valves, or plastic pulleys.

...Mechatronic integrated devices or molded interconnect devices (injection-molded circuit carriers) are spatial electronic assemblies – so-called 3D-MID. A special process is used to apply metallic conductor tracks to a specific substrate material (often plastic), thus creating three-dimensional assemblies that also serve as circuit carriers. These spatial electronic assemblies are manufactured...

... machine, automatic lathe machine, conventional lathe machine, milling machine, drilling machine, EDM, wire-cutting machine, CNC bending machine etc. Service project: To provide production design, production and technical service, mould development and processing, etc. Testing machine: Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester...

...Permanent connection - we check in advance with our in-house sealing machine whether the plastic used for the blister cover is compatible with the lacquer used.

...The HandyStar Energy can be used for a variety of applications. It is ideally suited for manual workstations or as an entry-level device, solving your ultrasonic application needs. Typically, these include spot welding, riveting, flanging, and cutting. The HandyStar Energy is designed for simplicity and cost-effectiveness. This makes it meet the requirements for manual workstations. Additionally, it is the ideal device for testing laboratories. Peak power: 600 W Continuous power: 375 W...

...Possibility of use both in the barracks and in operational missions. Construction: - tubular steel; - arms support in plastic material. Completely disassembled and self-transporting. Weight: 25,00 kg Height of the tubular steel: variable from 600 mm to 900 mm. weight :25,00 kg construction:tubular steel construction:arms support in plastic material...

... facility in Germany and is ideally coordinated. Advantages at a glance: - Perfectly suitable for tensile, compression, bending, and component testing on various materials - Force range: 500 N to 5 kN - Requires minimal space - Ergonomic and fast testing - Testing machine can be operated either standing or lying down Testing type: Tensile test, compression test, bending test, component testing Material: Plastic, metal, wire, textile, paper, medical products, pharmaceutical products Force range: 500 N to 5 kN...

...QUASAR testing machines are designed for standard tests and complex applications. Typically, they are used as tensile, compression, and bending testing machines: * Tensile test - Metal (ISO 6892-1 A + B), Plastic (ISO 527), Rubber (DIN 53504) * Compression test - Metal (DIN 50106), Component testing, Assemblies, Components * Bending test - Metal (DIN EN ISO 7438), Plastic (ISO 178) * Cyclic...

... interference fringe pattern. In addition to lapped or finely ground parts, polished parts can also be measured. The parts can be made from a variety of materials: - Metal (steel, aluminum, bronze, copper, etc.) - Ceramic (AL2O3, SiC, SiN, etc.) - Plastic - etc. The interferometers can be set up in the production area near the machining machine. The absolute accuracy is up to 0.1 µm across the entire measurement field.

...Hand lever presses are suitable for simple testing and pressing of plastic or rubber, or for compacting or testing of adhesives, as well as for simple embossing tasks. Hand lever presses are variable in terms of pressing force, manually adjustable via a hand lever, with a pressing force of up to 95 kN. Compact machine with a usable working area of 150 x 150 mm. Direct display of pressing force...

...The electronic load application and the load range from 9.8 N to 2450 N (1 kg to 250 kg) covers all Rockwell applications with a single device. It is also possible to conduct tests on plastic and carbon, as well as in-depth Vickers and Brinell tests. This flexibility, combined with great ease of use, makes the DuraJet G5 the ideal machine where multiple devices were previously needed for different configurations. Electronic load application: network connection...

...Our DN200 thermoforming machine is known for its very compact footprint and budget-friendly price. Its simplicity and compactness make it ideal for small productions and product testing of up to 5,400 pots/hour or 10,800 portions/hour. Our equipment is designed to perform all operations at ground level. FFS packaging is delivered in plastic rolls and thermoformed at your facility. The pots are...

...Universal Testing Machine is a representative test equipment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc. - Frame Load Capacity (Max.) : 5kN - Main Load Cell : 5kN - Load Range : 50 (kgf) ◀(Up to 4-step conversion) - Column Type : Single Column - Load Accurancy : Less than ±0.5...

...The test bar milling machine enables bar-shaped plastic samples to be produced for tension, pressure, bending and flexural impact tests in accordance with a wide range of standards. According to ISO 6259 , ASTM D 638 , ASTM D 1822 , ISO 16770 , 3 axis desktop CNC, cutting tensile samples from plastics, computer controlled, G-codes for samples according to customer request...

