Results for

Manufacturer Producer - Upgrading of electrical systems

55 Companies

16 Products

EDIL ARTISTICA - RISTRUTTURAZIONE BAGNO A ROMA

Italy

The company EDIL ARTISTICA - RISTRUTTURAZIONE BAGNO A ROMA, is a Manufacturer/ Producer, which operates in the Restoration and renovation - contractors industry. It also operates in the bathrooms remodelled, minor building renovation jobs, and upgrading of electrical systems industries. It is based in Roma, Italy.
KYTALI MULTISERVICE

Italy

The company KYTALI MULTISERVICE, is a Manufacturer/ Producer, which operates in the Construction - Finishings industry. It also operates in the building - renovations, painting of buildings, heat insulation, and upgrading of electrical systems industries. It is based in Gravellona Toce, Italy.
CSI - CHAUDELEC SYSTEMES INDUSTRIELS

France

CSI specializes in the design, manufacture, assembly and start-up/tune-up of electric or gas IR (Infra Red), UV (Ultra Violet) and EB (ELECTRON BEAM) systems. We also offer upgrades for existing equipment. We offer our services mainly to the following sectors: AUTOMOTIVE PAINTING, FOOD, COIL COATING, ADHESIVES, TECHNICAL CONCRETE. In AUTOMOTIVE, our installations range from hand-held IR cassettes to Infrared industrial oven, from curing system steps to touch-up installations on rollers or overhead rails. In the FOOD sector, our systems enable browning, roasting, melting, pasteurization before or during packaging, and drying of water or coatings. In COIL COATING, our high-density electric IR units (up to 700kW/m²) polymerize paints in less than 10 seconds, and dry treatments in 1 to 2 seconds. As the range of applications is very broad, we recommend that you visit our website or write / call us for further information.

Website
SPRINT ELECTRIC

United Kingdom

About Sprint Electric. DC Motor Control Technology: Increase your productivity, save energy and reduce down time.With an extensive range of DC motor control products, you will find an answer to your industrial automation questions. Increase your productivity, save energy and reduce your down time.Your Industry - Our Experience.We’ve used our renowned industrial automation experience to design a range of DC motor controllers, which provide you with solutions to the most demanding motor control applications.It’s now easier than ever to design new DC motor control systems or improve the performance of an existing application by retrofitting with the latest DC technology.Save With Compact Designs And Ex-Stock Delivery.You can save cabinet space in new control systems, or easily upgrade an existing DC motor application. Compact design comes as standard.Reduce your downtime by relying on our ex-stock delivery.
COOLTECH FINLAND OY

Finland

For almost 15 years COOLTECH company successfully produces, supplies and performs service works of industrial compressor machinery and refrigeration equipment (compressor units, chillers, plate freezers, pump circulation stations, vessels, control and power boards etc). The product range includes all kinds of key components and spare parts of industrial refrigeration systems. At our production plants we also produce repair works, upgrade and retrofit of defective or used equipment with the replacement of compressors, electric motors and other components of refrigeration machines and units.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

WILHELM HORMES ING. GMBH & CO. KG

Germany

Hormes - notion in motion. Hormes is your reliable partner for the Beverage Industry worldwide. We renew complete beverage filling lines, we change existing machines and adapt them to new tasks. We are innovative, competent and have saved experiences for more than 80 years. Manufacturing Range (genuine HORMES): • CIP Units • Flash Pasteurizers/Processing Units • Mixing and Carbonating Units • Crate Washers • Cap Feeding Systems • Caustic Sedimentation Units • Caustic Soda Dissolving Tanks • Label Presses • Conveyors • Ring-Pull-Conversion-Kits • High Pressure Injection (HPI) Units Engineering & Service: - Project planning and realisation as general contractor - Planning and realisation of extensive maintenance activities - Planning and realisation of line optimisationModernized & Overhauled - Complete filling/packing lines for bottles (glass/PET), cans, KEG (barrels), special containers - Single machines for dry and wet area - Processing machines - Special machines Upgrades, Special solutions & Modifications: - Adaption of new formats - Blocking/unblocking of machines - Upgrade of safety areas/housings Electrics & Programming - Switch cabinets, controls - Programming - Visualisation - Modification of existing controls Spare parts - ample supply in stock for beverage production related machines from well-known manufacturers
THOMAS CONSTRUCTIONS MECANIQUES - TCM SAS

