air connections

...A single operation makes simultaneous connections for multiple lines that have a variety of different fluids and sizes. A special design minimizes air admixture in fluid lines upon connection. Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.) The MALC type realizes...

... Conditioning Systems / Combi,fan heating connections / Water heaters connections / Floor radiator Connections / Tank connections Nominal Diameter DN:DN15-DN20-DN25 Connection Type :MF (Male x Female), FF (Female x Female...

...High pressure regulator, standard version inlet pressure up to 220 bar (3190 psi), higher pressure for special versions. Inlet connections available for every type of gas. Outlet connection G 1/4 - F. External chrome-plated finish. The regulator is composed of an high pressure stage followed by a lower pressure stage, providing an accurate outlet pressure control starting from 0,1÷0,5 bar range. Outlet pressure is controlled by a diaphragm.

... workpieces and tools. Weight: without suction housing: approx. 9 kg/m; with suction housing: approx. 12 kg/m Air pressure: 5…10 bar, dry, oil-free, filtered Nozzle rotation speed regulated nozzle: approx. 600 min⁻¹ Operating ambient temperature: 0…+80 °C (+32…+176 °F) Product features: Also available as a blow gun, Variable connections, Two different nozzle arrangements Operating ambient temperature: 0...+80°C (+32...+176°F) with blowing air; 0...+60°C (+32...+140°F) without blowing air Storage temperature: 0…+80 °C (+32…+176 °F) Ambient humidity: max. 70% r.H., non-condensing...

...The spring pressure reducer is used for single-stage reduction of compressed air and neutral gases. The adjustment of the set pressure is done via a spring. Series Version Nominal Diameter: DN 6 to DN 100 Nominal Pressure: up to PN 320 bar Operating Temperature: -30 to +80 °C Operating Medium: Compressed air and neutral gases Inlet Pressure: max. 320 bar Installation Position: any Connections: threaded connections Function Test: Pressure reducer (including performance measurement) Materials Housing: 2.0967 Internal Parts: 2.0967 / 2.0958 / 1.4310 Seals: NBR / PA6.6...

... • simultaneously avoid pipe corrosion. • An integrated vapor barrier and self-adhesive connections ensure reliable thermal decoupling. Depending on the load requirements, Walraven recommends combining them with Bifix® G2 clamps without inserts and BIS heavy-duty clamps HD500.

...Whether temporary or permanent, a Portakabin medical laboratory can provide a sterile and climate-controlled environment for conducting tests and research. With a space tailored to your requirements, your modular laboratory can accommodate any pathology. Upon delivery, your Portakabin laboratory is equipped with all the plumbing, data connections, power outlets, and gas connection points you need. The interior layout and furniture can be designed to suit a wide range of specialized services, including hematology, histopathology, chemical pathology, and microbiology.

...Ventilation: 72 m³/h to 2,500 m³/h other ventilation capacities available upon request Pressure levels: 6, 10, 16, and 25 bar standard other pressures available upon request Connections: Threaded or flanged Advantages Different requirements are placed on inlet and outlet valves. They primarily serve to vent during the filling and emptying of pipelines. However, they should also degas under pressure.

...Ceiling Air Evaporator (Air Cooler) ECO MIC 101ED (Successor to MIC100ED) for cabinets and small rectangular cold rooms with differentiated fin spacing of 4.5 / 9 mm for medium/low temperatures up to -35°C, with electric defrosting. Performance at -8°C: 880W. 1 fan: D=230 mm. Fan power: 53 W. Airflow: 460 m3/h. Throw distance: 2.5 m. Defrosting: 800W. Battery connections: 1/2" SAE (inlet), 16 mm (outlet). Condensate drain: 1/2”. Voltage: 230V/1Ph/50Hz. Dimensions: 430 x 650 x 172 mm. Mounting distance: 320 mm. Weight: 8 kg.

... workpieces with suction connections, movable suction arms for suction of welding gases together with mobile filter units, suction hoods, walls and pipelines, industrial vacuum cleaners for cleaning the working environment for feeding or operating filter systems. All products comply with ISO 9001: 2015, ISO 3834-2: 2005, EN 1090-1: 2009 and EN 13084-7: 2012.

