pneumatic hose

...Marks cables 10 to 220 mm in diameter. Marking by means of engraved, concave marking wheels matching the cable diameter. Marking wheels mounted on toe bearings on two horizontally and vertically adjustable swivel arms. The embossing pressure is adjustable by means of a pneumatic device with fine pressure regulator. Hose connection for marking wheel-cooling system that prevents hot insulation...

... machine - Ref. 141-G It does not require a clamp. - Body made of crupo-aluminum - Strap 19 x 0.6 mm - Net weight 4 Kg OPTIONS: - Gasoline engine air compressor 3 HP - 6 bars with air supply hose - Ref. CA-1 - Electro-galvanized steel strap 32 x 0.8 mm (1 m. / Strap) High-strength steel 1100 N/mm² (rolls of 250 m) = 50 Kg - Ref. 142 F - Strapping loops, electro-galvanized steel - Ref. 142 B - Reel...

... frame loading system - Automated extractor for 96 frames - Double output conveyor (Pneumatic version + approximately €4000) - Level regulator (centralizing tank) - DN50 rotor pump - 5 m of high-quality pressure and suction hose - Supers evacuation rail WARNING: item available only ON ORDER - INDICATIVE PRICE...

...Operating temperature range: -20 to +50 °C Hysteresis: 0.1% Medium: Air, all non-aggressive gases Output signals and supply voltages: IDS 2-010: 0-10 V RL >= 2 kΩ 24 VDC/AC +/-10% IDS 2-420: 4-20 mA RB <= 400 Ω 15-30 VDC Connections: Electrical: Screw terminals for 0.14-1.5 mm² Pneumatic: 2 connections for hose with 6 mm or 4 mm inner diameter Cable gland: PG7 Connection assignment IDS 2-010: Terminal block: 1 : + 24 VDC/AC 2 : Output 0 – 10 V 3 : GND Connection assignment IDS 2-420: Terminal block: 1 : + 24 VDC * 2 : output 4-20 mA *...

... pneumatic drive for connecting a pneumatic brush and an air gun, as well as a flexible hose for supplying water under pressure. Basket diameter :Min 700 mm, Max 1400 mm Washing space height:Min. 400 mm, Max 780 mm Capacity (maximum):400 kg...

... operation Pressure reducer with manometer for compressor pressure, tank pressure, working pressure, and differential pressure Water separator with drain valve Dead man's switch pneumatic, double Thompson (pneumatic) precision blasting medium dosing valve Main air valve pneumatic Venting valve pneumatic with silencer Screen and lid Automatic water shut-off valve Water connection for wet blasting work 10 m hose package ¾" (19x7 mm), consisting of blasting hose, control hose 3. Signal - control High-pressure water hose, dead man's switch, and couplings...

... special oil-free mechanics - Maximum health protection through low vibration transfer to the joints. - Stepless power adjustment - Four different carbide chisel inserts available as options - Optimal, secure grip and high working comfort due to ergonomic design Scope of delivery - Finishing chisel - Wide flat chisel for Pillo - Connection hose (2 m) - Connection filter set - Item No.: 50224000...

...The MAUS® Cold Binder Spray Machine Type 50 / 50-00 is suitable for processing all sprayable binders such as adhesive, primer materials, roof coatings, bonding bridges, or similar materials. Steel tube chassis with holder for hose and spray rod. Drum holder. 1-piston vacuum pump. Steel sheet wheels with pneumatic tires. With this device or the pump, the binder can be effortlessly pumped from a 200 l drum into the small 50 l drum. Length: 950 mm Width: 550 mm Height: 1150 mm Net weight (without drum): 30 kg...

...In pneumatics, mechanical power transmissions are carried out in closed systems using compressed air. The compressed air generated by a compressor must be distributed and processed before it can perform the desired application. Classic pneumatic components include pneumatic cylinders, pneumatic valves, maintenance units, and hose and pipe systems. Typical applications can be found in automation technology, control technology, and positioning technology.

... pressure sensor - Triple stage water filtration (300-10-5 μm) - Electro-pneumatic panel with emergency button - Max pressure safety with calibrated rupture disc - Ultra high pressure gauge 4000 bar series - Ultra high pressure by-pass with remote pneumatic control - Ultra-rotating manual gun with 4 jet head - High pressure hose set total length 10 m...

...-control of the rotary actuator - Silencers, throttle silencers, and throttle plates for sound reduction and throttling of opening and closing times - Limit switch boxes in a wide variety for position feedback to the control system - Pneumatic and electropneumatic position transmitters for continuous control and feedback of the rotary angle - Hose fittings of all kinds...

... by connecting it directly to the extractor. – In fact, the motor head features two connections – one electric and one pneumatic – suitable for the direct operation of the tool. You can forget about the various electrical cables or compressed air hoses scattered around your laboratory. In fact, the type of electro-conductive suction hose already integrates the compressed air hose. – Durability...

... vessel (1 - 3 Tank System) have a volume of 2 kg and provided with a closure cap. In all systems, a pressure reducing valve and a pressure gauge for setting a constant jet pressure, and compressed air supply are fitted with plug-in nipple. All systems are equipped with a pneumatic foot switch for turning on and displaying the blasting process. Material:steel, plastic Surface:powder coating...