France

For over 75 years TCM - THOMAS CONSTRUCTIONS MECANIQUES has been making its skills and technological expertise available to you. Synonymous with innovation and quality, TCM is: - design and manufacture of special machines, integration of peripherals (robotics, conveyor, welding, vibration, optics ...) and use of 4.0 technologies for all business sectors 4.0 - Maintenance and after-sales service for facilities (machine, production line, infrastructure) - Technical upgrading, modernising and retrofitting existing facilities (increased production, mechanical overhaul, electrics and automation, adding telemaintenance peripherals, supervision...) - Safety compliance (securing operators, implementing material or intangible protection) - Project management from drafting specifications to on-site installation including design and creation - A business developer will be your dedicated project contact - a team mobilised for all aspects of your project - With its responsiveness and proven flexibility, TCM is a design office, a machining workshop, a boiler-work workshop, an assembly workshop, an electricity/automation unit on a single site. We provide bespoke and innovative solutions to satisfy your needs. We guarantee we will keep our commitments and the compliance of commissioned equipment.

All the products for "upgrading of electrical systems"

Electrics/electronics: Design and Development

Website See all products
PATELEC-ELPENA SP. Z O.O.

Poland

Patelec Group has been operating on the market for more than 50 years. We deal with copper manufacturing and processing, and our products are delivered to plants designing power tools, submersible pumps, medical instruments, and many more. It’s worth mentioning that all electrical cables, bare wires and strips made by us are subject to strength and ageing tests, and the copper rod processing service is performed according to EN 13602 and EN 60228. Exercising strict control of the entire production process, we also manufacture: – electrical plugs; – flat cables and split flat cables; – PVC cables; – round cables and spiral cables; – electrical wires; – wire rods. Main products in our range are low voltage cables with PVC or rubber insulation for 300/500 V– 450/750 V. We provide cables meeting such standards as SPT, SV, VCTF and SJ. We also produce cable harnesses suitable for supplying of machinery operating in wet environment or fully submerged and on the water surface. Our in-house engineering solutions include Ghelios products manufactured for operation in areas requiring low smoke emission and toxicity in the event of a fire, as well as Thorex products used in hazardous (ATEX) zones. Additionally we recommend a patented Hercules design for high load transfer applications, characterised by water and oil resistance.

Website See all products
OBERLAUSITZER ELEKTRO-SCHALTGERÄTE GMBH

Germany

Oberlausitzer Elektro-Schaltgeräte GmbH was founded in 1992 and today employs approx. 30 people. While switchgear assembly was dominant at the beginning, the production of customer-specific low-voltage switchgear and controls increasingly determine the profile of the company today. Today, the highest expectations and requirements are placed on electrical switchgear and control systems in all areas. Quality, safety and reliability are basic requirements that electrical and electronic systems must meet. Oberlausitzer Elektro-Schaltgeräte GmbH Weißenberg specialises in this. We have many years of experience and the greatest professional competence in all our working areas. Flexibly and at short notice, with components from leading manufacturers and using modern technologies, our qualified employees plan, design and manufacture electric control cabinets, controls and power distribution systems with the aim of always offering our customers the best quality and high benefit.

Website
RAUSCH KONTAKTNIETHERSTELLUNG

Germany

We are a second-generation, owner-run family business. For more than 35 years, we have been supplying discerning customers from the automotive and electrical sectors. Our high standard of quality, flexibility and long-standing, faithful collaboration are highly valued by our customers. Do you need contact rivets? We'll be glad to hear from you. Please make use of our contact information.

RITTER STARKSTROMTECHNIK GMBH & CO. KG

Germany

A passion for energy is the key to the success of medium-sized company Ritter Starkstromtechnik. Our history stretches back more than 80 years, and today we are proud to be an innovative and dependable partner for our customers, offering new projects to combat their everyday problems. We rise to every challenge. We liaise closely with the customer to tailor specialist solutions by means of extraordinary passion and drive from dedicated employees who always give their very best. Today, the company group employs more than 500 people. The company operates six sites across Germany, located in Dortmund, Olfen, Wilnsdorf, Magdeburg, Berlin and Leuna. We are certified to DIN EN ISO 9001 standard and strive to maintain close relations with customers through our wide-ranging services, corporate responsibility, standout products and impeccable customer service. The reliability, innovation and quality of our products are testament to our passion for energy.

