paint-coat

...The pleated cardboard filter is particularly suitable for filtering overspray in paint and spray booths. The pleated cardboard filter is easy to handle and store, and its lifespan is up to 6 times longer than other filter media (fiberglass), allowing you to achieve significant savings. This filter is also perfectly suited for filtering any wet overspray particles (paint, varnish, gel coat, glue...

...Super washable acrylic paint, breathable and mold-resistant, highly opaque, excellent whiteness, resistant to alkalis and washing, suitable for painting both new and old surfaces such as civil plaster based on gypsum or cement, smooth plastered walls, drywall, wallpaper, wood, and generally non-ferrous substrates. Excellent for repainting. COLOR: White and color chart PACKAGING: Drum 4 - 14 lt USAGE: Interior/Exterior DILUTION: 40% to 55% by volume with clean water • Ready to use with a roller COVERAGE: 12/14 sqm/liter per coat, depending on the absorption of the substrate...

... ALREADY PAINTED WITH SILICATE PAINT Remove any stains and proceed with painting with the siloxane paint. (it is always recommended to apply a coat of siloxane impregnating agent). NEW SUPPORTS Apply a coat of siloxane acrylic fixative diluted from 20 to 60% with water depending on the absorption of the support. OLD SUPPORTS On old supports, remove the old paint by brushing, fill in any...

...Specially treated with refractory properties and great whiteness. Creates after mixing a slightly rough surface with non-slip properties. It has very high adhesion to almost all smooth surfaces, on which, without pre-treatment, it is practically impossible to coat other materials. The surface on which it is applied acquires a rough texture, which resembles high-strength cement mortar. The ratio is ready for every 10Lt of insulation product and no dilution is needed. Only very good agitation to disperse and be fully assimilated. PACKAGE:1 KG...

...WALLFIX AQUA is an undercoat paint or isolation paint for stains; it is odourless and fast drying. Time between coats is very short because of its fast drying time so it is recommend to be used in public areas such as offices, kitchens, hotels, public buildings, etc. Blocks and isolates the stains with the first coat and covers with the second ones.

... rolls, sheets, and shapes. Product type: Slitting, cut-to-length, coil, strip, plate Roll width: 1000 mm - 1200 mm - 1250 mm - 1500 mm Thickness: 0.30 mm - 1.20 mm Quality: DX51-DX52-DX53-D+Z S220-S280-S300 etc. Type of paint: Polyester, PVdF, Plastisol, PVC, Polyurethane...

...Hall Marking for Industrial and Warehouse Halls The hall marking made from liquid hall paint of top quality is a low-solvent two-component high-solid paint based on modified epoxy resins and polyaminoamide hardeners. By optionally applying a clear coat, the hall marking can be additionally protected from dirt caused by forklift traffic.

...The tank is made of metal plate coated with electrostatic paint, which is resistant to corrosion by environmental conditions. It has a revolving pellet feeding port, while its small size makes its installation and movement easy, even in a confined space. Its architecture ensures the proper fuel flow in the boiler, complete emptying of the tank and minimization of the ash. -Polyester Power Coat -Revolving feeding port Capacity (L)Capacity (kg)Dimensions (cm) 310 200 48x94x120 1500 1100 120x100x160...

...Undercoat for floor paint or bonded materials - Impregnation layer for concrete floors. ABBAfix is a gray, single-component primer that serves as an impregnation undercoat for floor paint. ABBAfix can also be used as a dust suppressant and does not need to be covered. ABBAfix is a ready-to-use water-based product. It can be applied with a brush, roller, or airless spray gun in one or more coats at a coverage rate of approximately 4 to 6 m² per liter per coat. ABBAfix helps reduce intervention costs and paint consumption.

...Glossy pigment paint for indoor and outdoor use with excellent adhesion properties, outstanding weather resistance, and very good resistance to water and chemicals. Universal application on various substrates. Excellent insulating effect against wood constituents. 2K-PU multi-coat Glossy W10 White, tintable Special Features Application indoors and outdoors Extreme adhesion Highly durable and chemical-resistant Outstanding weather resistance Application methods Brushing Rolling Cup gun...

...With the most modern equipment, extensive knowledge and years of experience, we offer superior powder coating service. Powder coating is an application of the paint in the form of a powder to the surface of the workpiece or metal. Because it is a so-called dry powder coating, the adhesive is not applied, but rather the coat itself takes its place. Electrostatic gun is used to apply the powder...

...AMROC Color-Primed is the product version used for customized finish painting at the construction site. The product AMROC Color-Primed is ideally suited for applying the finished paint coat to the facade at the construction site. The front facing side and edges are primed in RAL 9010 (white) and the rear facing side is finish coated in RAL 7035 (light grey). The finish coat that is applied at the...

... line process is its flexibility, allowing it to be used with other Thickness: 0.18mm - 2.0mm Surface Treatment: Coated color/galvanized/galvalume Type of Paint: EPOXY, RMP (REGULAR MODIFIED POLYESTER), SMP (SILICON MODIFIED POLYESTER), HDP (HIGH DURABILITY POLYESTER) Surface Finish: Smooth, matte, glossy, textured Paint Coating: Primer 4-8 microns + finish coat 15 to 35 microns...

...Product Features: • Versions without mounting flanges are available in unfinished aluminium or smooth ASA 61 grey powder coat (Hammond colour GY2). • Versions with wall-mounting flanges are available in unfinished aluminium or smooth black powder coat (Hammond colour BK2). • Unpainted aluminium version is protected through manufacturing and shipping with a plastic film cover to ensure a high quality finish. Also doubles as a removable drilling template. • Steel finished in ASA 61 grey baked powder paint (inside and out to prevent rust).