... by joints. A rubber insert is used for sealing. The rubber insert is glued into the coupling, and the hose ends are placed centrally into the opened coupling. The coupling is closed with two self-locking clamps. It is adjustable for all hose wall thicknesses in the following hose diameters: di = 100 [mm] di = 130 [mm] di = 150 [mm] di = 200 [mm] di = 250 [mm] Compared to conventional hose connections, the coupling offers the following advantages: It is easy to handle and can be operated by just one person. Diameter: DN250 Country of origin: Austria...

... connections: 100 – 240 VAC/5A, 50/60 Hz, 320 VA Compressed air connection: 6 bar Dimensions (W × H × D): 385 × 510 × 525 mm (16 × 20 × 21 in.) Weight: 37.3 kg (82 lbs.) Interfaces: 2 × I/O, Encoder output, Ethernet...

... 900 x 200 mm Maximum table load: 200 kg Dimensions WxDxH: 2000 x 1500 x 1200 mm Weight: 650 kg Electrical load: 2x 230 VAC, 50 Hz, max. 2.3 kW Possible connections: USB cable and network Climate: 17-23°C, 50-60% Laser class: Laser class 1 Air supply: Air supply unit with software-controlled valve per layer Autofocus: Ultrasonic autofocus Red pointer: Added to the laser beam path Shutdown delay...

... The HTRB spray head comes with a ball socket. This allows it to be mounted flexibly and precisely with the flexible HPM technology brackets. All our spray heads are available individually or as a spray head group. The spray head group includes air and liquid connections (check valve) for the distributor. An optional check valve mounted on the spray head prevents liquid from dripping through the spray head in critical piping situations or positioning.

...Rotary Union without Flange 4 Connections G3/8 Rotary unions for the transfer of media between rotating machine parts. Our standard seals consist of a profile sealing ring made of PTFE with an O-ring as a preloading element, allowing sliding speeds of up to 2 m/s, operating pressures of up to 350 bar, and temperatures of up to +150°C (higher values available upon request). Media: Pressure fluids based on mineral oil, non-flammable pressure fluids, environmentally friendly pressure fluids (bio-oils), water, air, and others depending on the O-ring material.

...Assembly table with an integrated rotating lifting system at the center. Robustly constructed, this assembly table features a rotating lifting system at its center. Technical specifications: - Crossbars fitted with non-slip rubber strips. - Pneumatic cylinders and air distributor with 4 pneumatic connections. - Pneumatic lifting and rotation locking activated by a foot pedal. - 2 large storage shelves. - Adjustable tilt angle and height. - Height adjustable from 850 to 1250 mm. - Width 1200 mm. Available in 2 different lengths: 2000 mm or 3000 mm.

...– self-driving spraying machine for the production of composite layers with bitumen emulsions according to TL BE-StB 15 and adhesives, as well as for the treatment of seams, connections, and edges according to MSNAR. Functions: - Self-filling from external containers with suction lance - Binder circulation during the heating process - Spraying from spray ramp or hand lance - Precisely dosed spraying of the working seam and the coating of the high edge - Cleaning with compressed air by flushing all pipelines, hoses, and the pump...

...Smoke Machine for Leak Testing - Smoke Generator for Leak Detection - Smoke Machine for Flat Roof Sealing Tests Why perform a smoke test? The smoke test allows you to: Locate connection errors, Detect air and odor leaks in pipes, Distinguish potential mixtures of wastewater with rainwater to mitigate the risks of water pollution. Highlight inappropriate connections. The smoke...

...existing buildings, and renovations, as well as for filling or casting. House connections for electricity, gas, water, district heating, communication lines, air conditioning systems. Wall openings, penetrations in building walls. Penetrations or grooves in the aerospace industry, rail vehicles, automotive industry, mechanical engineering, shipbuilding, swimming pool construction, and the...

... for clean and smooth flow of liquids in high-performance engines - Air filters made of cellulose or synthetic material with an accuracy of a few micrometers - Filters for construction machinery, hydraulic filters, high-pressure filters...

