Results for

Manufacturer Producer - Waste water treatment systems for industry

104 Companies

11 Products

OVIVO DEUTSCHLAND GMBH

Germany

Ovivo is a global company with offices in 15 countries and five continents and is solely dedicated to treating water and waste water. As real water specialists, we understand the complexity of water and the day-to-day reality for our customers. We are driven not only by the global aspects of tried-and-tested practices, we are also proud to challenge standards! Our well-established technologies, unmatched experience and corporate culture enable us to realise first-rate projects all over the world. We are specialists in planning, constructing and maintaining the following facilities: Ion exchanger plants, complete desalination plants, turnkey plants, waste water treatments and decontamination. We also specialise in water management, water recycling, recovering resources, servicing and maintaining waste water treatment plants (WTTP), and, in particular, eliminating heavy metals.

Website
DEPROZESS

Germany

Prozess & Umwelt Systeme GmbH has been established in Bremen, Germany. The main activity of Prozess & Umwelt Systeme GmbH is providing process equipment, environment protection, water and waste water treatment solutions and systems for industries and municipalities.Prozess & Umwelt Systeme GmbH’s Products and Services are: Water Treatment EquipmentRO ( Reverse Osmosis System)Ultra Pure Water Package UF ( Ultra Filtration System)EDI ( Electro Deionization System)CPP (Condensate Polishing Plant)Waste Water Treatment EquipmentSewage Treatment PackagePaint Removing - Clarifying PackageOily Water PackageMBR PackageGrease TrapDisinfection SystemElectro Chlorination PackageUV ( Ultraviolet ) SystemOzonation PackageProcess EquipmentOil separatorsRefrigeration and Dehydration systemsFuel gas heater packagesFiltration Equipment3 Phase separatorWell test separator and equipmentChemical dosing packagesFresh water makerH2 & O2 PackagesEngineeringLicensingTrainingCommissioningRevampingMaintenance
SFA ENVIRO

France

SFA ENVIRO (AQUATURBO & EUROPELEC), manufacturer of specialist wastewater treatment equipment, develops and sells a wide range of equipment for the treatment of municipal and industrial effluent worldwide, predominantly under its two historical brand names: AQUATURBO and EUROPELEC. SFA Enviro offers a wide range of constantly updated equipment, including: - slow or rapid surface and underwater turbines, - fine and medium bubble aeration ramps, - mixers / agitators, - system to eliminate foam and floating matter, - floating spillways, - spillways for SBR. Our R&D teams ensure we offer optimal quality in all our products and services. We have our own in-house test basin where we can evaluate the performance of all our systems to ensure they meet the technical standards we guarantee. Our technicians offer tailored, personalised support to every client at every stage of a project, from design to commissioning, to make sure their precise needs and requirements are followed every step of the way: - project technical management and oversight, - expert consultancy for the installation of all types of equipment in relation to technical and regulatory constraints, - leasing and maintenance services for our aeration solutions. We provide a comprehensive service that cements our company's reputation on a daily basis.

All the products for "waste water treatment systems for industry"

MIX SL - Aquaturbo

MIX GS - Aquaturbo

MIX AS - Aquaturbo

FRMD - Aquaturbo

FRED - Aquaturbo

Website See all products
KMU LOFT CLEANWATER SE

Germany

KMU LOFT Cleanwater SE is the professional and reliable partner of the water treatment industry – worldwide. From initial analysis and design to installation and commissioning, our industry experts, engineers and chemists are here to help you every step of the way. We have been designing and producing KMU LOFT vacuum evaporators as efficient solutions for waste water treatment since 1989. Currently, over 2400 of our vacuum evaporators are treating waste water all over the world, 24/7. Our evaporators recover up to 98% reusable high-quality distillate, allowing our customers from a wide variety of sectors to treat their waste water efficiently and safely. Using vacuum evaporators helps not only to reuse treated waste water as a resource, but also minimises costs, since you can recover and reuse valuable by-products from your waste water.

