interface module

... are no limits to the versatility of processing modules. The success of Klüppelberg, particularly through the continuation of the Kolb idea, is exemplified by an innovative solution developed for the company Liebherr. By using a special processing module manufactured by Klüppelberg, the annual capacity of a machine on the workpiece was increased by more than 30%.

... integrated alongside the standard modules at any time. Each module passes the measurement values to an output module. A universal PLC interface enables easy connection of S7 controllers via Ethernet. For integrators with their own software expertise, Software Development Kits are available. QuellTech has extensive experience with non-contact measurements: We can perform an initial test measurement of your sample, after which you will receive a free assessment of the feasibility of your measurement task with a QuellTech laser scanner. Technology: LASER LINE TRIANGULATION...

... concerned, the controller matches the FIO I/O modules, which can be attached directly to form a mechanically and electrically homogenous unit. Using an additional extender module also the control of remote EtherCAT slaves is possible. It can be easily integrated by the number of interfaces (Industrial Ethernet, RS232, CAN) and supported systems into existing control concepts. ; Fanless ARM...

... humidity:0...100% RH on 0...16383 (dec) or 0x0000...0x3FFF (hex) Temperature measuring range:-40...+125 °C Temperature measuring principle:PTAT (integrated) Accuracy:±0.2 °C (at 0...60 °C) Output scaling temperature:-40...+125 °C on 0...16383 (dec) or 0x0000...0x3FFF (hex) Response time temperature:T63 <10 s Interface:0x28 or alternative address Tube length:32 mm Tube diameter:13 mm Tube...

...Name: USB C to Lightning Cable Color: Gray Interface: USB-C Male / Lightning Male Module Model: C94 (Lightning Connector + Chip) Interface Technics: Nickel-plated Transmission Speed: 480Mbps Conductor: Tinned-copper Shell: Aluminum Alloy Shielding: Aluminum Foil + Metal Braided Jacket: TPE + Nylon Braided Jacket AWG: 1m: 24 + 30AWG, 1.5-2m: 21 + 30AWG OD: 3.5mm Length: 1 / 1.5...

...The TS torque sensors provide accurate torque and speed measurements. Each model is equipped with a conditioning electronic module that outputs a signal from 0VDC to ±5VDC (±10VDC) via an 8-pin connector, as well as a USB interface that can be connected to a computer. The sensor comes with software that allows for connection and data acquisition. The angular encoder provides a minimum of 360 PPR...

...) -20℃ ~ +120 °C(W/ Radiation) 30% ~ 95%RH (W/O Radiation) 20% ~ 80%RH (W/ Radiation) 12.1" color touch screen Graphic User interface Intuitive control features and easy-to-use programming logic 6 Channel DAQ integrated for temperature sensors Multi-source temperature control pre-implemented and selectable in user interface Pre-wired for BST (Black Standard Temperature) sensor and control Pre...

... detection. Furthermore, with its intuitive touchscreen display, the HLD6000 is even easier to operate than its predecessor the HLD5000. The HLD6000 leak detector also delivers the maximum in communication diversity. A USB interface as well as an optional I/O module and an optional fieldbus module are available for acquiring and using measurement data and integrating that data into local networks. COMPACT...

...The CEC10 enclosures provide space for a 2.5-inch HDD/SSD or other expansions. With the integrated PCI-Express Mini Card slot, the new CEC10 can be expanded with any mPCIe module. The product features a unique board interface that offers 2x PCIe, 2x HSIC, 2x UART, SATA, SDIO, LPC, and I2C. This allows for maximum customization for any I/O boards and enables the system to be expanded with...

...3U VPX AIR-COOLED SSD MODULE WITH PCIe INTERFACE to VPX backplane adds SSD to a VPX system with a single 3U VPX slot featuring COTS 2.5" SATA Solid State Drives (SSDs) that offer capacities up to 20 TB and transfer speeds of up to 600 MB/s. Options for FIPS140-2, FIPS197, TCG Opal, and military wipe.

...Fieldbus Module Connection with EtherCAT Interface The EtherCAT®1 Slave Fieldbus Module offers 24 digital inputs and outputs. M12 D-coded 4-pin connectors ensure a reliable electrical connection. The module is IP65 protected on the front side. With dimensions of 37 x 252 x 25 mm, it is very compact. The load current is max. 2 A, and the total current of all outputs is max. 6 A. This I/O module impresses not only with its versatility but also with an excellent price/performance ratio.

... supply. The integrated recirculation increases the yield of pure water and reduces raw water consumption. A pressure tank serves as a permanent water supply for the pump station and is hygienically sealed, unlike a conventional tank. Advantages: No limescale deposits in the pipelines Reduced mineral input into the room PLC with web interface series Remote maintenance optionally available Automatic Cleaning in Place UV disinfection optional Low-pressure membrane technology increases membrane lifespan...

... distinguished by its suitability for harsh industrial conditions. The module features an SD card slot for accepting SD and SDHC type SD cards. Control of the module is achieved through connected buttons, digital and analog inputs, or via various serial interfaces. A connection for additional electronics for linking to an RS232, RS485, LAN (XPORT), or USB interface (FTDI-IC), as well as an LC display, is provided.

...Cost-effective solution for remote access to the controller The communication module KM2 is the ideal interface between a solar or heating controller and the internet. Through the simple and secure connection to the visualization portal VBus.net, system data can be visualized, and reports on system status can be provided via email. With the RESOL parameterization tool RPT, parameterization of the controller over the internet is possible.

