electronic production

...We offer laser direct structuring (LPKF-LDS process) for the production of 3D-MID (so-called three-dimensional circuit carriers) as a service in Magdeburg. 3D-MID stands for Mechatronic Integrated Device (or Molded Interconnected Devices). The MID technology makes it possible to use three-dimensional plastic parts as circuit carriers for electronic or mechatronic assemblies. The LPKF-LDS process...

...electronic rooms, and control cabinets to ensure safe and optimal working conditions. Additionally, our filtration systems secure oxygen supply and reduce dust levels in the conditioned space. The globally tested units are available in various installation configurations and performance levels. Application Area > Optimal climate control for crane cabins (Cooling, Heating, and Dehumidifying) for...

... products. 10 inch 7 inch or 4.3 inch hmi screens are used. Control is provided by PLC system. Working voltage is 220 volts 50 Hz. is Control voltage is 24 volts. It fills 800-2500 units on average. Boilers between 100-150 liters are used in the systems. Depending on the system, the collector system can also be used. Electronic float system is applied in the boilers. Conveyor system is used between 1-3 meters upon request. Conveyor systems are made of polycarbonate, water-resistant, chemical-resistant raw material suitable for food products.

... use thanks to the lever located under the lower plate that allows for thickness adjustment by modifying its height. Control panel with: 1 main ON/OFF switch 2 electronic thermostats, 1 for each plate 1 timer for contact time adjustment 1 "START" button. 1 emergency stop of the "Push Button" type. Specifically designed for large pizza or tart production, 400 pcs/hour. Stainless steel chassis. Device...

...In the production of electronic components and semiconductors, potential electrostatic discharges during assembly can affect the proper functioning of the parts being assembled, or even destroy them. Special ESD workstations prevent this through the appropriate anti-static equipment. Lifting columns for adjusting the height of workstations have so far hindered the safe dissipation of...

... diameter. Our types E80, V75, C70 and P82 are made of specially selected and dynamically tough materials. In addition, type E80 also is antistatic to a limited extent and has a resistance value of about 106 Ohm; thus, it is excellent for use in electronic devices and chip production. Available diameters: 1.8mm - 7mm Available lengths: 40mm – 1,610mm Temperature resistance: -20°C - +160°C Coefficient of friction: 0.35µ - 0.9µ* Maximum tension: >100N...

... production requirements. The standard equipment includes connections with hose connection, with the possibility of customising the connections with solutions such as DIN, GAS, TRI-CLAMP and FLANGED CONNECTIONS, thus responding to specific installation requests. With its self-priming capacity, reversibility and ease of maintenance, the 'RAPID VER' Series emerges as the ideal solution for handling dense and viscous products, ensuring efficient, reliable transfer that meets the highest standards of quality and hygiene.

...MITA offers various configurations of air- or water-cooled industrial chillers: all equipped with an electronic microprocessor for setting and visualizing the outlet temperatures of the fluid, and all suitable for Industry 4.0. Some advantages of chillers for industrial processes: Standalone, air-cooled unit. - Maximum reliability and performance proven through rigorous internal testing. - Adaptability and flexibility. - Energy savings of up to 80% in versions with free cooling.

...The punctual measuring infrared thermometers are especially suited for precise controlling of industrial production processes, in the research and development and for controlling the function of various devices and plants. Name:Infrared temperature measuring device Temperature measuring range:-50...+975 °C Environmental conditions:-20...+180 °C; Electronic: 0...+85 °C; 10...95 % RH Distance Spot...

...The AW 100 is a high-speed universal machine with a modern design for wires up to 1.2 mm in diameter. With a wide range of accessories, it is suitable for both efficient small series production and the repair of small motors. It is easy to operate and can be converted with minimal effort. The electronic speed control allows for optimal adjustment of the speed to the wire diameter and working conditions. A PLC takes over the control and counting during the winding process.

... programs Mechanical regulation 2 MPa/ 5 MPa/ 10.0MPa/ 17.5 MPa Electronic regulation 4 MPa Flow units (sccm, mm3/s, cm3/s, cm3/min, cm3/h…) Desensitized Test and others, depending on your applications Weight :7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C...

.../transport For the manufacturing of panels and sub-units of electronic controls, Electroalfa uses products made by well-known brands, such as SIEMENS, EATON, Schneider Electric, ABB, Danfoss, Rockwell Automation.

... and detail even on curved or complex surfaces. - High engraving speed, suitable for mass production needs. - Easy integration into automated production lines or industrial marking systems. The MOPA engraver is the ideal choice for those seeking precise, durable, and high-quality color engraving on metals like stainless steel and aluminum. Perfect for customizing and decorating industrial...

...Sensitive electrical or electronic equipment, components and devices (ESD sensitive elements) may be damaged or destroyed by electrostatic discharges (ESD) in the immediate vicinity. Electrostatic discharges can come from people or through handling ESD sensitive components (e.g. during production, assembly, transport, storage etc). Electrically conductive products which conform to DIN EN 61340-5...