Website
FLUIDTEC FLÜSSIGKEITSTECHNOLOGIE JAN PETER KIEL

Germany

FLUIDTEC offers various technologies for water treatment and pump technology. FLUIDTEC has made it its business to design technical solutions for water treatment and water pumping for its customers ecologically and economically. Sustainability as well as the quality of our products and services are everyday requirements that the customer strives for when considering the environment and economy. Our product range consists of: Complete technical systems for processing water and other liquids. System components for water and liquid treatment. Consumables for water and/or liquid treatment.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

MITA WATER TECHNOLOGIES

Italy

The product's lowest life cycle cost for the wastewater treatment. We help engineering departments and contractors to choose the best solutions for all the municipal wastewater treatment phases and for all the industrial sectors: free-fibre cloth filters, biodiscs for biological treatments, Biocombi compact plants for small communities, lamella pack oil-removers and decanters, dissolved air flotation systems, pre-sales and after-sales service: pilot-tests, startup and testing service, maintenance, revamping. MITA produces and trades polar fleece cloth filter for tertiary filtration which is a very high yield solution thanks to its deep filtration. Our key figures: 3, 300, 000+ m2 of installed biorulli, i.e over 1, 570 units, 2, 000+ lamella pack systems for clarification and oil removal systems, 800+ cloth filters installed, 50+ years of experience in wastewater treatment

All the products for "waste water treatment systems for industry"

Pile Cloth Media Filters - Disc series (PEC – PEC VM)

Lamella Clarifiers Flowpack - Frame F

Biodiscs - Biorotors B 240

Biodiscs - Biorotors B 290

Compact Plant Biocombi© - Package Units BC 2

Website See all products
BASE GROUP SP Z O.O.

Poland

Base Group is a family company that has been a leading manufacturer of industrial machinery and high quality welded metal structures for nearly 30 years. 90% of the company sales are effected to foreign customers in the energy, marine and chemical industries, mainly in Scandinavia. Base Group is a leader in the development of state-of-the-art metalworking technologies that have been granted patent protection. Advanced methods of metal production are developed in cooperation with the leading scientific institutions in Poland. In the years 2014-2018, the company allocated over PLN 15 million , i.e. 8% of its revenue, to finance investment projects. As part of Industry 4.0, the company has implemented an IT system for welding control as the only one in Poland.The Company attaches great importance to the proper selection of employees and their professional development. Base Group is a true trendsetter in its industry. It offers its customers a unique technology and organisation of production, a motivated team of employees and efficiently implemented state-of-the-art company management tools. In recent years, the company's revenues have been growing faster than in the industry in general.

All the products for "waste water treatment systems for industry"

reactor, offshore constructions

Website See all products
FLOTTWEG SE

Germany

Flottweg is one of the worldwide leading solution providers in the field of mechanical separation technology. Our decanters, disc stack centrifuges and belt presses exclusively manufactured in Germany are the preconditions for high efficiency in production and outstanding quality of our customers’ end products. In the petrochemical, chemical, pharmazeutical and the food industry but also in the field of mining as well as in the environmental area for the treatment of waste water or oil sludges – Flottweg’s premium products and systems work successfully everywhere. Thousands of satisfied customers all around the world are our best reference. For more than 60 years Flottweg have been developing and producing decanter centrifuges, separators, belt presses, and systems considered extremely powerful and reliable. In many industrial areas, they handle key functions in the clarification of liquids, separation of liquid mixtures, and concentrating and dewatering.

All the products for "waste water treatment systems for industry"

C2E Decanter Centrifuge

C7E Decanter Centrifuge

C8E Decanter Centrifuge

X4E Decanter centrifuge

X7E decanter centrifuge

Website See all products
CHRISTIAN STÖHR GMBH & CO. KG

Germany

With more than 50 years of experience in plastic processing, we produce our Hel-X fillers for biological waste water and gas treatment and for use in aquaculture. You can build on this wealth of experience as the basis for high-quality Hel-X fillers made of plastic. We manufacture exclusively at our site in Germany using a method that we developed ourselves, in strict compliance with high quality and environmental standards. Our Hel-x fillers are easy-to-use, highly effective and offer low investment costs and running costs, making them not only an ecological choice but economical too. Hel-x fillers are used all around the world to treat municipal and industrial wastewater in MBBR and IFAS systems. They are also used by many customers in aquaculture and biogas plants.

