valve system

...Dimensions: 1640x2140x2200mm Dimensions of trolleys: 800x800mm Capacity for 400g bread: 120 on 15 levels Capacity for baguettes: 180 on 18 levels Electrical consumption: 68 Kw / 105A Hinges thickness: 120 mm Electric and programmable valve Insulation thickness: 100 mm Cooking chamber in stainless steel Door with 2-point closure Halogen lighting Quick and secure loading system (guidance and self-locking of the trolley) Double glazing, insulating, low emissivity, ventilated, easy to clean Delivered as standard with hood and one trolley...

...Maximum spin speed: 1400rpm Finish: Light grey 28 programmes including three custom programmes Anti-leakage system and child lock ECO cold and hot water connection – saves up to 70% of electrical consumption and 20% of the programme time Connection: 400V / 3ph / 16A / 50Hz / Max effect: 4.6kW Can be reconfigured to: 230V / 1ph / 13A / 50Hz / Max effect: 2.4kW Available with pump or valve drain system...

... a boiler, it is an integrated (All-in-one) heating system which includes a circulator, an expansion vasel, a safety valve, an automatic air vent and an automatic filling valve with a manometer, which is ready-to-use, with no need of further intervention to the installation space. Its clever architecture offers maximum performance and economy compared to a simple boiler. It is available at a power range 8 to 32 kW and is auto-cleaning.

...without chain storage. Delivered with its air purifier AC60-F10DE-BT. Standard equipment for Pneumatic hoist TMH: - Optimal load control, very precise positioning - Precise variable speed control - Air shut-off valve - Mechanical end-of-travel stop system - Integrated load limiter - Low noise level - Working air pressure 0.4 – 0.63 MPa (4-6.3 bar) - Air exhaust hose - Control cord (C) Technical specifications of the pneumatic hoist TMH: SKU: PALREDTMH Capacity: 3000kg Length: 3m...

... M4SF Ideal for children. No cooling system. Room temperature water jet operated by push button. COOLING POWER (W):350 POWER CONSUMTION (W):200 VOLTAGE 230V 50Hz single-phase (A) (Consult other options):0.9 COOLING CAPACITY (l/h):30 WATER FLUX SPEED (l/h):60 WATER OUTPUT TEMPERATURE (ºC) (Regulate by thermostat):4-11 REFRIGERANT GAS (CFC - free):R290 WATER TANK CAPACITY (l) (Optional: stainless steel direct chill):4.5 Weight (kg):23...

...The valve grinder is breaking new ground in valve grinding. Instead of the traditional colletor chuck/lock assembly, the "DoubleV" working system gives very sharp and precise results and is extremely easy touse.The unique valve locking system is applicable to a wide variety of engines. MAX PORTABLE VALVE HEAD DIAMETER:90 mm MAX CONNECTABLE HANDLE DIAMETER:16 mm MINIMUM CONNECTABLE HANDLE:330...

...The SF type limit switch is designed for equipping quarter-turn pneumatic actuators and manual valves. It allows for easy and direct visualization of the valve position and feedback to the control system. With a robust construction, it can be installed outdoors. The position indicator provides excellent visual reading of the valve's position. The SIF version, fully ATEX certified (housing and...

... time of lamps:10.000 h max. delivery rate rotary pump:6 m³/h weight (without quartz granulate):34 kg quantity quarz:35 kg valve filter tank:top mount 4 port valve protection grade:IP 54 electrical connection:230 V over current protection:10 A...

...TOPAZ differential valves are the ideal valve for water tanks in pressurised systems. The float valve with diaphragm offers a high flow rate of up to 200 l/min. Furthermore, an adjustable level control from 50 mm up to 2500 mm is possible. This minimises the number of start-stop operations of the pump system and ensures minimal pump operation. Material:ABS, Nylon Seal:EPDM Max. Temperature:60°C...

... Each valve is equipped with a dry contact that allows for control (e.g., power cut, machine stop, ventilation...). You can discuss with us and create a quote together to find the best solution for your safety.

...Our VIAjet™ V-Series drop-on-demand valve jet printheads are considered the most durable and reliable printheads in the industry. This marking system delivers excellent print results even at high printing speeds, requires minimal maintenance, and can be used in any work environment due to its robustness against dust and moisture. Feel free to get a firsthand impression of our drop-on-demand...

...This system is designed to fill cylindrical jars with dense products and seal them with T.Off caps. It includes a volumetric doser with a stainless steel pump, electronic dosage control, a drip-proof valve, a metal cap dispenser, a cap presence control system, and a pneumatic screwing machine. The operations take place on a star with loading from a conveyor. Suitable for specific jars and caps, this machine ensures a production of 1200 jars per hour of 500g (honey, jams, etc.).

... 30 groups of formula for use Free to set target filling amount in order to be convenient for different packing Filling with one button, easy to operate (manual operation mode available) Division:10g Filling Capacity:10~30kg Filling Accuracy:≤ 0.1% Filling Speed:120~240 Pail/hr Barrel Dimension:≤φ400×h500mm Air Pressure:0.4~0.8Mpa Filling Valve material:SUS304/316 Power:AC 110V/220V, 50/60Hz, 10A Operating Temperature:-10°C to 40°C...

