safety valve

...HP- 40 bar air receiver options Standard (horizontal on the base-frame or vertical ) the HP- 40 bar air receiver is hot galvanised with accessories, including safety valve and Bekomat drain system. Depending on the location and country, the air receivers have to comply with the local codes and certifications. All Codes and certifications are available : CE-PED, ASME VIII, CRN for Canadia , TR CU...

... support is completely airtight, protecting the motor from any infiltration of grease or meat juices. Mounted on ball bearings, it does not bear the weight of the meat nor the jolts from the user, thus protected from any twisting. Easy maintenance: Drip tray stamped, equipped with a perforated grid and removable recovery drawer. High-pressure infrared radiants, regulated by a valve, safety thermocouples...

... adjustable and adjustable water-air hydromassage jets (depending on the size and geometry of the tub) Electric pump, 700W - Italian production Sorb 3F with anti-cavitation safety valve 12 air jets with lateral diffusion, placed on the bottom of the tub; Blower (blower) 700W - Italian production Minimum water level sensor in the bathtub (electric pump and underwater halogen protection)...

...Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a pressure regulator with bleed screw and a safety pressure relief valve. A float switch is fitted to regulate the fill level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre reservoir and poppet valve...

...Checking and adjusting: function, closing pressure, flow pressure, overflow quantity, - Stationary testing facility for checking and adjusting: overall function of the gas pressure regulating device (GDR), test pressure and pre-pressure, closing pressure, flow pressure, overflow quantity, function of the safety shut-off valve (SAV), SAV zero closure test...

... 1,733 mm Internal dimensions of the tank: 2,120 x 1,445 x 1,523 mm Usable dimensions of the working basket: 2,070 x 1,290 x 1,215 mm Counter height: 1,733 mm Tank capacity: 4,665 L Ultrasonic generator power: 16,000 W Heating resistance: 36 kW Power supply voltage: 230 - 400 V Lid: Manual Drain valve: 2 1/2"...

... breweries a flexible solution for improving the taste of their beers. Features: - Easy filling of the cylinder with hops for dry hopping. - Safety valve (1.5 bar) for reliable operation. - Attachment to the tap head of the KEG barrel for easy handling. - Pressure valve for controlled flow of the beer. - Carbon dioxide check valve for safe operation. - Removal of the CO2 and beer check valves in the tap head required. - Safety-related measures without liability from WERK II GmbH.

... is desirable is a potential application for a PTFE coating. Practical examples - Scraping knife - Baking sheets - Containers - Mandrels - Colour mixers - Pastry form rollers - Tapered valve plugs - Cookie cutting rollers - Guide plates - Glue dispensers - Press plates - Pump pistons - Tyre moulds - Screw conveyors - Dough processing tooling - Funnels - Drying drums - Packaging equipment...

...Factory new triplex pump, Triplex 140 model Max flow rate 140 lt / 1 ' Pressure up to 50 bar Drive by hydraulic motor Accessories safety valve pressure gauge with pressure gauge suction pipe Producer:Project Template:Triplex 140 Condition:New...

...We offer a complete range of high vacuum equipment for dust extraction generated by power tools. This model has been designed, manufactured, and adapted for the extraction of dust produced during dry sanding of primer and filler layers. The container is emptied manually. The container can hold one bag. Main features: - The filter cleaning is done through automatic de-dusting. - Can be equipped with an explosion vent compliant with VDI3673 standards. - Equipped with a safety valve (compensation flap) on the filtering unit directly. Brand: Aspirelec...

... possible when it is depressurized. A mechanical venting valve is integrated into the container lid. The hassle-free filling of the liquid is ensured by a generously sized safety filling opening. Technical Data: Suitable for a variety of liquids - Fluid group 1 Max. 6 bar container overpressure permissible Standard design 1 bar (safety valve) Valve voltage 24 VDC, 230 VAC available on request Valves with manual auxiliary operation Seal materials are versatile and resistant Permissible...

...Waste oil collection/extractor-75 l Venturi-mobile specification Compressed air is pumped into the container via the Venturi block a vacuum is created Manometer/vacuum meter for displaying pressure and negative pressure Oil is extracted via the dipstick opening Level indicator Safety pressure relief valve permanently set to 0.5 bar, with throttle valve Plug nipple for Rectus coupling, type 26, NW...

...Alpeco is the UK distributor of OCV control valves. These valves can be found in Waterworks, Fire Protection, Irrigation, Industrial, Petroleum and Aviation fueling in nearly every country throughout the world. The range of models available is extensive and includes pump control valves, pressure relief and safety valves, high level shut-off valves and flow control valves. ...

... pressures of 220 barg / 3190 psig. It comes standard with a needle valve to allow for precise flow rate adjustment. The DK37 is equipped with vertical or horizontal process connections, offering options for NPT, G-thread, flange adapters, and many other connection options. It is certified for use in explosive atmosphere zones and is suitable for use in safety instrumented systems (SIS). Fluid::for...

... Each valve is equipped with a dry contact that allows for control (e.g., power cut, machine stop, ventilation...). You can discuss with us and create a quote together to find the best solution for your safety.