All the products for "waste water treatment systems for industry"

HXF12KLL Bio Carrier

HXF13KLL+ Bio Carrier

HXF14KLL Biocarrier

HXF17KLL Biocarrier

HX38 Rods

Website See all products
SCHRADER APPARATEBAU GMBH

Germany

Schrader was founded in 1969 in Münsterland. Today, Schrader comprises the departments of process technology, fluid technology, E&S and equipment manufacture and works all over the world with our collected markets. Schrader Verfahrenstechnik supplies turnkey installations and is your partner for high-quality production systems in the food & pharmaceutical industry. Schrader Verfahrenstechnik is also a reliable partner when it comes to waste water treatment and reclamation using evaporation processes which generate steam. Schrader Fluid Technology is an independent specialist for tailored supply and application systems for paint, sealing materials and adhesives in the automotive industry. Schrader Engineering & Service offers servicing, maintenance and spare parts worldwide. Schrader Apparatebau possesses highly sophisticated machinery for manufacturing cutting edge equipment. Our employees' extensive expertise guarantees welding applications and processing of the highest quality.

Website

FLUX-GERÄTE GMBH

Germany

Today, the name FLUX is seen as a hallmark for top class pump technologies worldwide. Yet it all began in 1950 with the invention of the first electric barrel pump. Now FLUX has a wide customisable product range. FLUX pumps are used, for example, in the chemical and pharmaceutical industry, in machine and system manufacturing as well as by companies in the electroplating technology, waste water treatment and food processing industries. Whether as an individual solution or a system solution, FLUX quality means long service lives, excellent cost-efficiency and the highest degree of safety. Alongside exceptional FLUX product quality and reliability, our customers value the outstanding technical competence and customer focus of our staff. Today, FLUX-GERÄTE GMBH supplies pumps in almost 100 countries across the world.

Website See all products
KMC GLOBAL EUROPE SP. Z O. O.

Poland

KMC Global Europe - we are the European branch of the American company KMC Global. Our customers are companies in industries such as food, chemicals, automotive, aerospace, mineral processing, industrial manufacturing, agriculture, foundry, metal recycling and energy. We help our partners optimize production and reduce waste. To achieve this, we manufacture: - conveyors - material screens - metal crushers - big-bag loading and unloading equipment - coolant recovery and filtration equipment - wastewater and post-process water treatment equipment. KMC Global Europe Ltd. is a group of brands including: HAPMAN - dust-free transport of powders and bulk materials over long distances, free storage systems PRAB - Metal chip and coolant management systems, metal scrap conveyors OVIBRA - screening and vibratory transport of bulk and chunk materials. The companies are built on a foundation of continuous improvement process, in accordance with Kaizen methods and Lean Manufacturing principles. They provide a strong operational foundation that enables leaders to shape the vision and stability of the brands. Corporate culture is driven by leaders guided by principles of trust and integrity. Brands within the KMC Global group offer complementary equipment and services. Partnerships within the group yield enhanced engineering and manufacturing capabilities and lead to advances in equipment technology.

Website See all products

YALCIN GROUP

Turkey

Established in 1987, Yalcin Group embarked on its journey as one of Turkey's first electroplating additives dealers. With a rich history spanning over three decades, we have consistently been at the forefront of pioneering electroplating solutions in Turkey and beyond. Manufacturing plating plants and rectifiers since 2006, our commitment to innovation has led us to establish two distinguished brands within our group: Alphatech, specializing in a wide array of products ranging from plant production to tumbler cabinet baths, and Alphaworld, focusing on the manufacturing of premium-quality plating rectifiers, battery charging rectifiers, and more. Our flagship products include: •Plant production equipment •Coating baths •Ventilation systems •Facility accessories We have forged a robust presence across diverse industries, catering to esteemed clients such as Turkish Airlines, Aselsan, Autoliv, and Ford. From aviation and telecommunications to automotive and decorative plating, our expertise spans a wide spectrum of applications. We take pride in our Turkish-German partnership for technology, which serves as the cornerstone of our operations. Our goal is to provide comprehensive electroplating solutions, from plant construction to waste water treatment and tailored chemicals. We offer full-service support from project planning to production, ensuring a seamless experience for our clients. Contact us for more information!