...Adchem offers a wide range of cartridge guns. This includes products from Sulzer Mixpac AG, Cox Dispensers, and MK Guns. At Adchem, you will find the right cartridge gun for all adhesive/sealant applications. For processing single-component adhesives/sealants, for example, the 600ml hose cartridge press or the 310ml silicone gun is available in various versions. Do you need an affordable adhesive gun or a device with high extrusion force? For your application, various models are available, from manual cartridge presses and pneumatic cartridge guns to professional cordless adhesive guns.

... operated separately via an additional switch if needed. Technical Data: Setting stroke up to 10 mm Operating pressure 6.0 bar Air consumption 5.7 l free air / cycle at 5.5 bar Hose length 3,000 mm Working range: blind rivet nuts M3 to M10 Various riveting equipment can be supplied optionally upon request.

...There are compressors of all sizes and styles. If you need to use a lot of pneumatic tools as part of your work, you can't do without a compressor, especially a model with a large tank. However, if you are not a professional or only need a model with a more modest tank, then this digital compressor from HBM is the one for you. Compact, you can easily connect it to its 3-meter hose to inflate your...

...Pneumatic hose spreader with a two-chamber system for simultaneous application of coarse legumes and fine seeds over a working width of up to 6 m. The VENTO® Duo is a pneumatic 12-volt hose spreader with a two-chamber system designed for the simultaneous application of two types of seeds at different placement locations or soil depths. For example, in a single operation, coarse legumes can be...

...Advantages • Absolutely dust-free operation due to double wall design and inflation clamp • Safe handling of the inflation hose through pneumatic control • Pneumatic lifting and lowering • Round, stable construction - no material residues in corners and edges...

...STAUFF Clamps for Hose and Pipe Mounting STAUFF clamps for pipe and hose mounting for industrial, mobile, and marine hydraulics, industrial piping construction, mining, power plant and reactor construction, compressed air technology, measurement and control technology.

We supply hose products and ready-made hose assemblies. With us, you can find hose fittings and hose couplings for a variety of applications. We offer you industrial...

Manufacturing of flexible hoses, armored hoses, or heating hoses, and distribution of inlet hoses and outlet hoses...

...PVC Slurry Drag Hose PVC suction and pressure hose for light applications to convey water for agriculture and industry. Specifically designed as a drag hose for slurry distribution. Super flexible and cold-resistant quality. Resistant to many chemicals, UV, and weatherproof.

...We are a certified Parker dealer and offer you the complete range of Parker products: Parker Fluid Connectors – Ermeto, among others. Parker Hydraulics - Olaer, among others. Parker Pneumatics – Origa, Legris, Rectus, among others. Parker Filtration - Parfit, among others. Parker Store – Fittings, hose on-site service, among others. Parker Tracking System...

...Pneumatically operated hydraulic unit up to 700 bar with ATEX certification. For driving two-hose hydraulic tools from any manufacturer. MADE IN GERMANY Pneumatically operated hydraulic unit up to 700 bar with ATEX certification. For driving two-hose hydraulic tools from any manufacturer. If you have any questions, please feel free to contact us at any time. ATEX Certification: EX || 2G c k ||B T4 / || 2D c k |||C 135°C / T amb: 5°C - 40°C MADE IN GERMANY Maximum pressure: 700 bar ATEX Classification: EX || 2G c k ||B T4 / || 2D c k |||C 135°C / T amb: 5°C - 40°C...

...Hose reel with hydraulic drive for pressure hoses with Storz couplings...

...For applications in construction machinery and forklifts (hydrostatic drive). Construction: • Synthetic NBR • Rubber hose, 4 wire windings • For high tensile strength • Coating made of CR synthetic rubber Application: • High-pressure hydraulic systems for petroleum and lubricants • For applications in construction machinery and forklifts (hydrostatic drive) • Exceeds DIN EN856/4SP performance requirements • Qualified for a minimum of 500,000 impulse cycles. Operating temperature: -40°C to +100°C (-40°F to +212°F)...

...Universal hose for diesel, oils...

...{"516 655":"Water Hose","519 947":"Disc","516 935":"Bracket","005 217 08":"Seal","513 643":"Flange Coupling","006 515 48":"Adapter","509 221":"Exhaust Pipe","513 447":"Bracket","516 170":"Panel","006 189 09":"Front Centralizer","006 189 08":"Steel Support","513 565":"Pneumatic Controls","513 443":"Plate","006 188 88":"Cover","006 490 58":"Wear Piece","516 890":"Hydraulic Heater","005 438 08...

... * Automatic miter adjustment * Includes 2 pneumatic clamping cylinders * Saw blade feed infinitely adjustable * Two-hand safety control * Adjustable material stop (rear) * Dust extraction system * Mist spraying device for air-oil cooling * Air gun with spiral hose * Includes maintenance unit with pressure reducer * Ergonomically arranged control panel * Max cutting height 148 mm * Saw blade 450...

... turbo dry system. WE CAN CUSTOMIZE IT UPON REQUEST. The teat is made of rubber. The hose is transparent and original, TSE CE approved. Motor power is 0.85 Hp at 1425 rpm. MOTOR POWER INCREASES DEPENDING ON THE PRODUCT. The pulsator is a 40/60 cc pneumatic pulsator. There is 1 pulsator. The switch is 16 Amper, automatic, and grounded. Our warranty service is available for 24 months. We guarantee the availability of spare parts from our company for 10 years.