flange welding

...Flanges made of cast iron or galvanized sheet metal for sensors with diameters ranging from 6 to 32 mm. Flange with counter flange made of cast iron for welding, featuring a gasket made of ceramic fiber. Gas-tight connections with threads from M8x1 to 5/4" made of galvanized steel or stainless steel, with gaskets made of Teflon, ceramic fibers, or cutting rings, for sensors with diameters from 1 to 32 mm.

... steel tri-clamp fitting consists of four components: • two identical stainless steel fittings called "Clamp Stubs," which have a flange on one end and a welding end on the other. • a clamp, used to join the two Clamp Stubs; • a gasket, which is compressed between the two flanged fittings. The clamp ensures compression and guarantees a hygienic and secure seal. Gaskets are available in the following materials: NBR, EPDM, SILICONE (VMQ), VITON (FKM), PTFE (TEFLON).

... + internal/external flange, stabilizing feet, an inspection hatch with a diameter of 600 mm with a bolted cover, vent Dn100 + ventilation cap and mosquito net, a suction pipe with a flap strainer Dn100, symmetrical connection and cap, lifting rings, float valve, extensions, hinged opening cover, speed chassis, additional manhole, cradle for aerial mounting, junction between tanks. Model: CARELI In stock: 2 Products...

...For welding with tube 40 x 40 mm For screwing on Rustproof due to stainless steel AISI 304 Material:Stainless steel AISI 304 Surface:finely grinded Korn 240 Dimensions:100 x 100 mm Inner dimensions:40 x 40 mm Mounting:for screwing...

...In this production machine, a unit is assembled, welded, and calibrated from 5 individual parts. Two nozzles are welded onto a flange. This assembly is then joined with a corrugated pipe and calibrated. Additionally, a connector is slid onto the other end of the corrugated pipe. Workpiece feeders and a NIO shaft are present on or in the machine frame.

... installation Orifice plate material: Stainless Steel, Inconel, Monel, Hastelloy, PTFE, Duplex, Superduplex, Titanium, Tantalum, PVC, etc. Type of orifice flanges: Welding neck, slip-on… Type of pressure taps: Pressure taps in the flange: the high-pressure tap is located at 25.4 mm (1 inch) Material of orifice flanges: Stainless Steel, Carbon Steel, Inconel, Monel, Hastelloy, PTFE, Duplex, Superduplex, etc. Type of gaskets: Flat gasket (spiral gasket, graphite, PTFE) or RTJ (soft steel, stainless steel, Monel…)...

...Positioner is designed in order to change the piece’s position, tied onto it, to the best and weld. It gives movement opportunity on two independent lines which are rotating and angular positioning. Positioners can be fixed to the ground according to weight and center of gravity of the work piece. Flange rotating speed can be sensitively adjusted with the control. Optionally it can be adapted with Column-bom system as to work synchronized. Rotator and positioning motors are equipped with thermic protector separately.

...The Wally mounting flange from G-Fittings, made of stainless steel V2A, is designed for both indoor and outdoor use and is suitable for wall and floor mounting of stainless steel pipes or wooden rods in various diameters and finishes. The stainless steel pipe is inserted and secured with the included set screw. Welding is not necessary. The Wally flange is suitable for wall and floor connections for example for handrails, footrails, railings, support bars, structures, barriers, coat racks, and fall protection.

...Example Repairs of Machine Tools: Welding titanium on a misdrilled flange. Method: Laser welding. Repairs of Machine Tools by Laser Welding: We also weld titanium, among other materials. Here, a misdrilled hole on a titanium flange has been welded by us using laser technology. X-ray testing and salt spray tests confirm a flawless result. Interested in a consultation? Feel free to give us a call!

... joining systems. With a wide range of sizes and configurations available, the flange screws from ESINSA can meet any specific need. Additionally, we offer technical consulting services to help you select the right components for your application. By choosing ESINSA, you can be confident that you are opting for products that meet the highest standards of quality and performance, ensuring the integrity of your systems.