... high efficiency. For your production, the use of Hastamat dosing units means maximum investment and operational safety while ensuring gentle handling of the product and high output performance. Electronic monitoring: ✔ High dosing accuracy: ✔ High flexibility: ✔ Quick-change format parts: ✔...

...We plan, build and deliver turnkey test systems for electronic and mechanical components. For example, these are test benches for quality assurance, validation and production departments of companies in various industries. Our services include e.g.: - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software...

... serial and serial production. At given need our experts can invoke extensive subcontracting. Construct by using 3D CAD design system SOLIDWORKS We are glad and proud of having longtime customers in construction, provision of telecommunications services, furniture manufacturing, shipbuilding companies, electronic components, non-standard equipment manufacturers sectors. Working with Lithuanian and foreign markets. More than a half of our production is exported to Denmark, Finland, Sweden, Norway and Germany. Also we are cherishing longtime partnership traditions with customers from Lithuania...

... control and regulation technology. It can be supplemented with additional options. The precise production of individual components, the exact tuning of the UV system, and the harmonious integration into the production process reflect our commitment to quality. In conventional drying, moisture is removed by warm air or infrared radiation. The printed layer is reduced. UV drying is a chemical process triggered by UV light (polymerization). The printed layer thickness remains unchanged.

... lever on the bundle enables the bending arm to be re-opened and at the same time the LQTE-Y-DG binding cycle commences. In this setup the system keeps production times to a minimum, which are approximately 23 seconds. The electrical, electronic and hydraulic components used to construct the machines come from leading international manufacturers.

...As a system partner for the electronics industry, W. Kolb Fertigungstechnik GmbH offers not only the manufacturing of electronic assemblies but also many other production services. These include, among others: - Testing and inspection of assemblies - Coating and potting of assemblies - Laser marking of assemblies - Climate simulation for components and assemblies - Cleaning of assemblies - Assembly of assemblies and end devices...

...Through manufacturer-independent procurement of electronic components and devices, we ensure the supply chain and production for our customers. Whether semiconductors, integrated circuits, or electromechanical parts.

...Measuring, controlling, and regulating various process variables with state-of-the-art systems is a broad and intricate field in today's automation and production technology. We have the expertise to develop and manufacture electronic control, measurement, and regulation systems. Starting from mechanics to analog and digital electronics, software-implemented control and regulation algorithms, all the way to modern graphical user interfaces with touch-screen technology. We have already demonstrated this in numerous development projects.

...The SSL Series Electronic Loads 32EL... are high-precision DC sinks designed for use in research, development, production, service, and training.

...The TurbSense® turbidity meter represents a substantial improvement in turbidity measurement technologies. The system automatically adjusts the light so that turbidity can be measured independently of background light and electronic drift. The sensor measures in the range from 0.01 NTU to 1,000 NTU with a resolution of 0.001 NTU in the 0-10 NTU range. Additionally, the TurbSense® turbidimeter...

...SAET designs and produces electronic solutions tailored to the customer, optimizing performance and costs.

...At Troll System, we do not provide customers with a catalog of standard, pre-packaged electronic boards; instead, we offer the design of customized electronic boards tailored to the actual needs of the customer. The creation of an electronic board involves a complex and meticulous process, which the Troll System team follows step by step from start to finish. At Troll System, everything is internalized – from design to production and even after-sales service – to ensure our customers receive a high-quality product that is monitored by our team in every single detail.

... can assemble under cleanroom conditions, assemble only individual components, or prepare the device for final assembly at your location. In device assembly, we can work with methods such as press-fitting or secure components, for example, by gluing. Your advantages with A+B Electronic - Device assembly according to your requirements - We are not just service providers, but technology partners: A+B Electronic thinks through your project, and together we successfully bring it to series production.

...VIDEO CREATION: Design and development of corporate presentations on DVD-Rom / Design of video catalogs, samples, and multimedia price lists / Production of institutional, editorial, and product videos / Multimedia touch screen totems with customized graphics and interactive menus. DVD AUTHORING: Production of interactive media for structured trade fair setups / Industrial duplication with glass...

...NanoHybrid provides a large degree of versatility. The active alignment, test and assembly station combines various assembly methods including gluing, laser welding or selective laser soldering. In addition, the station offers opto-electronic testing capability. Therefore, NanoHybrid is ideally suited for the development and small serial production in manufacturing companies or in research institutes. In such a product development area, an active alignment station needs to cope with opto-electronic and other precision devices with varying sizes and characteristics.

...Suitable for the production of oil, dry, and welding transformers as well as for the manufacture of electric motors. Temperature index 200°C - heat-resistant - IEC 60317-25 Base coating made of modified polyester (imid), top coating made of polyamide imide. High heat-resistant aluminum enamelled wire with very high mechanical and thermal load capacity, combined with excellent chemical resistance. Manufacturing range 1.18 - 5.00 mm in Grade 1 and Grade 2.