...The direct-acting 2/2-way solenoid valve GEMÜ 102 features a fully plastic-coated drive magnet. The sealing to the magnetic armature is achieved through a PTFE bellows and an additional safety membrane. The valve body is available in various materials and as either a straight or angled body. • Good cleanability • Hermetic separation between medium and drive • Magnetic drive can be replaced...

... weatherproof and UV-resistant. The break-away system prevents damage when the vehicle moves while the dispensing valve is still in the tank nozzle, thus ensuring high operational safety. The system is designed so that the end piece easily detaches from the dispensing valve in such a situation. Furthermore, the functionality of the dispensing valve can be easily restored by replacing the end piece.

...The BOV system (bag on valve) combines a hygienically pure aluminum bag with a sealed valve in a pressurized spray can. The barrier properties of the three- and four-layer POLIALUVEL® composite films provide protection against the penetration of light, oxygen, and water vapor. They meet the highest hygiene standards and a high safety standard to protect chemical and aggressive filling goods. The composite films are suitable for both thin and thick liquid filling goods.

... standards in terms of lifespan and reliability. Application Area - As a shut-off in municipal underground PE-HD gas supply lines for natural gas according to DVGW G260 Advantages - Low operating torque - With internal spindle thread - Safety through absolute tightness - Robust design - Metallic sealing system with long lifespan - Any flow direction - Piggable Nominal Diameter: DN 50 - 300 Nominal Pressure: PN 6 /16 Operating Temperature: -10°C to +70°C Media: gaseous...

... body - Integrated optical position indicator and standard closing limit - Optional with electrical position feedback and/or lockable handwheel safety Type: Diaphragm Actuation: Pneumatically controlled Function: Control Body: Threaded, double, PTFE, EPDM, plastic, PP, NBR Number of ways: 2/2-way Additional features: compact, standard, DIN, normally closed, normally open, integral...

...Respiratory masks "Made in Europe", FFP3 without valve NO Far East goods! CE marking / 4-digit test center number EN 149:2001+A1:2009 / EU Regulation 2016/425 Highest protection against external and self-harm...

...After the puncture, the cannula is withdrawn and the safety mechanism is automatically activated. The cannula then locks irreversibly, both felt and heard, into the cannula protection. • Catheter material made of polyurethane becomes soft intravenously, thereby reducing mechanically induced vein irritations • High kink resistance • High X-ray contrast capability • Stainless steel cannula with back bevel for minimal puncture trauma • Injection valve with flap closure • Removable BD LuerLock closure cap • Wide, moldable fixation wings for secure and gentle fixation • PVC and latex-free...

...Explosion proof safety valve to protect inbreathing openings of storage tanks, vessels and pipes to prevent inordinate vacuum. Approved for flammable liquids of explosion group IIB3 with a maximum experimental safe gap (MESG) ≥ 0.65 mm and a Maximum operating temperature of 60 °C.

...Our installation systems with integrated safety control block are suitable for installation in pressurized lines. The integrated safety control block consists of a volume flow reduction unit and a pressure reducing valve. These two components make this system become a cost-effective, very safe, and technically fast operating solution. The mounting to existing systems and machines can be completed in just a few minutes, because there are only 2 connections and mounting material is also part of the system.

...The FFP3 protective respirator effectively filters and blocks up to 98% of 0.3 micron particles. Filtration capacity up to 30 x CMA (Maximum allowable concentration). Multiple layers for increased airway protection. Auxiliary air expiration valve. Fixing the mask comfortably on the face, with polyurethane foam cushions inside SKU:MSC-FFP3V-X1...

...5-layer polypropylene non-woven mask, pack of 10 pieces 5-layer polypropylene non-woven mask | Bendable nose clip made of polypropylene with iron wire inside | Color: White | Without valve | With textile ear loops | Latex-free | Personal protective equipment Category III according to PPE Regulation (EU) 2016/425 | Standards: EN 149:2001+A1:2009, EN 132:1999, EN 134:1998, EN 143-2006, EN 13274-7:2019, ISO 6941:1995 | Non-sterile | For single use...

...CE certified, YES, 4-digit test number by Notified Body (NANDO list) Standard EN 149:2001+A1:2009 Description: without valve • ear loops • adjustable nose clip • high wearing comfort • good fit and sealing...

...Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm...

...The Hartmann Twin Ball Valve (TBV) provides a double line barrier and enables a significant increase of safety without much effort. Designed for applications with especially high safety requirements, the TBV consists of two integrated ball valves, which can be equipped with two independent barriers each. Thereby the safety can be raised by factor 4 compared to a standard valve. With the Double...

... - Extremely stable and compact version - Comfortable handles - With stickers featuring hazard symbols and safety instructions - Containers made of galvanized steel, yellow epoxy coating (RAL 1003) Application: transport External width: 170 mm External depth: 340 mm External height: 470 mm Volume: 20 l Material: steel Color: yellow Approval: UN Validation description / certificate 1: 3A1/X/250/... Weight: 3.8 kg DENIOS warranty: 2 years...