Results for

Manufacturer Producer - Professional abrasives

17 Companies

16 Products

BLASQEM, LDA.

Portugal

BLASQEM is the specialist in shot blasting, abrasives and surface treatment equipment for industry: sanding and abrasive projection or shot blasting. References: STEEL AND STAINLESS STEEL SHOT, SANDBLAST, GLASS OR CERAMIC MICROBEADS, SILICATE or SLAG, SILICA CARBURETTA, GRENAT, PLANT OR PLASTIC ABRASIVES. SHOT BLASTERS, PICKLING BOOTHS AND TANKS, SANDING ROOMS. Water jet cutting and metallisation. Finish for additive manufacturing. ISO 9001, 14001 and 45001.

All the products for "professional abrasives"

Ceramic Shots and Abrasives

Metallic shots and abrasives

Glass shots and abrasives

Glass shots and abrasives

Vegetal shots and abrasives

See all products
URALGRIT

Russia

UralGRIT LLC manufactures mechanical abrasives – copper slag, nickel slag, powder for water jet cutting, and restoration powder under own trademark Uralgrit. Uralgrit’s materials are used for corrosion protection of any surfaces and performance of blast cleaning. All-purpose slags of Uralgrit are professional abrasives: -as opposed to silica sand, use of granulated slag is safe for sand blaster operators; -have wide range of particles consisting of 11 particles; -have minimum level of dust (weight content of particles with a weight less than 0.2 mm does not exceed 5 %); -have constant chemical composition. Below are the advantages of collaboration: -Possibility of copper slag and nickel slag manufacture with any particle size within 0.1–3.0 mm. -The manufacture is certified in accordance with standards ISO 11126-3, ISO 11126-5. -High performance and efficiency of abrasives for Uralgrit metal are confirmed by more than 30-years experience of use in the field of ship building, ship repair, bridge building, steel structure handling, oil and gas industry. -The company’s specialists will give advises related to anti-corrosion and select particles to ensure the required profiling. 3 production sites of Uralgrit are located in Russia. Uralgrit is the member of the Federation of European Producers of Abrasives (FEPA).

All the products for "professional abrasives"

Nickel Slag 0,8-3,0 mm

Copper Slag 0,5-3,0 mm

Copper Slag 0,2-1,6 mm

Nickel Slag 0,5-1,5 mm

See all products
4CR INTERNATIONAL GMBH

Germany

4CR has set a global benchmark for automotive refinishing since 2004. Across 78 countries and with over 1600 products, we have maintained the same philosophy – to always be available at the right time with the right solution. Four of us founded 4CR close to Hamburg in northern Germany. Today, we are the loyal partner of thousands of automotive painters in over 78 countries and always feel like we're one big family. We have our roots in Germany, where we embraced the values of precision, reliability and pride in our craftsmanship. We offer an impressively comprehensive range of over 1600 products. In 2024, we will be celebrating 20 years on the market, during which we have continuously grown and benefited from your valuable feedback. 4CR's product line for painting and varnishing is the result of our experience combined with your feedback. We would like to thank our partners for this and to warmly welcome you as a new partner of 4CR.

All the products for "professional abrasives"

3200 Purple 150 mm velcro - 21H P40

3200 Purple 150 mm velcro - 21H P500

3200 Purple 150 mm velcro - 21H P60

3200 Purple 150 mm velcro - 21H P600

3200 Purple 150 mm velcro - 21H P400

Website See all products
GELTEK-MEDICA LTD

Russia

Geltek-Medica company is the largest Russian manufacturer of medical contact media for ultrasound and functional diagnostic, eyelid care products and professional skin care products. Quality standards: ISO 13485-2017, ISO 13485: 2016, ISO 22716 (GMP standard). Professional and home care skin care products for mature skin, dry and sensitive skin, oily and problematic skin, body care products etc. That include proven ingredients and balanced formulas that potentiate the effect of each other, modern ingredients and technologies for the production and delivery of active ingredients into the deeper layers of the skin: peptides, stable forms of vitamins, liposome complexes, safe UV filters of the latest generation. Products undergo two-stage clinical trials. Eyelid care products are indispensable tools for the treatment of eyelid demodicosis and blepharitis. Reduce inflammation, eye fatigue and the dry eye syndrome, restore tear secretion due to wearing contact lenses and working on the computer for extended time periods. Geltek-Medica medical product range involves: Uniscrub - an abrasive scrub used for reducing skin impedance and roughness of the upper skin layer, as well as for skin moisturizing, that allows to acquire high-quality test results without causing any discomfort to a patient. Unipaste - a highly conductive adhesive electrode contact paste for electroencephalography (EEG), electromyography (EMG) and evoked potential (EP) registration of the brain.