Website
FRIEDRICH SCHULTZE GMBH

Germany

Schultze RiRo is a reliable partner in nearly all imaginable applications – we stand out thanks to the extraordinary stability and simple connection of their products. Our finned tube heaters protect your delicate systems against frost. Dirt, moisture or water jets and temporary flooding are not a problem for Schultze RiRos because these trade and industrial heaters fulfil all the criteria of protection class IP 66/67.

All the products for "upgrading of electrical systems"

Finned Tube Heater w/ thermostat

Finned Tube Heater w/ thermostat, low surface temperature

Finned Tube Heater w/ low surface temperature

Website See all products

EMBRO GMBH

Germany

EMBRO GmbH is a manufacturer of electrical heating elements and surface heating elements, silicone heating mats, heating fabrics as well as flexible heating foils and heating systems, textile sensors/RFID antennas/composite applications – carbon preforms/textile electrodes and innovative textiles. We are specialised in developing and producing technical textiles with the help of plaiting/embroidery machines. During this process, conductive threads, strands, wires or heating conductors are laid on substrate material by means of computer-controlled machines. They are then fixed in place with diverse sewing and embroidering techniques and offer a durable, highly flexible incorporation. Modern CAD workstations and corresponding capacities enable us to always react quickly and most flexibly. In addition to this, there is the consistent further development of materials and production technologies, as well as close cooperation with a wide range of external partners such as research institutes.

All the products for "upgrading of electrical systems"

Flexible Heating Pads and Heated Textiles

Website See all products
TECHNOTHERM INTERNATIONAL - LUCHT LHZ ELEKTROHEIZUNG GMBH & CO. KG

Germany

TECHNOTHERM's history has been shaped by its positive growth in the building technology market. Over the past 30 years, the company has established itself both on the national and international markets thanks to its wide product range in the areas of electric heating, high-quality products and innovative solutions (for special tasks). Over time, we have continually broadened and optimised our product range in the areas of electric storage heating, electric partial storage heating, floor tempering, direct heating, marble heating and infrared heating. Our company's key areas of expertise are in the fields of electric storage heating and electric heating. Our continual optimisation of storage heating technology made it possible for housing depths to be reduced considerably. Today's TECHNOTHERM storage heaters stand out thanks to their smart control and regulating systems, modern, timeless design and reliable quality.

Website
KLÖPPER-THERM GMBH & CO. KG

Germany

With over 90 years of experience, Klöpper-Therm from Germany has specialised in development, planning, manufacture and installation of electric heating systems for industrial applications to suit a wide range of requirements. Alongside individual customer requests, all international standards required are taken into consideration during planning and construction. The heating systems can be supplied as explosion-proof for use in explosion hazardous areas (zones 1 and 2) on request. Reliable functioning, the highest quality and great economic benefits of our products form the basis or our reputation as a specialist in electric heating systems. Klöpper-Therm puts this motto into practice for our customers with motivation and the latest technologies. Klöpper-Therm electric heating systems embody the highest quality right from the start.

Website See all products
GRUBE GROUP

Germany

The Grube Group has been meeting the requirements of the market and performing services all around the world since 1974. Using different methods, the company specialises in assembly work for major industrial centres, thermal power plants and petrochemicals. This involves the use of mobile annealing lines and mobile machining equipment, among other machinery. Thanks not only to our long-standing expertise and state-of-the-art technology, but also our exceptional flexibility and mobility, the company is now the first-choice partner for industrial and major customers. In addition, our HR service is available 24 hours a day. A service you can trust. References from successful projects within Germany and abroad. In recent years, the Grube Group has supervised countless projects all across the world – from a chemical park in Belgium to a Russian pipeline in the Black Sea, from Bavaria to Algeria. The Grube Gruppe is always the right choice when particular quality and flexibility are required. We can offer the following for your project, among other services: Sophisticated plant technology, quality-oriented HR services, consumables and accessories, as well as quick and simple order processing. We also provide services in mobile machining technology, cutting, chamfering, machining sealing surfaces, pre-heating and annealing pipework, among other areas. You can find our entire range of products and services at our website www.grube.group. If you have any further questions, please do not hesitate to contact us.

