particularly tubes

...ø3 - ø25mm press bar wall thickness up to 1mm processable repeat accuracy 0.05mm cycle time approx. 3-8 sec. The segment former SF25CNC is particularly suitable for pressing rotationally symmetrical components (tubes, sleeves, housings) without interfering contours that can be inserted between the pressing jaws into the machine.

...The medium wave infrared radiators INFRA RODON, featuring radiant elements made of quartz tubes, also known as infrared lamps, are characterized by a high speed in reaching their operating temperature and an equally rapid cooling after being turned off. This feature can be particularly useful, for example, in production lines with intermittent work cycles where frequent stops and starts are necessary, and there is a desire to minimize the time required to reach the steady-state temperature.

...The SBM 1 is suitable for insulating long, cross-section-independent rods, particularly switch tubes. Due to its design for accommodating the bodies, it is also possible to wind slightly curved switch tubes within limits. Up to 2 bands can be processed simultaneously, even if they are of different band qualities. This device has been designed as an I-axis NC machine as intended. Various band...

...Recommended for use when using flexible delivery tubes. Fitted between the grease gun and the hose, its swivel action prevents kinking. Particularly useful for positioning on to hook-on nipples. Thread 1/8” BSP Part No. RC1 for flexible delivery tubes:swivel action prevents kinking useful for positioning on to hook-on nipples:Thread 1/8” BSP...

... voltage - it is a laminate suitable to meet the technical requirements of F.S., Navy, Air Force and electrical transformer specifications thanks to its inalterability in hot oil High Frequency AF bakelized paper - it can be sheared based on alpha cellulose paper and phenolic resin; it has high dielectric characteristics even in a humid environment and is particularly suitable for the audio visual and telephony sector...

...About 70 automatic, multi-spindle turning machines for series production of high precision parts, can machine bars or tubes with a capacity from 5mm diameter to 100mm. Torneria Serra relies on its machining mostly on GILDEMEISTER, MORI SAY, PITTLER, WICKMAN lathing centers. In order to increase the already high productivity of such machinery, the lathers have been equipped with automatic bar loaders. These machines are particularly suitable for high series production volumes of average complexity.

...QUADRO 50 takes its name from the square steel tubes with a diameter of 50 mm that form the base profile of the system. Thanks to the unique properties of the ductile cast iron elements, it is possible to achieve a load capacity that is above average. The overall static performance of the system is also particularly high due to the combination with steel profiles. Thanks to its excellent design...

... bent and not welded, reducing the risks of leaks and breakage. The DAV PS-SNAKE are particularly suitable for immersion in liquids or for cooling/heating oily gases, as in plants for processing fish, meat, and cured meats. The smooth surface of the tubes can indeed be cleaned easily and quickly with a steam jet or a pressure washer, resulting in low maintenance costs.

... spindle insert tubes are manufactured. All loading magazines and material feeds from Breuning IRCO operate on the turning machine side with spindle insert tubes. Their precision and quality are of vital importance for precision turning. Additionally, the spindle is relieved by an exact material guidance. Utilize the expertise of Breuning IRCO for high-quality spindle insert tubes. All spindle insert tubes are statically balanced. For particularly high demands, dynamically balanced spindle insert tubes can also be supplied.

...MiniCollect® tubes are suitable for the collection, transport, and processing of capillary blood. Capillary blood collections are particularly recommended for patients with special venous conditions, young children, geriatric patients, and those for whom only a small amount of blood is needed. MiniCollect® tubes are available in volumes ranging from 0.25 to 1 ml and with various additives.

...The tubes made from the high-performance polymer PEEK are used in many different sectors and applications, particularly in the semiconductor or oil and gas industries. PEEK is often the material of choice due to its thermal, chemical, and creep resistance, as well as its thermal stability and compressive strength. Dimensions are as important a factor as the application itself. ARKPEEK has...

... resistance, high temperature, corrosion, pollution, porosity distribution, long service life and easy to regenerate, which is particularly suitable for a variety of gas, liquid filtration and fluidized process. * Good electrical insulation * High dimensional tolerances * Excellent corrosion resistance * Very high working temperatures * Excellent thermal shock properties...

... chain and is equipped with a toolbox, making it an extremely practical tool for everyday work. Thanks to the surface treatment in the form of RAL powder coating, the platform is resistant to corrosion and mechanical damage, which increases its lifespan. Optional custom wheels allow for easy movement of the platform at the workplace, which is particularly useful in dynamic work environments. The VWP150 is an excellent choice for companies looking for solid and functional equipment for working at heights.

...-Ray scattering) measurements can be made with our mark tubes, which are also named XRD capillaries. The wall thickness of only about 10 µm makes the tubes particularly suitable for high-precision measurements. Thanks to the wide funnel at the upper end, samples can be filled easily into tubes even with the smallest diameter. Absorption coefficients Our test tubes are manufactured of various types of glass with different linear absorption coefficients, so that a suitable tube can be found for practically every application. High quality standards are maintained during production, which...

...For the construction of hydraulic and pneumatic piping within hydraulic circuits, choosing a good steel tube can ensure durability and a long lifespan for the entire system. At RVS, you will find various solutions of cold-drawn steel tubes that are appropriately treated to withstand the typical stresses of the industry, particularly the passage of pressurized hydraulic oils that enable the...