See all products
ANT APPLIED NEW TECHNOLOGIES AG

Germany

We produce systems for the WAS (Water Abrasive Suspension) cutting process. ANT AG was set up in July 1999 and since then has successfully specialised in the fields of WAS cutting technology and special-purpose machinery. We produce systems for the WAS (Water Abrasive Suspension) cutting process. Various venture capital investors have taken shares in the company and see an expanding future market for this technology. At ANT professionell and motivated staff is necessary. The training and experience as well as the personal commitment of each individual guarantees the high quality and functionality of our systems and their successful application at the customer’s site. We ensure our technological know-how by having a great proportion of our staff as engineers. Since 2007 ANT AG has voluntarily been certified according to DIN EN ISO 9001: 2015 and thus fulfills comprehensive criteria for a professional and reliable quality management in the company.

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

SMIRDEX S.A. COATED ABRASIVES INDUSTRY

Greece

Smirdex is one of the leading manufacturing companies of coated abrasives in South-Eastern Europe. Located in Nothern Greece, at an area of 32.000m2. Smirdex produces coated abrasives of high quality since 1981. Thanks to the continuous efforts for improvement of its specialized staff, the company has managed to grow bigger and meet the demanding standards of the industry. Today the company exports to more than 50 countries worldwide. 80% of its production is sent abroad whilst 20% is distributed in the Greek market. Our major goal is to encounter the evolving needs of modern professionals and therefore we constantly invest in research and development. Recently, we have designed and built up a second production plant. High standards of quality control throughout the manufacturing process are ascertained by sophisticated, on-site electronic systems whilst the continuous product evaluation ensures the highest quality according to the industry’s standards. Products: AutomotiveVelour discs and rolls, waterproof papers, fiber discs and sponges for the car refinishing.WoodHeavy and finishing abrasive papers, velour discs, narrow and wide belts for wood sanding. MarbleVelour discs, fiber and diamond discs, marble cutting wheels. ConstructionsVelour discs and soft interface pads for building applications.Metal AbrasivesHeavy-duty and flexible abrasive clothes, metal wheels and non-woven products.Accessories AbrasivesBacking pads, masking tapes, soft intermediate pads etc.
MASTER BELT LTD

Bulgaria

Conveyor BeltPlastic conveyor belts thanks of their wide range of variety and quality that are used in sectors such as industry/Crafts, production and processing but also in many others. Every industry needs a different film type, different heights, widths and linens but transportation it's for the same purpose and production support, that is why we provide our conveyor belts through a wide range of European specifications to serve the most demanding application. Treadmill BeltTreadmills belts applied to professionally and household machines. Imported by our company and process depending on their application in length and width. The coarsesurface type holds firm athlete's foot while with the silent and anti-static form delivers quality results.Pvc CurtainsPvc curtains for indoors and outdoors apllications placed at doors and industrial partitions. Material it is specifically designed from (PVC), transparent and with abrasion resistance.Protects from dust and winds.Plastic pvc curtains for refrigerators are placed for the best energy savings that touches 95%. the material is specially designed by (vinyl polychlwrioycho), transparent and abrasion resistance at temperatures up to-40 ° c. Also protects the site from dust and insects.Our company was founded in thessaloniki in 1994. The initial idea to provide solutions in the field of foods -and not only- did not take long to come. We set up our company with bravery, urge for work and vision. After we entered the field of food we
DIAMOND BLADE DIAMOND TOOLS DIAMOND SEGMENT

Italy

Founded in 1960, La Nord S.r.l. is an Italian Company manufacturing diamond discs and segments suited for cutting ceramic tiles, marble, granite and large blocks of stone. Emerging in one of the most important Italian granite industrial areas (Val D’Ossola), we are specialized in cutting granite and other stone materials. Thanks to a great deal of experience and demand from Italian and foreign markets our products are extraordinary suitable for other materials such as cement, asphalt, ceramic porcelain stoneware, and refractory parts. Persistent ongoing research and innovation leads La Nord to process other products (combined materials) suitable for the new market.MISSIONFinding the right mix between the cutting system and the durability of the tools for each type of materials and machines used. Our experience helps us to say that nothing is impossible. PARTNERSHIP Local and professional support for our customers to ensure continuous product improvement. We first meet our customers and then develop the right solution for their needs. ”Each quote is worthy of consideration” OSA MARKING Diamond discs and the flexible-tooling products are International Organisation for the Safety of Abrasives (OSA) marked. OSA markings grants assurance to the consumers of La Nord the usage of the best quality in ISO certification standards and EN safety rules. MADE IN ITALY Thanks to more than 50 years of experience, diamond segments are fully pre-printed, sintered and welded in Italy.
SPAJIC DOO