Website
EAE ELECTRIC

Turkey

The EAE Group of Companies embarked on its journey in 1973 with a dedicated focus on designing and manufacturing products and systems to streamline processes for customers, ensuring reliability and cost-effectiveness. Founded by individuals with engineering backgrounds, EAE has consistently placed a high priority on the quality and reliability of its products. In its initial years, EAE Electric Inc. concentrated on the design, manufacturing and sales of electrical distribution systems, covering Busbar Systems, Cable Management and Support Systems. In 1983, EAE Lighting Inc. was established, specializing in the design and production of LED lighting products for office and industrial use. Subsequently, EAE Machinery Inc., EAE Electrotechnic Inc. and EAE Technology Inc. were successively founded in 1996, 2004 and 2009. With a commitment to sustainable growth, product development and exploring new horizons, EAE persistently invests in new technologies, manufacturing facilities, companies and human resources. EAE products are now accessible in over a hundred countries. To cater to its expanding market, the group established sister companies in Italy, the USA, Germany, Australia, France and the UAE. Additionally, EAE maintains marketing offices in Spain, France, the UK, the UAE, India, Saudi Arabia and Turkmenistan. Moreover, a network of distributors and system partners extends EAE's products and services to more than 100 countries globally.

All the products for "upgrading of electrical systems"

Accessory Products

E-Line Binrak Support Systems

E-Line A Support Sytems

E-Line URC-S / URC-SX Trolley Busbar

E-Line TBS Trolley Busbar

Website See all products
ELECTROALFA

Romania

Electroalfa is a Romanian (East European) industrial group that offers design, production and delivery of a wide range of electrical as well as advanced sheet metal products. With a global net of customers, active in a variety of different areas such as: Energy (Low voltage Power Centers &Motor Control Centers, primary and secondary distribution switchgears, prefabricated power stations, wind power converter cabinets) Railway vehicles (traction and energy storage cabinets, EMU/DMU/ HVAC cabinets) E-mobility (ultra-fast charging stations, high-power enclosures) Machine building (including plastic injection, milling, tower cranes) Telecommunications (network trackside and signal cabinets). A wide variety of processes, tools and equipment that can satisfy the needs of the most demanding customers: we use a complete line of technologies for sheet metal production: laser cutting, punching, bending, welding, powder & wet painting, Zinc plating, PU gasketing, assembly. We are processing mild, aluminized, galvanized, stainless and aluminium sheets and profiles. Our team efforts are focused on product optimization and cost efficiency, in order to provide the best quality. Our engineers and project leaders can help you design solutions for specific needs, delivered on time and in the best possible quality. We work with Solid Works 3-D models, as well as other file formats. Our company is certified according to EN 15085 CL 1 for welding process and ISO 9001, ISO 14001, OHSAS 18001.

All the products for "upgrading of electrical systems"

Alfa System steel enclosures

Secondary switchgear

Outdoor cabinets with built-in environment control

PC/MCC Low Voltage Switchboards

Secondary switchgear

Website See all products
COSTRUZIONI ELETTROTECNICHE CEAR SRL

Italy

Costruzioni Elettrotecniche CEAR s.r.l. is a company that has been operating for the last forty years in the electrical engineering and industrial sector. It designs, builds and commissions LV/MV cabinets, Transformer Substations as well as Automation and Control Systems that include the PLCs, SCADAs and HMIs as well as the ATEXs.

Website
S.E.I. SRL SERVIZIO ELETTRONICA INDUSTRIALE

Italy

The company S.E.I. SRL SERVIZIO ELETTRONICA INDUSTRIALE, is a Manufacturer/ Producer, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the industrial electrical systems industries. It is based in Civate, Italy.