...With our special components for building technology, air distribution is even better. We offer: air distribution boxes for supply and exhaust air with built-in flow distribution, control dampers for regulating air volume and reducing noise, round and rectangular connections, as well as integrated air outlet grilles. All components are approved for building technology, and also for shipbuilding...

...Swagelok pressure gauges provide accurate pressure measurements for industrial, ultra-high purity, and biopharmaceutical applications. Available in a variety of pressure ranges, dial sizes, connections, mounting styles, and options. - PGI Series (Industrial and Process Gauges) and PBG Series (Console Builders) - PGU and PGC Series (Ultra-High Purity and Clean Dry Air) - PGN Series (General Applications with ECE R110 Approval)...

... connections). You can find this hand pressure bag here: Hand Pressure Bag. Simultaneously, the bare cut edge of the aluminum profile is sealed. Note! Due to the length of 2.5 m, additional shipping costs of €15 will apply for this product.

... water or antifreeze mixtures. MARSTON Universal Sealant is suitable for sealing engines and housings in the automotive and motorcycle sectors, tractor manufacturing, general industry, and also in the food industry. Features: - NSF, DVGW, and KTW approvals - Permanently plastic, no cracking under extreme stress - Universally suitable for metal and plastic connections - Secure surface sealing - Easy disassembly - Load-bearing after 15 minutes - Unlimited shelf life - Resistant to a variety of liquids - Silicone-free - Isocyanate-free Profile: MARSTON...

...Stainless steel standpipe outlet, rigid U-outlet, AISI316, matte, projection 210mm, total heights 330mm/model MI6300, 230mm/model MI6400, connections 3/8" female or M10x1 female. Stainless steel (AISI316) stand U-outlet, rigid, DN15, air aerator; single pipe supply; Connection 3/8" female or M10x1 female EAN 40 34154 01733 7 Art. No. MI6300 EAN 40 34154 01732 0 Art. No. MI6400...

... x 881 mm (W x D x H) - 2 extraction points for welding, machining, grinding - Conductive corrosion protection - Grounding connections - Delivered with pipe connector (no fan/no arm) - Options: Arms CAMARM1620P 160 diameter, arm length x 2 m or CAMARM1630P 160 diameter, arm length x 3 m - Optional: Fan/motor unit ZWR-03 + Switch_03 - Optional: fixed back panel & two hinged side panels - Optional: rotating round plate with a diameter of 350 for easy maneuvering of workpieces during operation...

... suitable for a wide range of operating conditions - for a broad spectrum of different response temperatures and viewing angles, including application-specific designs (e.g., cooling housings, air connections) - IR light guide cables available in various lengths - fully electronic...

...The Rotameter model BA is a high-quality acrylic flow meter. It is designed for monitoring low air flow rates. It features a control valve and an adapter for connection to plastic hoses. Common applications include gas flow measurements for analytical devices, air purification systems for enclosed spaces, and differential pressure measurements. Body: Acrylic (PMMA) Valve housing: Aluminum Valve spindle: AISI 316 Seals: Nitrile (* Viton®, EPDM) Connector: Nylon Float: AISI 316 Accuracy: ± 10 % (F.S) Max. pressure: 10 bar Max. temperature: 75°C Connections: For hose Ø 6mm / 4mm Weight: 60 g...

...Operating temperature range: -20 to +50 °C Hysteresis: 0.1% Medium: Air, all non-aggressive gases Output signals and supply voltages: IDS 2-010: 0-10 V RL >= 2 kΩ 24 VDC/AC +/-10% IDS 2-420: 4-20 mA RB <= 400 Ω 15-30 VDC Connections: Electrical: Screw terminals for 0.14-1.5 mm² Pneumatic: 2 connections for hose with 6 mm or 4 mm inner diameter Cable gland: PG7 Connection assignment IDS 2-010: Terminal block: 1 : + 24 VDC/AC 2 : Output 0 – 10 V 3 : GND Connection assignment IDS 2-420: Terminal block: 1 : + 24 VDC * 2 : output 4-20 mA *...

...The DStacker is designed for exceptionally high pallet turnover and operates without the need for electrical connections or compressed air. Pallets are stored in a space-saving manner, preventing hand or back injuries from manual pallet handling and damage from falling pallets. The pallet magazine accommodates up to 55 pallets.