... exceptional resistance to chemicals. PEEK shrink tubes provide a protective layer for sensitive or critical components as an alternative to conventional materials. PEEK shrink tubes are particularly effective in environments where extreme heat or cold, high pressure, or chemicals, water, or dielectric interference threaten wires and electrical components.

...High-quality optics - Sturdy design Material: Polyethylene Color: black Features: The ribbed plugs are particularly suitable for pipe ends and ensure a perfect grip due to the ribs.

... required to move large control surfaces that bear heavy aerodynamic loads, and are critical to the safe operation of the aircraft. As such they have a high strength to weight ratio. Their effectiveness is important when it comes to aircraft operating costs, particularly where fuel consumption is concerned. Please note that we have a minimum order value of £10,000.

...PRECISION STE EL TUBES •EN 10305-1 •EN 10305-2 •EN 10305-3 •EN 10305-4 (HPL) •EN 10305-5 Seamless, cold-drawn precision steel tubes EN 10305-1 Seamless, cold-drawn precision steel tubes have a particularly high dimensional tolerance with regard to the outer and inner diameter and/or the wall thickness. T Facts and Figures Diameter (OD)4 mm – 125 mm Wall thickness (WT)0,5 mm – 13,0 mm...

...Used for a variety of installations, particularly in masonry chimneys for improvement or restoration. Its main advantages are the speed and ease of installation, as well as the fact that it avoids the use of certain accessories, making the installation more economical.

...The range of food-grade PVC pipes includes pipes particularly suitable for the suction and delivery of liquids and food/pharmaceutical ingredients, and they are regulated according to current standards.

...Centrifugal fans, also known as radial fans, are particularly suited for corrosive professional environments (dust removal, smoke extraction). They offer a long lifespan and optimized use with numerous variants. Made from anti-corrosive plastics such as PE, PP, or thermoplastic, they can be injection molded or plastic welded. We offer several types of centrifugal fans, tailored to your needs...

...the versatility of this hollow square construction tube is a true boon for both amateur DIYers and professionals! Square metal tube 30x30: for what uses? Cutting, welding, gluing, drilling, screwing: so many different ways to work with square metal tubes. Imagine all that you could do! The square black steel tube comes in several dimensions, ranging from one to four meters in length. The 30x30...

...Uses such as construction steel make this metal profile a particularly suitable material, for example, in the construction of gates. This stainless steel tube can be used for cutting and can be treated for corrosion resistance, as well as welded. Whether indoors or outdoors, depending on the chosen thicknesses, these square tubes or metal tubes can help you create garden greenhouses, iron gates...

... plate. A venturi consists of a converging inlet section leading to a cylindrical throat, followed by a diverging section that gradually opens. This allows the fluid to regain almost all of its inlet pressure. It is therefore particularly suitable for flow measurement in low-pressure systems. The machined venturi is especially suitable for small diameters.

... offered in 45, 90, or 180 degrees or according to your requirements. Please note that we provide large dimensions in welded fittings, particularly for your needs in elbows and reducers. Sopromet also offers machining of the ends of fittings upon request. Product certificates available upon request. Standard EN 10253: Quality P235GH / P265GH / 16MO3 / 13CRMO45 / 10CRMO910 Standard A234: Quality WPB / WP1 / W11 / WP12 / WP22 / WP5 / WP9 / WP91 Standard A860: Quality WPHY 52 / 60 / 65 Standard A 420: Quality WPL6 Standard A 403: Quality WP321 / 904L...

...The STF-W sleeve is a special formulation based on polyolefin that offers excellent mechanical and electrical properties. It is available in diameters ranging from 9 to 350 mm before shrinking. It is particularly suitable for mechanical protection and sealing of cable splices, as well as electrical insulation for low voltage applications. It can also be used in plumbing for connecting pipes of...

...FeCrCo magnets exhibit higher magnetic properties and contain 50% less Co compared to AlNiCo magnets. Another advantage is their extremely high dimensional accuracy. The permanent magnetic alloy impresses with its outstanding plasticity and toughness, allowing for significantly more flexible processing. Depending on the application, a variety of shapes and sizes can be produced. FeCrCo magnets are particularly suitable for the manufacture of elements with precise dimensions and complex shapes, such as wires, rods, strips, tubes, etc. (small, thin, with stripes).

...Exposing gas lines, power lines, water pipes, tubes, and cables, emptying bunkers, tanks, silos, suctioning sludge, suctioning substrate from roofs Exposing utility lines. (Head hole) Our vacuum excavator allows for a particularly gentle suction technique, enabling excavation without damage, with minimal environmental impact, and above all, efficiently: We remove gravel, soil, or construction...

...These products are used to manufacture both welded and bolted structures, in the field of constructions, engineering, industrial constructions, transports, automotive, agricultural machinery and earth moving machinery. The cold finished tubes are particularly suitable for structures at sight or for aesthetical uses, thanks to the surface aspect typical of cold forming. NORMS HOT FINISHED” TUBES EN 10210-1/2 COLD FINISHED” TUBES EN 10219-1/2 INSIDE TRIMMING EN 10217...