...Plug-in screens (start-up screens) Type S can be temporarily used as start-up protection in pipelines. They protect downstream components such as pumps, valves, ball valves, containers, meters, etc., from contamination during the critical start-up phase caused by welding beads, metal shavings, sealing residues, grease, and other small particles. After the start-up phase, they can be removed again...

... the soft-sealed radiator valve is absolutely oil- and vacuum-tight. Both types are absolutely tight in operation condition to the outside. Our welding neck radiator valves DIN 42560 type A NW 80 fulfil the tightness requirements and operating conditions in accordance with DIN 42560 as well as EN 50216-8. ...

...Especially suitable for thin sheets starting from 0.5 mm ISO - Particularly suitable for welding ISO nails with flange and ignition tip Construction Robust housing made of impact-resistant plastic Play-free ball linear bearing for guiding the welding piston Sealed welding piston guide Bolt length freely adjustable (up to 40 mm; from 40 mm with tripod) Safety Locking spring adjustment High safety against unintentional changes to the selected settings Guide protected from welding spatter Welding Welding in confined spaces Welding on painted sheets possible (bare welding point and ground required)...

... additional crane suspension for flexible on-site use. For variable connection to the system, connections for various flange sizes DN20, DN25, DN32, and even a connection option for a pressure gauge valve are included. This allows for efficient and straightforward pressure testing.

... forming VOSSFORM or WALFORMplus Pipe end forming according to DIN and SAE such as flanging, beading, and brake pipe flanging Soldering and welding of all common connection variants – metric, inch, JIC, ORFS as well as SAE flange connections and bolt circle connections Special connection variants constructed according to your drawing or designed by our team according to your requirements, we manufacture in the shortest time using state-of-the-art CNC technology in-house...

...Materials: Basic unit: 1.7225 and 1.4571, welding ends: 1.0305 and 1.4571, flange: 1.0460 and 1.4571 Construction: Stator (outer part) and rotor (inner part) connected with a two-path ball bearing factory-installed lifetime lubrication welded connection parts: welding ends, pipe bends, or flanges Dimensions: Standard: DN 125 to DN 700 Flanges: PN 10/16 according to EN 1092 others: according to ANSI (ASA), BS etc. possible Welding end: according to ISO recommendation...

... recommend installing an additional support frame to increase pressure resistance (see photo on the left). Standard version: - Flange St52-2 - Support screen mesh size 3.15mm; V2A - Fine screen mesh size 0.3mm; V2A - Available upon request with material certificate - Other materials (e.g., 1.4301, 1.4571) and mesh sizes available upon request...

...FITTINGS AND NIPPLES ADJUSTABLE STUD ELBOWS BANJO BOLTS BANJO FITTINGS BRAKER HOSE FITTINGS BSP FORGED STEEL FITTINGS FEMALE SCREWED MUFF FLANGE HOSE FITTINGS HORTUM EK RAKORLAR HOSE FITTINGS LOCK NUTS MALEHOSE FITTINGS METRIC FORGED STEEL FITTINGS NIPPLES NUTS AND RINGS ORFS FORGED STEEL FITTINGS PLUGS PRESSURE GAUGE CONNECTORS REDUCERS AND EXPANDERS STEEL SOCKETS SWIVEL REDUCERS TEST HOSE FITTINGS THE OTHER FORGED STEEL FITTINGS UNF FORGED STEEL FITTINGS WELDING NIPPLES...

... - Thermowell / protection tube: solid material (perforated) Insert / probe: mineral insulation (MI), flexible Outer diameter protection tube: 18.0 mm (0.71''); 24.0 mm (0.94'') Max. immersion length on request: up to 30,000.00 mm (1,181.10'') Material protection tube/thermowell: 1.0460 (A105); 1.4571 (316Ti); 1.7335 (13CrMo4-5; F-11); Hastelloy C276 (2.4819); Duplex SAF 2205 (1 Optional coating: Tantalum Process connection: welding version; flange:; DN25 PN40 B1 (EN1092); DN40 PN40 B1(EN1092); DN50 PN40 B1 (EN1092); ANS...