...Bakelite is a material made from pure cellulose paper and phenolic resins. It has high mechanical characteristics and discrete dielectric characteristics. Bakelite is a rigid thermosetting plastic that is highly heat resistant. Easily workable by machine tools, can be sheared up to a thickness of mm. 1.5 after heating to 100-110 ° C. Processing materials,sheet,mainly used in TCT, insulation...

...Testing and measuring devices are used for verification during and after the production process, making them an integral part of quality assurance. They serve two purposes: ensuring that the workpiece meets the specified requirements and that necessary tolerances are maintained, and also ensuring that the production machine is operating correctly, thus preventing any expected failures. The...

...we use the Haitian Mars III 200T press to provide a comprehensive testing service to our clients. With this machine, we can ensure that the molds are perfectly suited to production needs, thus ensuring a smooth transition to mass manufacturing. By choosing our service, you benefit from technical expertise and advanced technology that optimize your production process.

...The machine serves as an aid for cutting workpieces made of wood, metal, plastic, or similar materials.

... Values: Ball speed, accuracy <1 % Dimensions of the testing device (3385 x 2855 x 1408) mm (WxHxD) Connection Media 230 VAC, 50/60Hz Dry compressed air, 5bar Optional Accessories Casting device for DIN-compliant ice balls Freezing device for ice balls Compressed air supply Laser targeting device Manual positioning or with electric positioning system...

...Continuous surface inspection for all kind of products ZUMBACH's all-new SIMAC 40/70 is fulfilling today’s needs for in-line surface inspection of extruded products like pipes, cables and hoses with the consistent implementation of machine vision and machine learning. Defect detection The SIMAC detects anomalies and material defects that are difficult to detect, such as compounds that...

... at a standstill, eliminating the risk of injury Extremely handy and versatile Large, clear scales, adjustable Shortest payback period due to savings on time-consuming adjustment procedures Recommended by BG-Wood Technical Data Measuring range: 0-50 mm / Option Inch Reading accuracy: 0.2 mm Housing: Plastic Mechanics: Metal...

...Our Hungarian company expanded its service portfolio in the early 2000s with CNC processing. We acquired our first CNC machine in 2003, which has since been operating alongside 12 other machines in a CNC production hall spanning over 600 square meters. The components produced with these machines are taken by our specialists to the testing laboratory within the hall, where they use advanced 3D...

...Feel free to be demanding with us! We would love to have your challenges: Whether it's shock freezers, fermentation or testing chambers, spiral freezers, or custom machine cladding – we develop the optimal solution for you, for every application area and every industry. The equipment is tailored entirely to your requirements and wishes. A wide range of equipment options is available, such as...

...MA micro automation developed a highly flexible production system for the manufacturing of Point-of-Care (POC) rapid tests in the field of near-patient laboratory diagnostics. It is variable in use for the production of different products and can be configured multiple times. The development encompassed the entire process chain, from plastic molding to testing and packaging. With one system, over...

...DOTS and DOTSC are cost-effective tray-sealing machines ideal for market testing new products, low-volume production, or hot/cold ready-to-eat food delivery. The DOT series machines are designed to use both flexible top film with plastic tray (DOTSC) and laminated paper caps with laminated paper tray (DOTS). They are easy to use, carry, and operate without any complications. With its compact...

...BORRIES built-in impact units are suitable amongst others for marking applications on transfer lines, rotary tables or testing stations. Because of the big usable stroke workpieces with different heights can be marked without any adjusting. BM 12 PN:impact power up to 4 kN BM 22 PN / BM 25 PN:impact power up to 18 kN BM 21 PN / BM 21 HY:impact power up to 25 kN BM 35 PN / BM 35 HY:impact power up to 50 kN...

... from improved performance, optimized functions, and minimized production downtime and machine wear. Additional benefits are provided by functions for leak testing, inspection for hairline cracks, or disinfection of systems.

...Customers appreciate our support in: 3D measurement technology, calibration of testing equipment, and assembly. Our measurement/calibration laboratory offers industrial measurement technology such as: Initial sample measurements Tool measurements Series measurements Prototype measurements Machine capability testing Process capability testing 3D target-actual...