Website See all products
APLAST D.O.O.

Slovenia

We are one of the leading companies for moulding plastic masses (rotomoulding) in Slovenia and its direct vicinity. Our basic task is a development of high-quality plastic products that contribute to maintenance of a healthy planet, environment and raising the quality of life. We are building the position of one of the leading plastics transformation companies in Central and Eastern Europe. We achieve this by actively penetrating the wider European market for the past 20 years and maintaining the advantage we have in existing markets. All products are the result of our own development department, which combines all the necessary expertise, from design and construction to product implementation. In addition to the standard program, we are a development partner and supplier to various industries. We carry out numerous projects for our clients as well as the production and finishing of products and semi-finished products for larger companies. Our main product groups are: AQUAstay tanks for for rainwater, drinking water and waste water; sewer inspection chambers; water meter shafts; cable chambers, wastewater treatment systems; septic tanks; AQUAoil oil and grease separators; AQUAway stormwater infiltration systems; ECOdip underground waste collection containers; tanks for mobile vans (Caravan program); dredging systems… A certification mark of Bureau Veritas Certification provides us with a seal of commitment to excellence, sustainability and reliability on international level.

See all products
FDT SRL DEPURATORI D'ACQUA

Italy

fdt srl, leader in the water treatment plants since 1967, manufactures and markets systems of water treatment in industrial use and assists directly the customer both during the realisation of the plant production, and after longer use of it through its own technical experts, means and laboratory. fdt srl . has design offices, factory and warehouse on an area of 6000 square meters. realizing at its location all technological parts of the most sophisticated systems, including testing. fdt srl, ISO 9001 certified, has the objective to always improve the quality of the customer service: for this reason fdt Ltd. has decided to implement a quality management system of its internal processes conform to a model recognized at national and international level. Offer Portfolio fdt srl specializes in the design and supply of water treatment plants: primary water (purification, softening, carbon filtration, sand filtration, reverse osmosis desalination) waste water containing any type of pollutant (Biological purification Plants at total oxidation process or at MBR membranes process , installations for water treatment containing hardly biodegradable compounds, high COD content or metal content, oil removal installations) Applies its own knowledge on fluids in general Provides molecular separation technologies without altering or adulterate the treated product. Select innovative research and builds on their own pilot plants in semi-industrial scale.

All the products for "waste water treatment systems for industry"

Filters cyclone-type

EDI

See all products
SOLARSPRING GMBH MEMBRANE SOLUTIONS

Germany

When traditional water treatment methods reach their limits or process fluid disposal becomes uneconomical, we put to use our membrane distillation technology. Through the use of waste heat or renewable energies, we can improve the CO2 balance of your company. We offer complete solutions for industrial waste water treatment. Our products are used in the metallurgical industry in the field of printed circuit technology, or in research. For drinking water treatment, we use our solar-powered MBS systems, which produce crystal-clear water through up to five treatment stages. Since 2009, SolarSpring GmbH, membrane solutions, has become a world-leading membrane distillation specialist. We don't just believe in the importance of water; we work together with regional suppliers and are committed to a purposeful company structure.

All the products for "waste water treatment systems for industry"

MBS-Standard

rEvap

MBS-Outdoor

MBS-Wall-Mounted

MDLab

See all products
DOSATRONIC GMBH

Germany

Welcome to DOSATRONIC GmbH Measuring | Regulating | Dosing | Disinfecting We have been developing, producing and selling high-quality products and systems in the field of water treatment, waste water treatment, process water, drinking water, swimming pool water and environmental engineering worldwide for nearly 15 years. We specialise in the following areas: Water treatment, waste water treatment, plant manufacturing, chemical industry, beverage industry, swimming pool technology, hospital technology, fish farming, farming, electroplating, surface technology, measuring and control devices, pH and redox electrodes, measuring cells for conductivity, turbidity, temperature electrochemical sensors, as well as chlorine, chlorine dioxide, ozone, hydrogen peroxide, peracetic acid, oxygen dosing pumps, complete dosing systems, disinfection systems such as chlorine dioxide systems, UV systems and swimming pool technology
HEIN CHEMISCHE VERFAHRENSTECHNIK GMBH