...plasterboards.","PACKAGING":"Plastic bags of 25kg with handle.","TECHNICAL DEFINITION":"Decorative spray-applied coating in ready-to-use paste for interior walls and ceilings. Allows for the correction of surface defects such as blisters and unevenness. Can be applied as a smoothing coat or in a structured relief type \"droplet.\" Specifically designed to eliminate bubbles in concrete and correct flatness defects.","DOCUMENTS TO CONSULT":"DTU 59.1.","COATINGS":"SOLIDECOR. Paint...","TECHNICAL CHARACTERISTICS":"• Bag extract: 72% • Density: 1.85"}...

... occurs. We can coat plate ware as well as ready deformed parts. Considering provision of material we gladly give you any advice needed. We are familiar in using currently known scratch resistant paint systems, like PHC587, AS4000, AS4700 but also recent paints e.g. XH100, MP100. The plastics used are mainly PMMA or PC. Through these coatings the most transparent plates obtain a higher abrasion resistance, an additional uv protection as well as a higher durability against chemicals or an anti-fog-characteristic. Not only in the sectors of mechanical engineering and automotive, but also in medical...

... detail section below. Electro Lacquer Rectifier Prices Promise Savings! Electro lacquer rectifier is a device that allows coating to be applied to metal surfaces. In this method, known as the electroplating method, metal surfaces are coated with paint or lacquer. A special dipping method is applied during application. Thanks to the dipping method, it is possible to coat metal surfaces with different surface indentations and protrusions. This process, which requires expertise, also includes fine details such as correct coating and equal thickness coating.

...Latex paint with silky effect. It has perfect adhesion and easily spreads on the surface, providing little consumption with high application rate. It creates hard coat resistant to intensive repeated washing. It is vapor permeable. It hides effectively micro-cracks of the surface under application. It is easy to apply, makes no runs and doesn't splash during application. It can be tinted manually...

...OEG Offshore Dry Goods Containers are supplied with door cargo nets and door tie back retainers. The base has integrated forklift pockets which provides ease of movement for yard loading and offloading. Our offshore containers are supplied with internal tie down points through out the interior providing strong points to secure cargo. Full offshore paint system blasted SA2.5 + 3 coat system is...

...finished in smart hard wearing textured black powder coat paint and fitted with high quality non marking castors. The trolleys have a storage compartment for loose items such as E ties and tie plates etc. Trolleys will store risers which are smaller than the trolley specification, eg. A 12.450 trolley could also be used to store a mixture of 200 or 300 and 450mm risers, this is particularly useful if you wish to specify a tiered stage which utilises different height risers (Please note that StackaStage kits are supplied complete with necessary trolleys) £320.00–£390.00 ex.

... all types of walls, whether wet or dry, painted or unpainted surfaces. - Excellent adhesion. - Not affected by saltwater and efflorescence. EASY APPLICATION: - Apply in two coats, with the second coat to be applied 24 hours later. CONSUMPTION: - Coverage achievable with 1 can of 1 L ± 2 m² in 2 coats. - Coverage achievable with 1 can of 5 L ± 9 m² in 2 coats.

...In our coating facility, we perform wet coatings. We can produce all RAL colors, DB colors, and also special colors like NCS. Due to manual processing, we can coat small series and individual parts as well. We can easily handle various dimensions up to a size of 5 x 5 x 11 m. If larger workpieces need to be coated, we will find a solution for you.

...Acrylic emulsion-based, water-based interior ceiling paint. It is formulated to have high breathing capability. It has dull and smooth appearance. It has remarkably high coverage power. It does not cause any swelling or flaking.

We are manufacturers and dealers of pure natural marble plasters. We also offer the necessary accessories such as bonding primers, a rich selection of color pigments, high-quality Venetian trowels, and special tools for the creative processing of marble plasters. The following marble plasters are available: Stucco Veneziano - the Glossy, Marmorino - the Silk Matte, Kreativputz - the Versatile, Tra...

... results. At Decorators Doncaster, we pride ourselves on attention to detail, precision, and a commitment to customer satisfaction. With years of experience serving the decorators Doncaster area, we have built a reputation for excellence and reliability. From preparing surfaces to the final coat of paint, our team ensures every project is completed to the highest standard. Our services cover all...

... durability. Application Instructions: - Ensure the surface is clean, dry, and smooth before application. - Apply the first coat of Obiante with a brush or roller. - Allow the surface to dry for 4-6 hours at 23°C. - Apply a second coat to achieve a more even and luxurious finish. - For a refined texture, use a brush or roller in a consistent direction to enhance the paint’s sheen. Drying Time: - Touch dry in 4-6 hours; fully dry within 24 hours under normal conditions.

...ISONEM FLOOR is a solvent free epoxy based, two component, coating material that when cured provides a tough high gloss floor with high chemical and physical resistance. It can be applied in thick layers to protect the metal and concrete surfaces against the chemical and physical outside impacts. USING AREAS: A long lasting coat is used to provide durable floors for a wide range of industrial...

... than 10% synthetic resin to promote quick drying. Washing, dusting, and if necessary, touch-ups with an appropriate coating for the substrate. On oak, chestnut, or other wood with high tannin content, block tannin bleed-through with a coat of matte hard oil and wait 48 hours before applying the Tassili Primer.

...Suitable for indoor surfaces that were painted with Silicate Chalk Paint. Specially made for surfaces exposed to high-stress, such as furnitures, tables, chairs and benches.

... epoxy primer + two coat acrylic paint 2 x Plastic Wheel Chock Plastic Fenders Reflectors and Anti-spray mud laps conforming to European Standards 2 x Plastic Lockable Tool Box 42x42mm Reflectors ...