Serbia

Spajic® Company specializes in production of steel fibers and cut wire abrasives, as well as the machines for their manufacturing. Since it was established in 2002, our company has distributed worldwide. High results we have achieved for the last seventeen years placed Spajic® Company among the leading in its branch in the world market. Today Spajic® Company is unique at the territory of Serbia for its products and services that meet the highest international standards. We continue to improve the quality of our products and services, and the quality and trust of customers. We aspire to continuous development of technology and personnel as well as to preservation of the environment. By working with Spajic® our Clients are assured of the highest standards of professionalism, quality and efficiency of services as further based on our years of experience and capabilities.The company patented its products and expended its range and services also to the manufacture of heavy duty machines for steel abrasives production.The Company’s Quality Management System has been recognized and registered to the ISO 9001 standard in year 2009 by TSUS the accreditation body of Slovakia, being the first steel fiber manufacturer in Eastern Europe.Every delivery that Spajic® company makes is tested in our own laboratory. All our customers receive test reports made by our technical department to confirm the quality of goods.
NOVOVODOLAZKYI ABRASIVE PLANT LTD

Ukraine

Novovodolazkyi Abrasive Plant is a Ukrainian factory, founded in 2012, specialized in production of resinoid bonded abrasive cutting and grinding discs with reinforcing elements. The first abrasive wheel was made in 2013. We produce abrasive wheels under our brand NovoAbrasive. This trade mark has been the most devlopping in Ukraine`s abrasive industry. Besides, we are professionals in production of cutting and grinding disks under private label of our customers. Novovodolazkyi Abrasive Plant is the first abrasive plant in Ukraine to pass testing and get MPA certification in Hannover, Germany confirming compliance with EN 12413 European safety standard. We are in process of application for the oSa certificate, expecting to get if in 2016. In 2015 the NAP got ISO 9001: 2008 certificate. The products made by the NAP are exported to a variety of countries, such as Moldova, Belarus, Georgia, Hungary, the Czech Republic, Germany, the UK, Egypt and many other countries.

DFZ

Ukraine

DFZ is a modern production company specializing in the production of professional restaurant porcelain of European quality. TM FARN is line for Hotels, Cafe and Restoraunts. Products TM "FARN" have a high degree of resistance to sudden temperature changes and abrasion damage. Porcelain TM «FARN» is distinguished by its whiteness, strength, attractive design, ease of use, and has a special luster.Our range of porcelain tableware has everything that you may need in the most demanding restaurant, cafe, and bar: porcelain plates, cups, salad bowls, herring dishes, serviceware, casserole dishes, coffee and tea porcelain, gravy boats and more . You can use porcelain in microwave, convection furnaces, ovens and dishwashers (15 000 cycles per years).
RESTORATIVE TECHNIQUES

United Kingdom

RESTORATIVE TECHNIQUES are a specialist company with a wide range of in-house technical skills, including professional expertise of materials and substrates. They offer professional consultancy on historic restoration and conservation projects and those involving cleaning and coating removal, and have earned a well-regarded reputation for supplying industry-leading thinking and safe, appropriate, effective and environmentally-friendly techniques and solutions. They also design, engineer and manufacture proven market-leading specialised cleaning machines dedicated to conserving historic architecture, including the portable and versatile ThermaTech superheated water-based surface cleaning system and the gentle but effective VorTech advanced abrasive system. Their products are now regularly being specified, and are in daily use for many landmark and notable structures and landmarks around the world. What distinguishes them from many other suppliers is that as a company they directly draw upon approximately 100 years of professional experience, technical skills, and knowledge of supplying to the historic building environment. They are led by Jamie Fairchild, who alone brings over three decades of experience and technical knowledge, and whose expertise is often sought out by academic and research institutes and highly respected governing organisations. They employ a team of dedicated and experienced individuals, who care about providing a first-class service to their customers.