...Metalworking in-house Drilling / Fits (H7) Cutting a groove according to DIN 6885/1 Machining the hub / Turning down the hub Metalworking in-house Assembly of flange discs (pressing / gluing / screwing / welding) Inserting worm screws Creating cross holes on the pitch circle for axial attachment to the motor Custom manufacturing according to your requirements for prototypes as well as for series...

... groove provides a low dead space seal while still being able to compensate for slight welding distortion. This prevents the transfer of stresses to the sight glass. The guiding or holding groove for the seal makes installation easy and secure. AseptraLine® sight glasses have a component certification and can be used for pressure vessels up to Category IV, Module G (PED 2014/68/EU). A sight glass pairing consists of the welded flange, low dead space seal, sight glass, compression seal, and tension flange with screws. As standard, the...

...-quality swivel joint with shoulder seal: high resistance. • Cantilever mounting (single bearing), on a chair* or suspended (double bearing), with product entry on the tank side. • Available with square flange DN50 product entry & Elaflex type compensator (+ welding flange). • NEW!!!!!! AVAILABLE WITH INTEGRATED HYDRAULIC MOTOR.

...Thread - Welding - Compact Flange - EN558-27/1 (formerly DIN3202 F4/F1) - Flange PN6/10/16/40-ANSI150/300/600 - TA Luft - DVGW Gas - Antistatic - ATEX on request...

... Reverse flow direction GENERAL The starting screen VAS is used for commissioning and starting a system in order to clean gas from coarse soiling such as welding bead, scale, grease, etc. After starting, the starting screen can be removed from the pipeline. The design is carried out as a welding design. FUNCTION The starting screen VAS consists of a supporting basket made of perforated sheet metal with a welded clamping ring. These are galvanized after assembly. On the outside of the support basket a stainless steel wire mesh is welded.

... straight, conical, or tapered. The protector can be adapted to a pipe or tank using a selection of commonly used flange process fittings, threaded fittings, or welding sleeves. Standard immersion length max: 1500 mm...

...Formed elbow for cable ducts for horizontal direction change of 90° V2A formed elbow made of 1 mm sheet metal, 1.4301. For horizontal connection of cable ducts. Suitable for various dimensions. Long holes measuring 6.5 x 18 mm are used for fastening with V2A flat round screws with square neck and extra-large V2A flange nuts with serration. Alternatively, installation can be done by spot welding (resistance press welding). Application area: Plant engineering, food industry, aseptic areas...

...Dirt traps in angled seat form with flange connection or welding ends. Construction length according to DIN EN 558-1 Series 1, flange connection dimensions according to DIN EN 1092 Form B1. Housing material 1.0619 or 1.4408.

... 10 40 to 250 600 to 630W 12.5 40 to 300 200 to 900W 16 50 to 350 500 to 1800W Dimensions in inches (25.4 mm) Ø inch Ø mm Length Power ¼ 6.3 38 to 102 100 to 350W 3/8 9.46 38 to 165 175 to 750W ½ 12.61 38 to 305 250 to 1500W 5/8 15.81 38 to 305 400 to 1800W On request Other powers, other voltages Other lengths, other Ø options. Mounting: Threaded cap, flange or brackets for fixation Special connections: under metal sheath, under beads, 90° C elbow Cartridges with non-heating part or with compensated heating Cartridge with built-in "J" thermocouple...

ASTRA TL is a privately owned company founded in 1991. Our object of activity is the manufacture of spare parts for the chemical and petrochemical industry, petroleum industry, natural gas transportation, distribution of hot and cold water, etc. In our portfolio, you will find products like neck flanges, plate flanges, blind flanges, spectacle blind flanges, and fittings (the manufacturing range o...

...Angle Seat Hand Shut-off Valves for Regulating and Stopping Liquids in Pipelines Type: SV Component Description: Material Housing: PP, PVC, PVDF Sleeve + Seat: PB, PVDF / PTFE O-Rings: EPDM, FPM Connection Type: PP / PVDF with threaded connection and butt welding socket with threaded connection and welding sleeve with flange according to DIN or ANSI PVC...