G. TORTI

Italy

The company G. TORTI, is a Manufacturer/ Producer, which operates in the ELECTRIC EQUIPMENT industry. It also operates in the ELECTRICAL SYSTEMS, Electric automation, ELECTRICAL SYSTEMS, electric, electronic and pneumatic automated controls, and electrical system installation industries. It is based in Milano, Italy.
ARTELETA TRADING SRL

Italy

Arteleta srl was estabilished in 1944. today Arteleta has new high tech automatic production to satisfy the market demand. Our range of products includes nylon and perlon fishtapes, steel rods, duct rods fiberglass, polyester helicoidal draw in tapes. every rods has many accessories to make esier the job of professional electricians.
ZIEGELMEIER SCHREINEREI

Germany

The company ZIEGELMEIER SCHREINEREI, is a Manufacturer/ Producer, which operates in the Electrical systems and equipment industry. It also operates in the ELECTRICAL SYSTEMS, and ELECTRICAL SYSTEMS industries. It is based in Nördlingen, Germany.
WARM-ON GMBH

Germany

The company WARM-ON GMBH, is a Manufacturer/ Producer, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the electrical heating systems, Underfloor heating, stainless steel pipes, and Stainless steel unions industries. It is based in Lauda-Königshofen, Germany.
DELTA UPS & VOLTAGE REGULATOR

Turkey

In parallel of developing technology, every electric/electronical equipment which we use in our daily life; need stable and clean energy. DELTA UPS&Voltage Stabilizers Inc., provides solutions to confront this demand.Since 1991, situated in state of art production plants in Turkey on a total covered area of 10.000m2 with more than 150 employees, DELTA Inc. producing diverse power electronic solutions, and is one of the few companies in the world which could manage to combine quiet different product ranges, in it’s manufacturing portofolio. Our manufactured products are getting incessantly developed and upgraded, thanks to our highly advanced R&D team skills, studies and works, held in firm cooperation with the Scientific and Technologic Research Council of Turkey. This enables Delta Inc. to clinch it’s domestic and worldwide leader title in AVRs and get a highly respected position in World UPS market. Also it ensures highest flexibility in our production, to answer different customers requirem

All the products for "upgrading of electrical systems"

SP300 Serie

SRV33 Hi Serie

SRV33 Serie

See all products
EL PROFESSIONAL

Poland

The company EL PROFESSIONAL, is a Manufacturer/ Producer, which operates in the Electric cables industry. It also operates in the electrical systems, and electricity industries. It is based in Luzino, Poland.
EMIT METAL ELEKTRIK IMAL. TAAHHUT SAN. VE TIC.LTD. STI

Turkey

As an Emit Metal, we are one of the leading manufacturer of metal cable trays, ladders and trunking systems in Turkey since 2004. We have more than 1000 tone production capacity monthly. Emit continue its business activities successfully at home and abroad in the norms of TS EN 61537, ISO 9001: 2008, CE ve GOST-R, FIRE PROTECTION 90 MINUTES, by means of its innovative approach that underlie its advanced technology investments in the production area and its extensive distribution network across the country. Being one of the leading companies in the industry with its management structure, human resources potential, planned manufacturing , fast solution and quality policy, Emit will continue to grow, develop and increase the values of Turkey.

All the products for "upgrading of electrical systems"

Heavy Duty Type Galvanized Cable Tray

See all products
ORIANO RAGGI

Italy

The company ORIANO RAGGI, is a Manufacturer/ Producer, which operates in the ELECTRICAL SYSTEMS industry. It also operates in the Video surveillance systems, Automation - systems and equipment, domotics, technical consultancy and design services for electric lighting systems, Video surveillance systems, and Automation - systems and equipment industries. It is based in La Spezia, Italy.
ELEKTRYK SP. Z O.O.

Poland

The company ELEKTRYK SP. Z O.O., is a Multi-Category, which operates in the Electrical systems and equipment industry. It also operates in the ELECTRICAL SYSTEMS, system management, ELECTRICAL SYSTEMS, and guides for electrical panels industries. It is based in Kalisz, Poland.
CABLOTEC - CABLAGENS E SISTEMAS, LDA

Portugal

The company CABLOTEC - CABLAGENS E SISTEMAS, LDA, is a Manufacturer/ Producer, which operates in the Electric cables industry. It also operates in the Electrical & Electronic Components, Cabling for rairoads, Components and systems for electrical installations, Electrical & Electronic Components, and electrical systems industries. It is based in Abrunheira-Sintra, Portugal.