Product recommendations

Germany

Germany

Germany

Germany

See more products

DERBY CONVEYOR BELT

Turkey

Derby has been manufacturing rubber conveyor belts with textile carcasses for over 30 years. With the know-how, innovation-based technology we hold in our well-equipped laboratory, and customer-focused sales strategies, we lead the rubber industry not only in Turkey, but also ahead of our international competitors. Derby has proven its professional approach to its international customers, while meeting globally accepted standards. (DIN and ISO) The industries we work with include cement factories, coal mines, iron & steel factories, ports, stone quarries, paper factories, and sugar factories. Our product range includes: - Profiled (Chevron) Conveyor Belts- Flat Conveyor Belts- Endless Conveyor Belts- Abrasion-resistant Conveyor Belts- Flame-resistant Conveyor Belts- Oil-Resistant Conveyor Belts- Heat- Resistant Conveyor BeltsWe look forward to working with you. Please feel free to contact us from our office number.
BIMO TECH

Poland

ISO 9001 & 14001 certified custom manufacturer and distributor of heat resistant and corrosion resistant metals and alloys in different forms including bars, pipes, tubes and tubing, wires, rods, sheets, plates, coils, angles, channels, springs, blanks, flanges, cylinders, discs, pins, fasteners, plugs, rings, rolls and strips. Metals we provide include: tungsten, tungsten carbide, molybdenum, niobium, tantalum, zirconium, titanium, nickel, copper, powders, and rare earth metals. We also produce a complete range of components, sputtering targets, resistance welding electrodes, custom shapes, and machined parts. We specialize in metallurgical testing and custom component manufacturing carried out by highly-skilled teams of professionals. The strict requirements we demand in every phase of production makes us an ideal partner for sensitive projects. Markets served include chemical, automotive, industrial, aircraft and aerospace, medical, sports, power generation, marine, mechanical, construction, food and beverage. No matter your need, the size of your order, or what industry you are in, we do our best to supply your products on-time, of the highest quality, and the best value. A non-exhaustive list of our services includes: filling all types of custom packing and delivery requirements, precision grinding and polishing, abrasive and bandsaw cutting, shearing, grit blasting and cleaning, ultrasonic and dye penetrate testing, and applying special protective coatings.
LENENAMEL D.O.O.

Slovenia

Lenenamel is specialized in the production and supply of enameled products for use in architecture, construction, interior design and visual information. Our product range has been specifically designed to provide solutions needed to create aesthetic and functional results. We are widely recognized by industry professionals as an innovative and trusted brand. Our specific products are: - Enamel facade panels - Enamel wall panels - Enamel panels for industry and infrastructure - Enamel signs - Enamel boards for schools and offices Advantages of Enamel - Hard and durable, resistant to abrasion - Resistant to UV exposure - Resistant to corrosion - Graffiti easily removed - Many design solutions - Available in different shapes, sizes and colors We are equipped with a state-of-the-art production line, which is constantly upgraded to meet high quality and precision manufacturing standards. Our production line allows us to produce flat panels with maximum dimensions of 2400 mm x 5000 mm and curved panels with maximum dimensions of 2400 mm x 5000 mm. We offer an almost unlimited array of colors and shapes. Lenenamel also has a sophisticated enameling laboratory and engineering support organization, utilizing the latest software and analysis tools. Our highly skilled workforce is dedicated of ensuring the highest quality standards through the complete production process. All departments of our production are ISO 9001 certified.
ECC KIMYA SANAYI VE TICARET LTD STI

Turkey

In 1980, ECC Chemical Industry Limited Company, first established in Istanbul, started the first production by Copper Oxide, then continued with production of paint, enamel, ceramic pigment industries. Completed the investment by established factory on an area of 20, 000 m2 closed field in 1990, Aydın, Turkey, also by being ecofriendly, started the production of metal surface treatment chemicals, construction chemicals, water treatment chemicals and cleaning materials, , abrasive additives. By taking hazardous and non-hazardous waste recycling license in 2012, started the process of recovery of metals, inorganic waste, iron metal burrs and also stripping metal-covered ABS plastics. With the professional chemists and experienced personel, ECC Chemical Industry Limited Company, continue their production process with international quality norms and do the sales on both domestic and foreign markets. The chemical products produced by our company are used in the coating sector, the electroplating sector and the marble sector. Inorganic chemicals are sold to the companies producing surface treatments and electro-metal coating . In addition, our company sell in the sector which is known as abrasive department of marble sector, produces marble surface treatment material.
PROMETAL GROUP

Latvia

Prometal Group is equipped with modern CNC technologies, CAD design and experienced workers team.We provide: CNC lasercutting; CNC bending; CNC abrasive water jet cutting; welding; machining; painting and assembly services; We offer: professional solutions; modern technologies; fast an quality services; non-standard solutions; longterm partnership; CAD design; Prometal Group is your one-stop shop to FULFILL YOUR IDEAS IN METAL!

Filters

Results for

Manufacturer Producer - Professional abrasives

Number of results

17 Companies