Germany

We have been active on the market since 1995 and boast many years of experience and top expertise. We only use products which have been developed and manufactured in-house. Our top-quality products and processes are reliable and reproducible. Together with our qualified employees, we specialise exclusively in water treatment products and chemical oxygen demand (COD) in waste waster from the food industry – but it's something weein do perfectly. What we offer you: Our products have been developed and optimised based on practical use. Our solution concepts are based on the analysis of water probes and the data determined from these. We will eliminate your waste water problems in a targeted manner and with comparably low quantities. Our greatest strength is diagnosing problems and specifically selecting the right product. We also supply dosing technology and compete water treatment systems in any dimension. Oxygen depletion – oxygen reduction for waste water from dairy, slaughterhouse, cheese dairy, leather industry, edible oil production such as olive oil and palm oil
FEEDWATER LTD

United Kingdom

Feedwater Ltd is the leading manufacturer and supplier of a range of water treatment chemicals and equipment, such as water softeners, for industrial and commercial applications. Feedwater ltd specialise in boiler and cooling water treatment, legionella control and prevention of Legionnaires disease using chlorine dioxide to treat effluent and waste water. Their extensive product range is supported by on-site service in order to ensure that their customers systems run safely and efficiently. For a long time Feedwater Limited has been associated with the supply of quality products and services into the industrial and domestic water treatment sectors, and they are well respected as an industry leader in the UK, having built up a reputation based on technical excellence for over 35 years. They are experienced exporters with over 25 years of experience, and over recent years we have been working very hard with our expanding network of reputable overseas distributors and agents.
BOSMAN WATERMANAGEMENT GMBH

Germany

Bosman Watermanagement GmbH is a medium-sized company in Berlin and part of the Bosman Watermanagement Group, which supplies systems for water and wastewater treatment and pumping stations throughout Europe. We specialise in manufacturing and supplying filters of maximum efficiency that can be used flexibly and universally for purifying all kinds of untreated water, service water, process water and (industrial) wastewater. Turbidities, particles and suspended substances are reliably removed. For the field of waste water treatment in particular, we supply filter systems for eliminating trace substances and phosphorus so as to achieve extremely low effluent concentrations. Our filtration systems are custom-designed for the requirements of our customers. They will impress you with the highest quality, minimum space requirements, durability, innovative design and resource-conserving operation. We consequently offer solutions for all filtration tasks. With our mobile test facilities, we can show quickly and flexibly on site how an optimum effluent quality of the filtrate can be achieved, and convince you of the performance of our Flexbed Filter. We look forward to hearing from you!

ABS WATER TREATMENT TECHNOLOGIES

Turkey

We, ABS water treatment technologies are one of the leaders in water treatment system providers.ABS treats all kind of water (river/sea water, tap, lake, barrage, surface, ground, well water and waste water) according to the customer needs and with no capacity limits just to insure the customer a pure drinkable water.We apply high technologies to deliver the pure water for many product lines i.e. Villas, apartments, buildings, hotels, complete town-city water, water filling industries, textile, cosmetics, hospitals, dairy industry, general food sector, beverage industry, olive oil industry…etc.
SILCOMS CONVEYOR CHAINS

United Kingdom

SILCOMS manufacture high-quality conveyor chain systems and components for all markets: Agriculture, Automotive Industry, Chemical Industry, Paper Industry, Steel Industry and Aerospace. We have over 50 years experience in conveyor chain systems: Agricultural Conveyor Chains, Automotive Conveyor Chains, Bakery Conveyor Chains, Bespoke Engineered Chain, Cereal Dryer Chains, Escalator Conveyor Chains, Quarry Equipment Chains, Recycling Equipment Chains, Self Stacking Spiral Belt Freezer / Cooler Drive Systems, Shafts, Sprockets & Ancillary Components, Waste Water Treatment Plant Chains.
INTEC ENGINEERING GMBH