...2-way ball valve in 3 pieces [Valpres Art. 710000 F/F - 711000 SW - 712000 BW], made of AISI 316 stainless steel, with electric actuator.

...DIAMANT check valves can be used in all systems where there is a need to prevent the reverse flow of fluid. They are particularly suitable for installation in boilers on the discharge pipes of circulation pumps to ensure that the flow occurs in one direction only, thus preventing backflow. They are also necessary to prevent the system from draining in the event of a pump shutdown. DIAMANT check...

...The highpressure pumps of the 2series with operating pressures up to 750 bar and volumetric flow rates up to around 230 l/min are ideal for cleaning pipes and tube bundles, containers and containers.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids. The 2series impresses with a good price/performance ratio due to long service lives – even in rough everyday work. Medium:Water Operation:Without engine...

... applications. Here we can only show the tip of the iceberg. Challenge us! Nominal sizes::DN 65 - DN 250 Length::EBRO factory standard Top flange::EN ISO 5211 Flange connection::Pipe system - clamping ring groove Max. operating pressure::max. 3 bar Temperature range::-10°C to +130°C, (optional 220°C) (depending on pressure, medium, and type of drive) Housing::Aluminum Disc::1.4301 Shaft::1.4401; 1.4571 or alternatively as specified Gap between housing/disc::0.1 mm to 0.5 mm, depending on application...

... system pressures. The drives have small diameters and are arranged in tandem, one behind the other. This means that these valves can be installed next to each other to save space, even in extremely confined spaces. A version with a hose seal is available for heavily soiled or sticky media.

...Baudach Industrial Technology offers semi-automatic and fully automatic filling systems that can be used in almost all bulk material sectors. Since each of your products has its own requirements for the filling system, we provide not only standard systems but also custom designs tailored to your specific needs. Filling systems for • open bags • valve bags • large containers (Big Bag, Octabin) • rigid containers (buckets, cartons, barrels)...

...The Rotex 3-way Normally Open solenoid valve is a high-quality and versatile component designed for controlling the flow of fluids or gases in a wide range of applications. With three ports and a Normally Open configuration, this solenoid valve is ideal for diverting or mixing flow in a system. Its reliable performance, durable construction, and easy installation make it a popular choice for...

... are well supplied, accessible, and ergonomic. The installation is durable and can easily evolve. Available in a lockable version. For more information, visit our website: www.prevost.fr Or check out our YouTube channel: https://www.youtube.com/channel/UCRFAuStAuAHP8F6U8lZM9SQ Technology: PPS Grip Concept Vacuum: -0.98 bar (98% vacuum) Material: Aluminum tube and fittings Compliant with standards: TÜV, REACH, Qualicoat Operating pressure: 0 to 16 bar Temperature: -20°C to +80°C Key feature: Scalable system...

... machine: 1,510x860x910 mm Usable dimensions of the loading grid: 1,450x730x685 mm Counter height: 1,210 mm Tank capacity: 1,182 L Auxiliary tank capacity: 191 L Ultrasonic generator power: 5,000 W Heating resistance: 18 kW Control panel: 7" Touchscreen Power supply voltage: 230 - 400 V Pneumatic elevator with agitation: Yes Maximum load of the elevator: 800 Kg OPS oil removal system: Yes Cover: Automatic Drain valve: 2"...

...Vertical packaging machine for creating bags with four seals, square bottom bags, and pillow bags. The packaging machine can be equipped with various accessories including a valve applicator, nitrogen injection system, weight control, and many others.

... part of the cooler, there is a discharge mechanism which ensures even removal of material from the cooler chamber. Model/Type:VK-RP Material:structural steel, stainless steel Discharge mechanism:inlet valve, adjustable system for uniform layer of material Inlet valve type:gear Capacity:2.5 – 25 t/h Manufacturer:Geelen Overlay:paint, spray painting Cooler chamber:inspection holes, filling level sensors, fire safety systems Discharge system:triple movable grit ...

... handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option...

... progressive water valve, the water supply can be exactly regulated, which makes the dust binding as efficient as possible and the mud formation as low as possible. In conclusion the K 970 is a pretty good choice for a wet cutter.

... water OKS 370 is suitable for use with the OKS Airspray system Also available as spray version OKS 371 Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions...

... satisfactory system. The material application can be done as a point, bead, or targeted using a specially manufactured applicator. If a surface application is required, the medium can also be sprayed using a spray valve.

... suiting to Russia, Kazakhstan, Belarus, SELO code in China, South Korea 40 bar certification. NR13 for Brazil… HP – 40 bar piping and accessories 40 bar piping between the compressor, HP air receiver and the HP dryer flanges, supports, safety warrant and mounting accessories, shut off gates /40 bar stop valve is included in standard. Also available : – accessories for specific HP connection installation before the dryer ; elbow… HP- 40 bar air Dryer options Stainless steel condenser, dew point alarm, Bekomat draining system. Water cooled condenser is recommended for ambient temperatures...

... +25°C / 60% R.H.) with liquid reservoir and evaporator equipped with R404 thermostatic expansion valve (for both housed unit version and non-housed unit version). Defrosting with self-evaporation (via resistance) for housed unit versions, with recovery tray for non-housed unit versions. Electronic control panel Eliwell. Upper glass shelf, with "protected" lighting and an intermediate shelf, with...