optical surface inspection

...Optical surface inspection detects minimal defects. This way, you produce your workpieces with consistently high quality.

...Industrial image processing is a module for the automation, capture, and processing of optical information. It serves quality assurance, process monitoring, and timely error detection in the manufacturing process. The following functions can be realized with industrial image processing on parts: • Identification • Position detection • Measurement • Contour inspection • Surface inspection...

... 1,100 degrees hot long products can be analyzed. The measurement results are displayed in real time on the control terminal and thus allow early corrective action to increase throughput and product quality. The surface inspection function automatically detects and classifies deviations in the product surface (peeling, blow-outs, scoring, rolling etc.). In addition, profile cuts of the long product...

...Typical defects to be found: Surface defects like flaws, bulges, scratches - Four QuellTech Q6 3D- laser scanners are installed, mutually displaced by an angle of 90°. In this configuration, they are able to monitor the complete surface of the cable running through. It is important that the test does not lower the production speed, therefore very high sampling rates are required, supported by convenient data processing. The measured position of a defect is recorded in cable direction. ...

... sensor combined with our 2D inspection head to provide the most accurate result. This sensor is the first in the world to apply the Nobel Prize winning physics technology of optical frequency combs. It utilizes coaxial lasers and high precision range finders. There are some cases that our customers reduced over 90% of the inspection time. urthermore, if parts are inspected by humans, there might be different results by each person, because each of them has a different tendency and criterion. ...

...Quality control using optical image recognition systems and sensors is becoming increasingly important in various application areas. This includes, among other things, automated quality assurance as well as measurement and testing technology. Automatic optical inspection is used whenever processes with different basic requirements need to be automated. We integrate various camera systems into...

LLA Instruments GmbH & Co. KG (LLA) has been developing and producing analytical measurement technology for imaging evaluation in processes for over 25 years. LLA's NIR spectrometers are used worldwide for the analysis and sorting of material flows, such as the separation of plastics or paper. Key tasks, such as the identification of PVC in PET flake sorting and the detection of contaminants in pa...

... optical quality inspection can be fully automated. Whether it involves presence detection, surface inspection, measurement, positioning, code verification, or text inspection, the operator always works with the same familiar software environment. A key advantage of the software is its interactive 'point and click' programming. Inspection programs can be created without typing in source code. This makes the software highly practical.

... and testing facilities: - Camera systems including image processing: part recognition, position determination, color and surface inspection, damage image detection - Optical, tactile, and ultrasonic testing of sensors and displacement measurement systems - Pressure and density testing - Level control and level monitoring - Rotational properties and roundness accuracy - Measurement of tooth flank...

...Only metals of the highest quality are processed as raw materials to ensure absolute alloy purity. Bedra achieves flawless surface quality for its optical wires, for example, through high-performance rolling – state-of-the-art facilities that avoid over-rolling. State-of-the-art annealing systems gently relax the metal after forming without leaving marks on the surface. Each subsequent processing stage is followed by extensive inspection of the wire surface to meet the high standards of bedra's optical quality.

...Finest quality surface polishing is vital in plane optic production. At Befort, this has top priority from production all the way to final inspection. Thanks to sophisticated CNC technology, we are able to produce single planeoptic components as well as multifunctional systems. We process optical glass, filter glass, quartz glass and float glass up to a size of 600 mm diameter. We make filters...

... cleanliness: up to scratch-dig 10-5 Centering precision up to 30 arcsec Rms < 0,5 nm Final inspection with OWI 150 XT and AZP2 from Opto Tech Materials: All optical glass from SCHOTT, OHARA, CDGM and SUMITA Crystals Quarts other material on request...

...For the steel and aluminum industry, Micro-Epsilon offers innovative measuring and inspection systems for thickness, profile and surface measurements. Performance and quality, as well as reliability of products and services have made Micro-Epsilon one of the leading suppliers of inspection systems for optical thickness measurement used in the metals industry. Our non-contact thickness measuring...

...Optical Particle Measurement in the Range of 1nm - 400µm https://www.soliton-gmbh.de/de/produkte/analytik-und-prozesstechnik/partikelmessung-optisch With the portable surface measurement devices from 4D Technologies, inspection tasks can be carried out quickly and with minimal training on-site. Although the system was developed in collaboration with General Electric for the MRO sector...