Germany

INTEC Engineering GmbH is an international company recognized for excellence in the design, manufacturing and delivery of energy systems. INTEC plants represent state-of-the-art technology. INTEC energy plants universally use thermal oil as the heat transfer medium. Thermal oil boasts significant advantages compared to steam or hot water, particularly that it can be heated at atmospheric pressure up to temperatures of over 300°C with mineral oils, or 400°C with synthetic oils. Thermal oil is consequently the predominant medium used in the supply of process energy for a majority of industrial processes. INTEC energy plants supply process heat for various industries. Core components like coils, waste heat boilers, secondary control loops etc. are manufactured and assembled through our subsidiary INTEC Rohrtechnik GmbH in Bruchsal, Germany which guarantees fast and flexible solutions to customer needs. INTEC possesses the experience and the technologies for the innovative thermal treatment, disposal and economic use of biogenic, contaminated sludges and residues. The innovative disposal and utilisation concept is based on a combination of the contact drying technology with INTEC solid fuel firing plants and process heat generation plants. The contact dryer is a leading technology for drying, hygienising and increasing the calorific value of domestic and industrial sewage sludges. The contact drying therefore complements the INTEC solid fuel firing methods.
AGT SU ARITMA TEKNOLOJİLERİ

Turkey

Our company specializes in industrial purification and conditioning. We carry out turnkey projects and applications in the field of process water treatment, waste water treatment and recovery, design and installation of water facilities, drinking and utility water preparation systems. It carries out international and domestic projects meticulously with its expert engineer staff, technical service and manufacturing team. Our company, acting with the awareness of this issue, has gained a great momentum in a very short time by combining the most advanced technologies with the right engineering service since its establishment in 2018, and has taken its place among the leading companies of the sector. In line with the entrepreneurial management team, experienced engineer staff and the participation of all employees, we aim to provide quality products and services to our customers and continuous development. In addition, we develop innovative solutions to implement all our services efficiently and creatively, while respecting nature and people as a priority social responsibility. We continue our services and activities in order to “create a sustainable world, a life where future generations can live safely”, which is among the principles of environmental awareness. It is among our priorities to protect natural water resources, to support their development and most importantly to add value to the environment by conscious consumption
APSL SYSTEMS LTD

United Kingdom

APSL Systems Limited (APSL) is a global supplier of Oil, Gas, Produced Water and Sea Water process equipment solutions to the Oil, Gas, Refining and Petrochemicals Industries. We pride ourselves on the principles of developing and delivering innovative processes and exceptional products together with a professional and responsive service to our clients. Our engineering expertise and experience accumulated over more than 25 years of service to clients, allows us to provide solutions for a diverse range of applications. Our products include but are not limited to; PRODUCED & WASTE WATER TREATMENT - Plate Separators (CPIs and PPIs) - High Performance Liquid/Liquid Hydrocyclones - Desanding Hydrocyclones - Induced Gas Flotation Units - Compact Flotation Units - Deep Bed Nutshell Filters - Produced Water Coalescers - Cartridge Filters / Bag Filters - PW Automatic Backwashing Filters - Solids Hydro-transport Units - Sand Flushing and Washing Systems - Skim Piles and Caissons SEA WATER TREATMENT - Automatic Backwashing Strainers - Dual/Multi-media Fine Filters - Vacuum and Gas Strip Deaerators - Cartridge Filters / Bag Filters - Compact Automatic Backwashing Fine Filters MULTI-PHASE AND CRUDE OIL TREATING - Wellhead Proppant and Sand Removal Hydrocyclones - 2 and 3 Phase Separators FWKO Vessels - Process Heating GAS - Fuel Gas Systems - Gas Filters Our focus is on customer satisfaction by providing a responsive service that meets the changing needs of our customers.
ASMERT MEZBAHA GIDA VE TARIM URUNLERI SANAYI TIC.LTD.STI