... and configurations (rules and attribute mappings) are made within a user-friendly interface. - Isometric takes over the piping networks created with Piping Design, including all components and properties. - Isometric processes all existing information and automatically creates the isometric drawing in DWG, DXF, DFT, SLDDRW, or DGN (MicroStation). Software: Isometric Drawing...

...The SYS TEC USB-CANmodul1 is a reliable and cost-effective PC CAN bus interface solution to connect a CAN bus to a PC via USB.

...ODOT B series integrated I/O module consists of communication board (COMM board) module and extended IO module. The COMM board could select the corresponding bus module according to the communication interface of the controller system. The mainstream industrial communication protocols include Modbus, Profibus-DP, Profinet, EtherCAT, EtherNet/IP, CANopen, CC-Link, PowerLink, etc. The...

...Compact 2D imaging module for data capture USB Interface IP 54 & Designed for industrial applications CM3680SR-XXX: Standard Performance (Standard Range) CM5680SR-XXX: Enhanced Performance (Standard Range) CM5680WA-XXX: Specialized Performance (Wide Angle) CM2180MP-XXX: Specialized Performance (Megapixel)...

... common than cloud-to-ground strikes, makes the BTD-300 much more sensitive to the presence of storms compared to devices that rely on radio detection. The electrostatic operating principle allows the sensor to warn of the risk of overhead lightning before the first discharge occurs. Virtually maintenance free in operation, the BTD-300 can either interface directly to an integrated system or be operated using the supplied PC compatible display and logging software. The optional warning relay module allows the sensor to automatically sound alarms whenever a storm approaches.

...Keyfax Repairs Diagnostics helps customer service staff diagnose tenants repair requests. Through a graphical interface it guides the conversation to identify exactly what the issues is, how it was caused, the priority, and automatically assigns the correct SOR code(s). So repairs are diagnosed correctly, first time, and tenants are satisfied. It is easily integrated with all of the major Housing Management Systems through a RESTful API, so communications are completely secure. It is also available in a tenant self-service module "Keyfax Repairs Online".

...AM-OUT2R is an addressable module used to control fire automation equipment in the Tiras PRIME A system. Connects to the addressable interface and adds 2 relays 10A/230V, capable of switching the voltage of both direct and alternating current. SUPPLY VOLTAGE:24 V CURRENT CONSUMPTION:0.45 mA OVERALL DIMENSIONS:100х100х30 mm ENCLOSURE PROTECTION DEGREE:IP30...

... measurement. The 'plug & play' software interface instantly enables application engineers to access sensor modules without the need for tedious and time-consuming programming. Sensor modules are tough, durable, waterproof, shock resistance, small footprint and enabled to communicate through various protocols such as USB, RS232, RS485 & Bluetooth. Digi-Pas® DWL-5000XY is a 2-Axis Precision Inclination Sensor Module of accuracy (0.01° or 175µm/M or 36 arcsec) Digi-Pas® DWL-5500XY is a 2-Axis Precision Inclination Sensor Module of accuracy (0.001° or 18µm/M or 3.6 arcsec) ...

...Supports 10 input zones and 10 outputs. It can be connected to the MASTER A22 ATRIUM control unit via RS485 interface at distances of up to 1220 meters using a 4-wire communication bus. The module can be programmed through the Atrium management software via queries. The Digital input & output module is capable of activating any type of equipment, including shutters, gates, doors, motors, lights, and alarms. Additionally, it can receive ON or OFF states from external devices. Enclosure dimensions (H x W x D): 298 x 285 x 78 mm...

...Robust CPU I/O Master Module with powerful 32-bit processor Control of up to 16 I/O Slave Modules Rugged design for harsh environments (certifications for shipbuilding) Integrated web server for convenient configuration and web-based visualization Freely programmable PLC according to IEC 61131 (CODESYS) Integrated 32 GB SD card (e.g., logging function) and USB interface Especially suitable for...

...Outline size（mm）： 80.00 × 36.00 × 11.00 Viewing Area： 64.50 × 14.50 Active Area： 55.70 × 11.00 Controller IC： ST7066U or Eqv. Interface： Parallel Backlight：LED Remarks： 1×16PIN...

...All VC MIPI® camera modules are developed and manufactured by Vision Components in Ettlingen near Karlsruhe. They offer high quality, robust and industry-optimized design, as well as guaranteed long-term availability. The MIPI camera modules can be connected to all common processor platforms via the MIPI-CSI-2 interface. Vision Components provides the corresponding drivers free of charge.

...The WirelessHART Adapter SWA70 is an interface module for the wireless transmission of 4 to 20 mA/HART signals from connected field devices to a WirelessHART Fieldgate. It is powered by either a battery pack or power supply units. The WirelessHART Adapter can be used in hazardous and non-hazardous area for applications.

Smart Light Solutions GmbH exclusively distributes IT security products under the brand SMARTKEEPER. A cybersecurity system that secures all common hardware interfaces against unauthorized access. What is SMARTKEEPER: SMARTKEEPER is a physical IT prevention security solution that offers various ways to mechanically lock and secure all critical input and output ports of IT hardware, such as USB p...

...> IP interface between computer network and RS485 fieldbus devices > Management of 2 RS485 buses, VDIP protocol to manage up to 120 readers and Apério protocol to manage up to 15 Apério locks per bus > RS232 connector for communication with external equipment > A second RJ45 socket with switch function > Radius authentication (802.1X) and support for SNMP protocol > Hood open contact > PoE power supply (or optional external) > ABS housing > H 210 mm x W 145 mm x D 65 mm...

...DM6: 6-digit digital display, 14mm red LED with Profibus, Profinet, CANopen, EtherCAT, or Modbus RS485 interface...