ground steels

...This steel angle is the perfect piece to reinforce the corners of a structure or to secure a guardrail to the ground or walls. This angle iron can easily be drilled, screwed, ground, welded, painted, or glued to fit all your constructions. It is a durable and robust 50x50 angle. Reference: CFLAM10419Q1 Width in mm: 50 mm Grade: S235JR+AR Length in m: From 1 to 4 meters Product Standard: NF EN 10025-1 Approximate Weight per Meter: 3.8 kg Section: 50 x 50 mm...

...INCLUDES: INTERNAL AIR COMPRESSOR LINCOLN LC30 4M AIR REGULATOR AND MANOMETER INTERNAL WATER SEPARATOR GROUND CABLE AND CLAMP POWER CABLE. The Tomahawk® 30K plasma cutting system is ready for fast and precise cutting. With the 30K, forget about the grinder: just grab the torch and cut in seconds. Features: - Maximum portability: the internal air compressor allows operation in environments where...

...Round stainless steel bar Execution: Cold drawn; Hot rolled; Forged Dimensions: Ø 2 to 500 mm Surface condition: Ground and polished; None Tolerance: ISO h8; ISO h9; None Option: All origins; Europe...

...Exceptional working characteristics Suitable for the repair of conveyor belts, rubber coatings and linings, as well as for joint seals Two component polyurethane cartridge system Short working and application times Fast, clean and flexible Dry to the touch after 2 minutes Can be ground back and finished after 30 minutes No volatile components Break , impact and abrasion resistant Max. hardness of 60 Shore A Manual application or using a spray system ...

...Protection pin Ø 50 mm galvanized Steel tube: Ø 50 mm Above ground height: 870 mm Width: 300 mm Finish: galvanized Fixing by direct sealing or on plates Available in Ø 60 mm version (see our related products below) Ref:201066 Steel tube: Ø 50 mm Above ground height: 870 mm Width: 300 mm Finish: galvanized...

...Stainless steel threaded rod 316 diameter 8mm (M8) length 100 mm accompanied by an M8 stainless steel nut. This M8 threaded rod, 10 cm in length, can be anchored for the fixation of side plates or to the ground. Reference: 9043.0810.6000 Material: Stainless Steel 316 (Outdoor) Usage: Indoor and Outdoor Cable diameter: 6 mm Thread diameter: M8...

...Excellent Cilia tweezers oblique 9.0 cm are ideal for plucking eyebrows due to their slanted gripping edge. Even fine hairs can be easily removed thanks to the perfectly ground grip edges. Order number:16009 EAN:4250550302192...

... carriage. •M 6 standard spindle. •Electromagnetic clutches “Goizper”. •Ground cross carriage designed for stops and rear turret. •Tempered and ground tailstock quill, locking by eccentric. •Commercial protections according to Royal Decree 1215/97. •Fagor two-axis display: Protection for the scales.

...Depending on the customers’ orders, the crystals are being ground on the outside diameter of a diamond peripheral sawing disk. We have got three centre grinders with a total monthly capacity 2000 kg. Maximum ground diameter – Ф200 mm. Accuracy 0.03 mm. Surface roughness - Ra ˂ 0.25.

...We supply wedge steels according to DIN 6880 - in fixed lengths and production lengths, - in all common materials as well as precision flat steels - in ground finish - cut pieces with machining allowance - or fully processed according to customer specifications. Our extensive material stock of all standard dimensions guarantees you a short response time.

...We intervene for the construction and installation of your new above-ground oil tank, whether in a basement or outdoors. Whether it is a single wall, double wall, or with a retention basin, we find the ideal solution for your installation. We work with top-quality steel and tailor-made solutions based on the specific situation.

...Positioner is designed in order to change the piece’s position, tied onto it, to the best and weld. It gives movement opportunity on two independent lines which are rotating and angular positioning. Positioners can be fixed to the ground according to weight and center of gravity of the work piece. Flange rotating speed can be sensitively adjusted with the control. Optionally it can be adapted with Column-bom system as to work synchronized. Rotator and positioning motors are equipped with thermic protector separately.

...-round ground indexable cutting insert allows for very high repeat accuracy. • Also very suitable for stainless steels and aluminum, due to the absence of burr formation. • This can significantly reduce processing time. • Each insert has two cutting edges. • No tool re-adjustment required after changing the indexable cutting insert. The revolutionary new concept of engraving tools with interchangeable indexable cutting inserts. It offers you the possibility, regardless of the material, enabling high speeds and feeds.

... kitchens (refrigerators, washing machines, kitchen sinks, etc.). Customers in this product area often operate as "Service Centers." Here, the sheet metal is ground, brushed, polished, or cut. POLIFILM provides an adhesive strength tailored to the grinding pattern. To identify the grinding direction, the protective films are printed with arrows and stripes.

...We manufacture taper pins according to standards or drawings with a diameter of 1-30mm, length: 4-250mm, made from various steel grades and stainless steels, turned, hardened, and ground. Galvanic finishing and threading are optionally available. • DIN 1 (DIN EN ISO 2339) • DIN 258 • DIN 7977 (DIN EN 28737) • DIN 7978 (DIN EN 28736) • and according to customer specifications...