Turkey

ASMERT in 2000 in Izmir that industry country and the world food shortages and technological innovations to be done to eliminate these shortcomings in order to realize their own principles, designed to increase the efficiency, economy and hygiene conditions in the foreground has been established with an idea. Founder and owners of the company, which is specialized in the food industry Architect Salih ERGENE and Architect Yusuf Mert ERGENE are. Owners of the company has 33 years of project experience. Partners and employees in this sector since the 1980s has served Turkey's leading food companies. As the sector Asmert knows how important his work and human health, environmental awareness, working in adhering to universal values. Therefore, at the beginning of the work produces healthy projects. Besihanelerden, slaughterhouses, meat processing packaging, cold chain and waste water treatment systems until it reaches the project is considered as a whole.
KROMAS MACHINE

Turkey

Kromas products are successfully used in more than 10.000 companies in 81 countries in 5 continents.More than 3000 surface finishing processes developed by Kromas are being successfully implemented, without alternatives.- Round Vibratory Machines- Multichannel Continuous Finishing Systems- Trough/Tub Vibratory Machines- Linear Tub Vibratory Machines- Vibratory and Belt Drying Machines- Centrifugal Disc Finishing Machines- Centrifugal Drying and Degreasing Machines- Surface Finishing Barrels- Surface Finishing Automation Systems- Industrial Waste Water Treatment and Recycling Systems
UAB DUGRITUS

Lithuania

UAB Dugritus has been specializing in the production of technological equipment, installation and production of outdoor heating networks and other industrial and energy pipelines since 2017. The company complies with the implemented management system in accordance with the requirements of ISO 9001: 2015, ISO 14001: 2015, ISO 45001: 2018 standards. Welding processes meet the quality requirements of ISO 3834-2: 2006, the standard. Manufacture of gas, oil, food, chemical, pharmaceutical, water treatment, hydrogen production pipelines. Manufacture of pressure equipment for biofuel boilers, waste incineration plants and other industrial and energy pipelines. Manufacture of outdoor heating networks, gas and oil pipelines. If you only have a project and don't have one, please contact us and we will be happy to help you. Our goal is to show ourselves as a quality company and able to provide you with good results.
POLYDUCT ZRT.

Hungary

Philosophy of our experts: „Limitation of using rotation plastic moulding is where the limitation of imagination is.” That philosophy underlies our work at Polyduct and we are seeking to see Polyduct products serving all possible purposes. Based on the kinds of our products three separated business lines are operating within Polyduct: Urbanization Our urbanization unit is working for the creation and maintenance of livable and friendly environment in settlements. Using environmental waste treatment systems enables us to decrease load on was Water industry We offer solutions and techniques for quality drinking water networks, sewage collection, treatment and cleaning systems. Products and services are available for households, communities, settlements, hotels, municipalities, industrial sites, etc. Our water industry business line include different kinds of waterflow meter manhole, public utility control mainholes and community and unique sewage treatment systems.
RIELLI

Turkey

We produce Reverse Osmosis Plants, Waste Water Treatment Plants, MBR and Ultrafiltration Plants, Gray Water Recycling Plants. We work according to our customers specific Project with informations of capacity and water analysis. If you have any Project we will be glad to make an offer for you. We can serve all over the world. Rielli Water Treatment Systems Established in 1993, our company offers engineering and contracting business services in environmental industry under the Rielli brand, particularly in the field of water, wastewater treatment and recycling. Offering profit generating relations, innovative products and environmentally-friendly concept, without compromising its self-devotion and passion, our company has become one of the leading businesses in the industry. Being aware of the position we hold and of the responsibilities we assume, we have been operating with the aim of raising the standards in the sector. Further, we have always paid utmost attention to the maintenance of an important principle as we here would like to repeat: “We offer such products that generate profit for our customers, that are innovative and are always environmentally-friendly.” Throughout the passing years, we have not kept our principles only on paper, but obtained the following certificates from the respective competent authorities, through which we have proved the importance we pay to our business and, the quality of our products.