...The ProMapper is the A&R table-top solution to provide state-of-the-art optical inspection according to the industry standards (ISO/ANSI), totally independent from the operator. In addition, it supplies freeform surface evaluation based on the A&R Error Map technology, making sure that no surface defect is shipped to the customer. Based on the Error Map, surface quality features like the GMC...

...Integrated motorized magnification and illumination shift to check the active surface of optical fiber glas connectors for defects.

...LED Light Panels for illuminating surfaces for optical inspection systems...

...The new standard in quality inspection With our contactless, area-based measurement system for high-resolution optical 3D surface measurement in the micro and nano range, we offer our customers the choice of a measurement protocol or the delivery of digitized 3D data.

... chemical analysis right at your workspace. Determine the composition of what you have visually identified within seconds. Use LIBS to perform advanced material analysis 90% faster compared to inspection with SEM/EDS. Surface contamination or coatings can also be easily removed. Chemical mapping and micro-drilling are further analytical steps.

...iCAM camera systems are optimally designed for optical quality control on packaging machines. The type of printed material is almost irrelevant in this context. Laetus iCAM camera systems are optimally designed for optical quality control on packaging machines. The type of printed material is almost irrelevant in this context. Materials with a wide range of surface properties are ideally suited...

... Engineering Compared to other optical systems, we can capture very large point clouds in the shortest time and with the highest accuracy (up to 5 MP in 2 seconds). Areas of application: • Quality control / Inspection • Tool and mold making • Design • Rapid Manufacturing • Reverse Engineering • Archaeology, capturing art-historical objects • Generally materials that are difficult or impossible to touch tactilely...

...The entire additive value chain can be represented in-house. From material analysis to design and manufacturing, as well as post-processing and tactile and optical quality inspection. Additionally, the surface can be tested for cracks, pores, or overlaps using non-destructive testing. This process meets the requirements of NADCAP. The quality of the results is convincing – even the high standards...

...In the area of PCB assembly, KUK Group offers SMD and THT assembly lines, where we manufacture according to the customers' requirements. For quality inspection, we use automated optical inspection systems (AOI), an X-ray machine and manual optical inspection. KUK Group assembles printed circuit boards that are used in a wide variety of applications. As a purely customer-specific manufacturing...

...Telecentric lighting, parallel beam path; Homogeneous light field; Flashable via flash controller Flashable telecentric LED lighting - parallel directed (collimated) beam path for flashing during the inspection of moving objects for optical measurement technology to specifically highlight edges and surface structures in transmitted and reflected light; for the detection of inclusions and defects...

... as well as complex components with deep cavities or very fine edges, such as blades or turbines, can be measured. The number of individual scans is also reduced since we obtain more information from each scan, thereby decreasing measurement time regardless of size, surface, finish, geometry, and ambient light conditions. HIGH-SPEED INSPECTION WITH LOW NOISE LEVEL The ATOS 5 series of industrial optical 3D scanners provides precise scans with detailed resolution at high speeds.

... inspection results are available as soon as the parts leave the inspection cell, which occupies only 1 square meter, and defective parts are sorted out. Depending on the component, inspections of up to 120 parts per minute are possible during the pressing cycle. Unlike conventional optical 360° inspections, the ORBITER600 can handle reflective or matte surfaces, or even combinations of both.

...Systems for surface and quality inspection. Inspection combines optical and eddy current methods for wire at 100m/s and 1100 degrees. Applications in pipe production and parts manufacturing. Highest precision and accuracy of eddy current systems (HOTdiscover, ROTOdiscover, ENDiscover, WELdiscover, DEFdiscover, and MATdiscover) to meet quality standards and leverage the well-known advantages of...

...The Viking 3D profilometer is ideal as a tabletop device for optical 3D inspection and measurement of thin films. The Viking 3D measuring device is perfect as a tabletop unit for optical 3D inspection. It utilizes state-of-the-art sensors and technologies to enable rapid 3D measurement of topographies and surface roughness.

...We can perform the following surface treatments using the vibratory finishing process for you: deburring, polishing, matting, grinding, and rounding. In our warehouse, we keep all common grinding bodies in stock. This means that the manufactured parts will be available for further processing in no time. High-precision manufactured parts are deburred by hand at Uyar and subsequently subjected to a thorough optical inspection.

The ATENSOR serves as the competence center for robotics and robotic measurement technology. Integrated system solutions for automation and quality assurance are utilized in industrial environments. Among the most innovative developments are a system for the automatic measurement and processing of parts with robots, as well as a system for surface inspection of painted parts, which significantly contributes to quality assurance.