...Hot rolled, profiled, extruded, drawn, annealed, pickled or bright annealed, ground, drawn automatic steel STAINLESS STEELS ACCORDING TO DIN 10088-1 • Ferritic stainless steels • Martensitic and precipitation hardening stainless steels • Austenitic stainless steels • Austenitic-ferritic stainless steels SPECIAL MATERIALS • Corrosion-resistant materials • Heat-resistant materials • High-temperature resistant materials • Heating conductor and resistance materials • Expansion and glass melting materials • Soft magnetic materials...

...Milling of steels - Milling of hardened steels up to 65 HRC Whether frame plates, form plates, etc. need to be drilled, turned, ground, or milled in the 2D area, or contours need to be milled in the 3D area, we manufacture according to your specifications.

...cost savings in production, optimal manufacturing processes, and precision parts that are safe and reliable in use for years. The steels with short-breaking chips are offered by Günther + Schramm in ground or drawn form. - ETG 88: approximately 6 to 114 mm diameter - ETG 100: approximately 6 to 70 mm diameter...

... gears, hobbed gears, or ground gears Modern materials like high-alloy steels, aluminum and titanium alloys, as well as plastic and aerospace materials Various heat and surface treatments Spur gears Bevel gears Rack and pinion Worm drives Profiled gears...

... as highly alloyed stainless steels such as: 100Cr6 Cf53 Ck45 X46Cr13 X90XrMoV18 available upon request Processing hardened or unhardened ground turning, drilling, milling, threading, stamping, grinding, knurling, polishing, vibratory finishing chromed and coated available upon request Dimension Range Ø 0.8 mm - Ø 20 mm Length up to 400 mm Tolerances Ø Quality IT6/IT5 Roundness up to 0.5 μm...

... indicates to the installer how far to embed the rod into the ground: A traditional machined groove, or a paint marker, or, as an innovation from IBF, the installation of a heat-shrink plastic ring, whose color helps prevent diameter or length errors on construction sites. We can also offer these rods in different stainless steels, particularly in HRC (High Resistance to Corrosion) stainless steel.

...A key focus of our company is the manufacturing of individual parts or complete solutions based on customer drawings or our own custom designs. Our modern machinery covers the manufacturing areas of CNC milling and turning, welding, grooving, and assembly. In our material warehouse, we constantly stock pre-ground flat materials made from various tool steels, aluminum plates in precision-milled...

...VHM Spiral Drill Short Drill - Solid Carbide Ø10mm-Ø20mm VHM SHORT DRILL - suitable for steels, stainless steels, titanium, cast iron, and aluminum - precisely ground cutting edge - high wear resistance - using a short drill often eliminates the need for center drilling...

...Materials: all machinable plastics, non-ferrous metals, steels, stainless steels Dimensions: x = 760mm y = 400 mm z = 500 mm Quantities: small, medium, and large series Post-processing: turning, drilling, milling, sawing on appropriate post-processing machines Surfaces: ground surfaces as well as all galvanic and thermal post-treatments by external partners...

... be rotated and positioned with a cutting width of 2 mm Features - Stable cast construction with chip drawer - Hardened and ground guides, wear-resistant - Precise bevel adjustment with micrometric screw - Various reversible cutting inserts for different materials - Long service life thanks to square and radial reversible cutting inserts ASO 650:10229 ASO 650 - WSL:10230...

... chips are captured, ground, and discharged. SXC series with interchangeable flange for vertical or horizontal connection with threaded connection for a G ¼ pressure gauge. Flow rate: up to 1000 l/min Height: up to 20 m of pressure height Fluid: for cooling liquid, cutting and cooling oils on request Drive: electric Priming: semi-submerged Technology: centrifugal Field: industrial, for machine tools, for the metallurgical industry Other features: abrasion-resistant, vertical mounting, with cutting mechanism, for emulsion, shredder, for cutting fluid...

...At customer request; Concave corner radii can be ground down to 0.02mm; Full or partial profile possible Our carbide thread steels are manufactured according to customer specifications. Concave radii are possible down to R=0.02. The tools can be ground in the pitch or on all sides. We can produce carbide thread steels with the following dimensions: Shaft diameter = 1-25mm Item: 066...

...HSS-Co5-RG (reduced burr formation) Spiral Drill Stainless Steel Drill DIN 338, Type N, right-hand with cylindrical shank, 5% cobalt alloyed, short and bright finish, profile-ground quality, with special tip Application Area Spiral drills with pronounced hot hardness resistance. For drilling alloyed and unalloyed steels and cast materials with strengths over 800 N/mm², particularly hot and cold work steels, rolling bearing steels, high-alloy steels, as well as heat-treated and case-hardened steels, stainless steels, and VA steels.

...Comprehensive delivery program for precision flat steel, precision plates, standard bars, erosion blocks, and ground round bars Order precision flat steels, standard bars, precision plates, and ground round bars easily and conveniently online through our 1535° online store - available 24/7.

...Stainless steel, aluminum, brass, copper, red brass, bronze, gray cast iron Precision flat and square steel Pre-ground tool steel Quenched and tempered steels...